SPL REPAIR TO TOILET BLOCK BLDG NO 307 AND 308 (OR SINGLE ACCN) AND PROVN OF 02 X BATHROOMS UNDER AGE B/R-I AT ITARANA, ALWAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Dismantling PVC (SWR) pipe in any position, bore or pipe 110/75mm complete all as specifed and directed

M&L demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing the domolisd material out side of defence land all as specifed and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of reinforcement cement Concrete in Roof, floors(Other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as directed.

M&L fly ash brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste.

M&L repairs to sunken floor slab with the following specifications:- (a) Roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing admixture as per manufacture's instructions over bottom and vertical surfaces contact with sunken slab, finishing the surface even and smooth using extra cement. (d) Damp proof course on horizontal surfaces with scrapping and properly cleaning the surface to remove loose particles & applying one coat of self priming (33% dilution) and two coats of undiluted material with @ 10.67 lts per 10 sqmt as Damp proof for water proofing ,and Damp proof course on vertical surfaces scrapping and properly cleaning the surface to remove loose particles and applying one coat of self priming (33% dilution) and one coats of undiluted material with @ 4.85 lts per 10 sqmts. Damp proof for water proofing. Make of DPC solution :- Asian/STP/Choksey/Pidilite. (e) Brick bats filling under sunken floor. (f) PCC 1:3:6,type C-2,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase to receive tiles. Note :- For payment purpose only floor area shall be measured.

M&L providing cement concrete as in coping PCC 1:2:4 Type B-0 using 12.5mm graded aggregate with & including necessary form work complete all as specified and as directed.

M&L use and waste of form work to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as specified.

M&L form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC /PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed.

M&L reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specifed and directed.

S&F mild steel TMT round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

All as per item No 14.00 above but 6mm dia to 8 mm dia.

All as per item No 14.00 above but 5mm dia and over up to & including 10mm dia in stirrups, spacers & binders.

M&L 75mm thick cement concrete (1:3:6) type C1 using 20mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with bituminous mastic filling including necessary form work complete all as specified and directed.

M&L 50mm thick cement concrete (1:3:6) type C1 using 20mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with bituminous mastic filling including necessary form work complete all as specified and directed.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20 to 25mm thick size not less than 22" x 22" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick cement screed bed in cement mortar 1:6 including rubbing and mirror polishing complete all as specified and as directed.

M&L kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 including cutting, moulding outer edges, rubbing and mirror polishing complete all as specified and as directed.

M&L rubbing and polishing to exiting kota stone flooring including skirting /riser to achive mirror finish all as directed.

M&L coloured non skid ceramic tiles (1st quality) 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc., laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles (1st quality) in vertical surface 375mm x 250mm x 7-8 mm / 450mm x 300mm x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles(1st quality) in vertical surface 300mm x 200mm x 7-8 mm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement & Sand Mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.00 Sqm each.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each.

S&F mild steel framed work such as grills, gratings, etc using angle iron, flat iron, round bars with end of bars shouldered and or rivetted or forged into spikes, framed guard bars barred into iron doors ,walkways railing framework amd similler work confiming to Fe 290 ,GDE E-165 all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

M&L aluminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators half fixed and half louvers type and small window single leaf cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. Note (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.

Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete.

S&F stainless steel wire cloth, 1.18 mm nominal dia of wire and average width of aperture 0.56mm and fixed with tinned tacks or galvanised wire staples complete.

S&F butt hinges, cold rolled mild steel, 100mm medium weight and fixed all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised all as directed.

S&F aluminium alloy, anodised, 300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of stone/ brick masonry or concrete surfaces, finished with even and smooth complete all as specified and directed.

M&L rendering 15mm thick other than fair faces of stone/brick masonry in cement mortar 1:6 on fair faces of stone masonry or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (with sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified

S&F in repair vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed.

S&F vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle including Flush Pipe of polyethylene of low or high density or PVC 32 mm dia for low level cisterns and brackets after taking down old cistern all as specified and as directed.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle including Flush Pipe of polyethylene of low or high density or PVC 32 mm dia for low level cisterns and brackets after taking down old cistern all as specified and as directed.

M&L 16-18mm thick granite black colour (table rubbed and polished) in cooking/Washbasin platform, staircase treads and like jointed over and including 15mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, compltee all as specified.

S&F in repair vitreous china under counter basin size 560 x 450 x 185 mm shape ovel of Somany Cat No SKU: 17111025001101 or equivalent of PARRYWARE / JAQUAR / SOMANY / PRAYAG as approved by GE including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.

S&F Vitreous China wash basin (WHB), white, flat back, size 550mm x 400mm excluding taps and plug but including Angle Iron brackets, CP waste coupling, PVC Waste Pipe complete allas directed.

Dismantling water tanks capacity exc 500 & n exc 1000 Litres of any description complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed.

S&F in repairs 20mm bore ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. (Minimum wt 455 gms).

S&F in repairs 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in reapirs 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.

S&F brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F brass chromium plated tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15mm complete all as directed

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20mm complete all as directed

S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

S&F 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete as specified and directed.

S&F in repair vitreous China urinals, half stall (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and Union for discharge pipe incl CP 40mm waste coupling and PVC 40mm waste pipe 900mm long .

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).

S&F in repairs pillar tap, 15mm bore cast copper alloy, fancy type, chromium plated, with capstan heads, screwed down high pressure complete all as specified and directed.

S&F pillar tap, 15mm bore cast copper alloy, fancy type, chromium plated, with capstan heads, screwed down high pressure complete all as specified and directed.

M&L 16-18mm thick granite (of any type) work for wall lining/urinal partition etc, (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 10mm thick rendering in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, compltee all as specified.

S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed.

S&F PVC (SWR) bends 110mm dia any radius.

S&F PVC (SWR) bends 75mm dia any radius.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 110mm dia.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 75mm dia.

S&F PVC(SWR) reducers 110mm to 75mm dia.

S&F PVC(SWR) Vent cowl 75mm dia.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls.

Supply 32mm dia high density polyethylene (HDPE) pipes of pressure rating 6Kg/Sqcm laid in floor or fixed to walls including taking down old pipes all as specified and as directed.

Supply 40mm dia high density polyethylene (HDPE) pipes pressure rating 6Kg/Sqcm laid in floor or fixed to walls including taking down old pipes all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius.

S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia.

S&F PVC (SWR) junction single(Single T) equal or unequal 110mm dia.

S&F 110mm PVC (SWR) WC connector bent type all as specified and as directed.

M&L applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed.

M&L one coat of synthetic enamel paint on Old Painted wood or wooden based surface exc 10cm width or girth including preparation all as specified and directed.

M&L preparing new plastered surfaces of walls and applying and applying three coats of white wash, complete all as specified and directed.

M&L prepararing surfaces plastered or unplastered new surfaces of ceilings and applying three coats of white wash complete all as specified & directed.

M&L prepararing surfaces plastered or unplastered old surfaces of ceilings and applying one coat of white wash complete all as specified & directed.

M&L complete removal of existing treatment of any description & applying two coats of oil bound distemper over 2mm thick wall care putty on undecorated old surfaces of walls complete all as specified and directed.

M&L preparing new plastered/grit wash surfaces of walls and applying two coats of cement paint over a coat of water primer complete as specified and directed.

M&L preparation of old surfaces by washing rubbing down and stopping of plastered surfaces and applying two coats of Cement based paint white or tined on walls including cornices etc complete all as specified and directed.

M&L taking down and removal of loose/ditegrated old concreteplaster and applying 3mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e Nitobond SBR 45) in proportion 1(Nitobond SBR 45) : 1(Water) : 3 (OPC) by volume with the brushes etc to bind New cement plaster/polymer Modified Plaster/concrete/Screed concrete with old surface etc complete.

M&L applying 15mm thick plaster with polymer modified mortrar fortified with SBR (Nitobond SBR 45) in porpotion 1:3 by weight 5 Litres Nit bond SBR 45 to added to 50 Kg cement with 13 Litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and like complete

M&L rendering 20mm thick polymer cement mortar 1:3 prepared with latex SBR by the weight of cement concrete surface incl. Finishing the surface even and smooth without using extra cement. Make Liquid of M/S choksey / STP/Sika/Pidilite as approved by GE. Note :- Exact qty and application process of chemical is strictly as per manufature's guidelines.

M&L waterproofing treatment by the ater proofing liquid of Tech force 2K strong of choksey od equivalent of Dr Fixit/Fosroc fter proper cleaning f the new surface free of dust and applying the first coat (By brush nly) @4-4.5 Sqm/Lit, allowing it to dry for 24 hrs and applying the second coat over it on horizontal and vertical surface all as specified and directed. Note:- Application shall be carried out through authorised applicator of manufactureer only and as per guidlines of manufacturere strictly. Each stage shall be passed by the Engr-In-Charge/GE before laying further coat. Note:-Sunshield 100 of M/S Choksey or fosroc/ST/Pidilite/Sika as approved by GE

S&F harrison rail/curtain rod of metalic 20 mm dia with chromium plated including bracket both side fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil. Complete all as specified and directed.

Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 M in depth for foundation and getting out in soft/loose soil all as specified and directed.

Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed. Note :- Soil obtained from excavation under item 2.00 here-in-before shall be used for filling.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and directed.

M&L hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L PCC 1:3:6 type C2 (40mm graded agg) as in foundation, filling & Mass concrete complete all as specified and directed.

M&L form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batten rough finish flat surfaces on concrete complete all as specified and directed.

M&L form work to sides and soffit of floor or floor beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs etc also splays between floors and bemss etc rough finish flat surfaces on concrete complete all as specified and directed.

M&L form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal, rough finished surfaces of concrete complete all as specified and directed.

M&L M-25 RCC using 20mm graded stone aggregate in foundation including footing, plinth beam, base for column, etc complete all as specified and directed.

M&L M-25 RCC using 20mm graded stone aggregate in for beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified and directed.

M&L M-25 RCC using 20mm graded stone aggregate in for columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L M-25 RCC using 20mm graded stone aggregate in for slabs sopported on walls, beams and columns in floors, roofs etc complete all as specified and directed.

M&L providing precast cement concrete Type B0 1:2:4 (using 12.5mm graded aggregate) as in louvres and jallies 50mm thick including all mouldings set in cement mortar 1:6 complete all as specified and directed.

M&L rendering 10mm thick internal other than fair faces surfaces in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement all as specified and as directed.

M&L screed bed 15 mm thick in cement mortar 1:4 mixed with water proofing admixture as per manufacture instructions on concrete surfaces of roof slab finishing the surfaces even and smooth complete all as specified . (WPA shall be measured and paid separately).

Supply only Liquid water proofing admixture.

M&L PCC (1:4:8) type D2 (using 40mm graded aggregate) 100mm thick as in sub base of flooring finished surface even and rough complete all as specified and directed.

M&L cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 3mm thick weighing not less than 3.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process. It shall be laid by torch application having side over lap 75 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application. For parapet, membrane shall be taken to a height of minimum 60 cm and inserted inside the parapet in a groove to a depth of 65 mm. The same shall be finished by a membrane flashing. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.

S&F 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete.

S&F 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete.

M&L PCC Type D2 1:4:8 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B1 (20mm graded aggregate) cement concrete in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed.

M&L precast cement concrete type B1 1:2:4 (using 20mm graded aggregate) as in drain covers set in CM 1:6 complete all as specified and directed.

M&L concrete bed type D2 PCC 1:4:8(using 40mm graded aggregate) to drain pipes 150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid & tested dia complete all as specified and directed.

M&L 150 mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed

Taking down carefully copper/aluminium point wiring for one light /socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.

M&L point wiring for one light point controlled by one, one way switch with multistrand 1.5 Sqmm unsheathed copper conductor PVC insulated FRLS cable including continuous earth wire 1.5 Sqmm in green colour unsheathed copper conductor PVC insulated FRLS cable connected to common earth dolly in concealed PVC conduit 25 mm with accessories by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS in on New wooden boards fixed on wall for mounting switch, socket, regulators etc with and including 3mm thick phenolic laminated sheet top cover complete all as specified.

All as per serial item No 136.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.

All as per serial item No 136.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No 136.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No 136.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.

S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.

S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed.

S&F LED bulb 10/11 watt complete all as specified and directed.

S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 4 way, 240 volts complete all as specified and directed.

S&F MCB 32/40 Amps, single pole & neutral, 240 Volts, 'C' curve, 10KA, ISI marked as per IS/IEC 60898-1 2002, Ingerted label holder, sliding bottom clamp improved air channels, colorb coded On/Off indication on dolly IP 20 protected terminals, DC-80V per Pole-1KA complete all as specified and directed.

S&F MCB 6-40 Amps, single pole, 240 Volts, 'C' curve, 10KA, ISI marked as per IS/IEC 60898-1 2002, Ingerted label holder, sliding bottom clamp improved air channels, colorb coded On/Off indication on dolly IP 20 protected terminals, DC-80V per Pole-1KA complete all as specified and directed.

S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos), complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm deep as in soft/loose soil copletete all as specified.

Removing excavated material n exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.

M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note : For the purpose of payment only punned thickness shall be measured.

S&F sub main wiring on including passing throuh PVC conduit pipe 1100 volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 Sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing unserviceable sub main wiring. (Note : Two runs of cable with one run of earth wire and one run of PVC casing caping should measured as one length).

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.

Hitesh Construction