PROVN OF WASHROOM AND CHANGING ROOM AT OFFICERS MESS ADDITION ALTERNATION OF GUEST ROOMS AT OFFICERS MESS BLDG NO T 243 OF HQ 330 INF BDE AND PROVN OF 23 X SECURITY LED STREET LIGHTS WITH POLES TO FOREIGN TRAINING NODE AT AUNDH MIL STN UNDER GE MH A

Amount

M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, soft/loose soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10sqm on plan and n. exc 1.5m in depth and getting out complete all as specified and directed.

Excavation in trenches for taking out/laying of pipes line not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide in hard dense soil complete and all as specified.

M&L for cement concrete type D2 1:4:8 (40mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed.

Returning, filling in, soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for sand filling under floors or in foundations in-cluding spreading, levelling and well ramming, watering and consolidation complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded stone aggregate) masonary with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for hardcore of guage exc 63mm but n exc. 100 mm, with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of PCC floor complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in floor finishing the surface even and rough for receiving floor finishes complete all as specified and directed.

M & L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even complete all as specified and directed.

M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces with using WPC on top layer complete all as specified and directed.

Supply only integral water proofing compound .

M & L for preparation of new plastered surfaces and applying two coats of oil bound distemeper over a coat of alkali resistant primer on plastered surface including 3mm thick putty complete all as specified and directed.

M & L for preperation of new or untreated surfaces and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for rendering 10mm thick, on fair faces of brick work or concrete surfaces of ceiling in CM 1:4 with finished even and smooth all as specified and directed by Engr-in-Charge

M&L preparation of new plastered surfaces on ceiling and applying two coats of white wash over 3mm thick wall care putty finished even and smooth complete all as specified.

S&F powder coated aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as directed

S&F 12mm thick toughened glass nor transparent ( Make as per approved list of make and as approved by GE) doors upto 2.10m height of as per the requirement and proper machine edge finish in angle and fixed over the flooring eith aluminum U channel, glass panel to be formed as per approved modules 12mm thick clear toughened glass edge polished and accurate design holes including floor spring (Make as per approved make), glass door lock with three brass keys of approved make, stainless steel long door handle both side ( ISI marked) all works including finishing with frosted desing film of any type and as approved by GE etc complete all as specified and as directed.

S&F Non Transparent Toughened glass 8mm thick in aluminum door/ partition and glazing in each panel with rubber packing complete all as specified and directed.

Supply only 5.5mm thick sheet glass ordinary quality and glazing exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F powder coated aluminum deco grill of approved pattern using channel of required size, screwed to windows & ventilators with self tapping screws complete all as specified & directed

S&F aluminium louvered ventilators of section size 100mm x 25mm x1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator including taking down ol ventilator all as directed by Engr-in-Charge. Note : Making good of wall surface with matching to existing surface complete all as specified and directed.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition)

M&L for RCC M-25 design mix (20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-25 design mix (20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 Design Mix (20mm graded aggregate), foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item No 34 here-in-before but 6 to 8mm dia bar.

M&L for formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffit of foundation and plinth beam and similar work similar or batter for rough finished surfaces of concrete in flat.

M&L formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports over hang etc and similar works for rough finished surfaces of concrete in flat.

M&L for formwork to soffits of sus-pended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Ho-rizontal or sloping) finished for rough finished surfaces of concrete in flat..

M&L coloured vitrified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No. 38 above but as in skirting /dados including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Granite slab 18-20 mm thk machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polshing rounding moulding etc, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1 :6, complete all as directed.

All as per item No 40 above here in before but 20 mm thick Machine cut Cudappah stone in floor or in any position of any colour and shape complete all as specified and directed.

M&L for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade, angle 24mm x 24mm x 0.43mm, 'T' section 24mm x 25mm x 0.30mm and main runner 'T' section 24mm x 38mm x 0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c, hanging with 2.50/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of plastic emulsion paint over one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge.

S&F POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction complete all as specified.

M&L for applying roof treatment as under :-

(i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacturer's instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment complete.

(ii) Providing a coat of bitumen primer @ 0.40 Litre/Sqm over plastered surfaces of roof including parapet surfaces.

(iii) Providing one layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm, reinforced with polyester non woven fabric (weighing not less than 150 Gms/Sqm). Polymeric membrane shall be taken to a height 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note: (a) Laying of APP based polymeric membrane shall be done by torch application method or as per manufacturar's instruction. (b) Side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's instructions. (c) The make of polymeric membrane shall be as per PS specification of CA.

(iv) Applying two coats of bituminous aluminium paint on top of APP membrane.

S&F in repairs 20mm dia CP curtain rod complete all as specified and directed

S&F in repairs bracket of fancy type curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) complete all as directed by Engr-in-Charge

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 61 kg and fixed all as specified and directed.

Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each and re fixing in other opening complete all as specified and directed.

Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each complete all as specified and directed.

Demolition of precast cement concrete block / stone masonry built in cement mortar including all quoins, arches, pillars etc

M&L chequred cement concrete coloured tiles 30 cm x 30 cm x 20 mm thick, glossy finished set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigments laid over 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L for non-skid ceramic coloured tiles (300 x 300 mm) x 7mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L Coloured Glazed ceramic tiles 450x300x7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F one piece EWC snow white 670 x 365 x 740 mm One-piece EWC P with slim seat cover including connection to drain (or outgoing pipe) & fittings P Trap complete all as specified and directed. Make : Cat. No. S1013201 of Cera or equivalent of Jaquar/ Somany

S&F Table top wash basins 400 x 360 x 180 mm complete all as specified and directed. Make : Cat Part No. S2020106 of Cera or equivalent of Jaquar/ Somany

S & F chromium plated shower trendsetter SS Rain SS 304 200 x 200 mm (8″ x 8″) sleek design delight mode Rejuvenating Easy-to-Clean Easy Installation including fixing to steel pipe or union. Make Cat Part No SKU F7010110SS of CERA or equivalent in Jaquar or Somany

S&F 5-way single lever concealed diverter system consisting of Exposed part (lever, tip ton knob, flange) and concealed part (cartridge with button assembly, cartridge sleeve) complete all as specified and directed for mixing hot & cold water screwed down for iron pipe and fixed to bore pipe 15mm all as specified. Make : Cart Part No Exposed part F1016711 Concealed Part F4020101, SKU: F1016711 of CERA or equivalent of Jaquar or Somany)

Supply of bath tub spout with wall flange Cat.No F1016661 (Make : Cart Part No F1016661 of CERA or equivalent of Jaquar or Somany)

S&F towel ring of brass chromium plated 150mm x 200mm 'C' type complete. Make : Cat Part No :F5001105 of CERA/ Jaquar/Somany

S&F Towel Rack 600mm long CP Brass complete fixing to wall with fittings. Make : Cat Part No F5002101 of CERA/Jaquar/Somany

S&F Soap Dispensor CP complete fixing to wall with fittings. Make : Cat Part No F5002111 of CERA/Jaquar/Somany

S&F Paper holder with flap gaurd CP brass complete fixing to wall with fittings. Make : Cat Part No F5002110 of CERA/Jaquar/Somany

S&F Tumbler holder CP of brass complete fixing to wall with fittings. Make : Cat Part No F5002110 of CERA/Jaquar/Somany

S&F in repairs CP two way bib taps screwed for iron pipe 15 mm bore and fixed necessary fitting with and incl PVC connection all as specified and directed Make : Cat part No F1016163 of CERA or equivalent in Jaquar/Somany

S&F Wall mounted single lever basin mixer consisting of exposed part and concealed part screwed for 15mm bore GI pipe and necessary fittings complete all as specified and directed. Make: Cat Part No Exposed part F1016473, concealed Part F4065102, SKU: F1016473 of CERA or quaivalent in Jaquar/Somany

S&F Telephonic hand showers with/without wall hook and hose hand shower 110 mm dia (4”) with 3 flows, wall hook, and a 1.5 metre hose Magic Sprinkle Mode, Sprinkle Mode, Delight Mode, Rejuvenating, Comfort Touch, Easy-to-Clean screwed for 15 mm single lever divertor complete all as specified and directed. Make : Cat Part No F7030112AB of CERA or equivalent in Jaquar/Somany

S& F Soap dish CP size 160 x 160 x 90 mm,fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of 600 mm long complete all as specified and directed.

M&L 100mm dia CI Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Cutting chases, pinning in PCC block/brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good, cutting n.exc 10cm girth, complete all as specified and directed.

S & F 15 mm bore galvanised steel tubes medium grade with all connections and fixed to walls and ceiling or laid in floors complete.

S & F 20 mm bore galvanised steel tubes medium grade with all connections and fixed to walls and ceiling or laid in floors complete.

S & F angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm. Make : Cera/Jaquar/Somany

S&F Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S & F 20mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 ltr hoisted and fixed in position including 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints laid in trenches or floor complete all as directed.

S&F PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed and laid in trenches or floor complete all as directed.

S&F PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius, for 110mm dia pipe all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm dia pipe all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed by Engr - in - Charge.

M&L for riddle earth including spreading, levelling and hand punning to underground cable in trench all as specified and directed. Note : Punned thickness shall only be measured and paid.

M&L for brick protection with Class "B" Bricks all as specified and directed.

Supply only GI tubing light grade 40mm bore, ISI marked, for cable protection in trenches/ walls all as specified and as directed.

S&F Steel tubular swaged pole complete with cast iron base plate, finial taper plug bolts nuts and screws as specified type 410 SP-31 (9m long) confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified. Note : Excavation and earth work and PCC will be measured and paid separately.

M&L for PCC M-10 grade (nominal mix) using 40mm graded stone aggregate as in foundation for filling in, mass concrete for foundation of street light Pole and road cutting, etc complete all as specified and directed.

M&L for PCC M-15 grade (nominal mix) using 20mm graded stone aggregate as in coping of new pole including necessary form work complete all as specified and directed

S & F LED street Light 60 W highly efficient LED street light made of pressure die cast aluminium housing with HIGH POWER LEDs, lens & toughened glass, IP66, complete & wired with all accessoires. Make: Halonix Cat part No :HLSLD-15-60CWL-R /Wirpro/Jaguar

Supply and fix sheet moulding compound (SMC) Junction box size 185x 165 x 60 mm inner dimension, hinged door, including three phase 100 Amps 4 pole baklite terminals for street light control mounted on pole with the provision of cable entry and exit. Make: Sintex or equivalent make of L & T

Supply and fixing 10 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

M & L for light grade GI pipe of size 80 mm dia ISI marked, for cable protection complete all as specified and directed by Engr - in - Charge.

M & L for submain wiring with two run of 1.50 sqmm FR PVC sheathed multi stranded copper conductor cable and one run of 1.5sqmm FR PVC sheathed multi stranded copper conductor cable as earth wire, from street light fitting to looping box thorugh inside pole and necessary cutting for making hole on pole complete all as specified and directed by Engineer-in-Charge.

M & L for earthing complete with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 3.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical palte No 3 of SSR part-I, GI wire suitable size and length for continuity earth wire from test point to main distribution Board complete all as directed. Note: Rate for achieving required depth by compressor machine/breaker if required is deemed to be included in item unit rate.

M & L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in to and including concealed PVC conduit of suitable dia includings sunken to wall including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete and al so making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including modular box including cover plate & suitable size for housing switch, socket, regulators etc complete for the following:-

(a) One light point controlled by one switch

(b) One Fan point controlled by one switch

(c) One 5 pin 6 Amps socket outlet on independent board.

(d) One 5 pin 6 Amps socket outlet on same board.

(e) bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size.

All as per item No 02 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor FRLS 1100 v grade but sheheted single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts grade for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire.

All as per item No 02 here-in-before but wiring with 4 sqmm single core multi stranded copper condcutor FRLS 1100 v grade but sheheted single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts grade for geyser point and 4.0 sqmm cable as earthwire.

S & F modular switch type 250 volts single pole one way 1 module 6 Amps all as specified and directed

S & F modular socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed.

S & F Modular switch single pole one way switch 16 Amps all as specified and directed.

S & F Modular socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket of 20 Amps complete with one single pole MCB of 20 Amps SP

S & F PVC ceiling rose surface type three terminals type complete all as specified and directed.

S & F modular fan regulators electronic step type suitable for 1200/1400 mm sweep ceiling fans. 120w - 2 module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix LED Bldg light 36 W IP 65 complete all as specified and directed.

S & F for New Ceiling fan, complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

S & F distribution board factory made TPN 4 way in, 415 Volt, Double door metal type suitable for provisioning and fixing MCBs as out going and including SPN MCB 32 Amps as main incoming all as specified & directed. Note; Cost of MCBs will be measured and paid seperately.

S & F distribution board factory made SPN 8 way in, 240 Volt, Double door metal type suitable for provisioning and fixing MCBs as out going and including SPN MCB 32 Amps as main incoming all as specified & directed. Note : Cost of MCBs will be measured and paid seperately.

S & F MCB TPN 63 Amps 'B' series 25 KA with two position DIN Rail clamp complete all as speicified and directed.

S & F MCB SPN 32 Amps 'B' series complete all as speicified and directed.

S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp complete all as speicified and directed.

Supply & fix AC single phase LPRF type static energy meter of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 5 - 30 A, (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power all as specified and directed by Engr-in-charge. Make : L & T/HPL

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor of size 6 sqmm 1100 volt grade drawn through suitable PVC conduit including 6 sqmm PVC multi standard cable in green colour for continueous earth wire complete all as speicified and directed. Note : 6 Sqmm cable two run, 6 Sqmm cable one run in PVC conduit one run is measured as one RM.

Supply and fixing of Electric Storage water heater of capacity 25 Ltrs of Five star rating, AC 230 Volts with four numbers nut bolts duly groutted in walls including all standard accessories with flexi connection pipe of 450 mm size, glass line tank, NRV complete all as specified and directed

Supply and fix exhaust fan, steel body AC single phase. 230V of size 300m sweep with, blades, and frame and louvers and exisitng C/F deposited to MES store yard complete all as specified and directed

AJINKYA VIKRAM GAIKWAD

Aishwarya Constructions