SPL REPAIRS OF BLDG NO NP34 SINGLE JCOS ACCN WITH ALLIED INFRA OF 1 FOD UNDER GE SOUTH UDHAMPUR

Surface excavation not exc 30 cm deep and averaging 15cm and getting in any type of soil complete all as specified and directed.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and directed.

Removing excavated material (soils) not exceeding 50 m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling wall /ceiling board ( fibre, pulp,insulation etc ) or insulation board / slab/ blankets any thickness including frame and cover fillets complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specifed and directed.

Dismantling cast iron pipe/PVC & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided complete all as specified and directed.

Demolition of brick/stone masonry built in CM. complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor for sub base complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick Plain cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed.

M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (20mm graded aggregate) as in surface channels and drains including necessary formwork etc all as specified and directed.

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed

M/L for PCC 1:5:10 TYPE E-2 as in Sunken floor /foundation filling and mass Conc complete all as specified and directed.

M&L Providing Cement concrete 1 : 2 : 4 Type B1 (20mm graded aggregate) as in roof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S& F coloured machine vibro mechenically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with,topping of cement mixed with imported pigment,colour and shape shall be approved by engr-in-charge.

M&L for glazed coloured ceramic tiles in dado/vertical surface (450mm x300mm x 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

S&F vitrified dark shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36Sqm,as in floor etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

M & L (1:1.5:3) type A1 (nominal mix using 20 mm grade stone aggregate as in Beams,cantilevers, bressummers, lintel over 1.5 span etc complete all as specified and directed.

M&L for machine cut kota stone joint free 18-20 mm thick in riser/tread of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

M&L Granite ( of any type ) work 20mm thick (table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade.(shade and type as approved by Engr -in -charge)

All as per item No 34 above but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

S&F Moulding of kota / granite full round complete all as specified and directed.

M&L for Rendering 15mm thick (in two layer 10+5)on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for applying three coat of white wash on newly plaster surface of wall over incl preparation of surfaces complete all as specified and directed.

M&L for preparing plastered new and undecorated surface of walls, applying chalk whiting on plastered surface preparatory to distempering and distempering walls with two coats of cement base paint white or tinted complete all as specified and directed

M & L for preparation of old plastered surfaces of wall and distempering with one coat of cement base paint white or tinted complete all as specified and directed.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately)

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

S&F AC designer composite ceiling board 4 to 6mm thick in 600x600mm panel confirming to IS-14682 TYPE-B category-3 including GI frame, holdfast and suspenders complete all as specified and as directed by Engr-in-charge

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.60mm thick crimpted/tapard at the external end slop of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins,crane gantries, rails and fastening and heavy bracket framing (beam, tee,angle,channel or flat section) including distance pieces.

S&F steel window (box type) factory made with side hung glazed shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. including one shop coat of red oxide primer complete all specified. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per Srl Item No.46 here in before but without glazing bar complete all as specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

S&F welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,etc and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed.

Cutting holes exceeding 150 sq.cm but nexc 400 sq.cm in to brick walls built in CM and making good in cement concrete 1:2:4 type B1 for fixing of cooler Brackets etc all as specified and as directed

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F 4 mm thick figured glass (frosted) ,pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete all as specified and directed.

S&F 150 mm Stainless steel anodised, barrel tower bolts of extruded section complete all as specified and directed. (ISI Mark)

S&F 100 mm Stainless steel handles, cast ype anodised complete all as specified and directed. (ISI Mark)

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 250 mm Stainless steel alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. (ISI Mark)

M&L 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on Both Faces complete all as specified and as directed.

S&F Stainless steel cold rolled butt hinges medium weight 75 mm long complete all as specified and directed.

Material and labour for 10 mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L Hardcore of gauge not exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M/L for PCC 1:5:10 TYPE E-2 as in Sunken floor /foundation filling and mass Conc complete all as specified and directed.

Material and labour for 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F PVC 75mm dia pipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints Fixed to wall complete all as specified and directed.

S&F in repairs flush pipe of polyethylene of low or high density, 32 mm dia for low level cistern including taking down old pipe, complete all as specified and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS c

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

S&F PVC bends minimum pressure rating 6 kg per sqcm any radius, rubber ring joints complete all as specified and as directed.

S&F fancy type chromium plated stop valve cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm with long shank and cup (concealed type).

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and directed.

M&L for 75 mm dia PVC floor trap minimum pressure rating 6 kg per sqcm minimum pressure rating 6 kg per sqcm plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20mm bore brass valve high pressure with polyethene float and fly nuts complete screwed for iron pipe or brass ferrule.

hromium plated) (rate also include for taking off unhygienic of WC). Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera/Parryware

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed

S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted with white colour and fixed in position all as specified in SSR Part I make Sintex, Rotex

S&F SS grating 100mm dia fixed to floor trap in repair complete all as specified and directed.

S&F CP concealed stop cock of cast copper alloy(ISI Marked ) chromium plated fancy type scrwed down high pressure with capstain head screwed both end for iron pipe 15mm bore incl add if fixed in repairs for iron pipe complete all as specified and directed.

S&F in repairs for Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and directed.

S&F in repair PVC connection 15mm bore with ptmt nuts of length 600mm complete all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed.

S&F PVC Reducer 100mm minimum pressure rating 6 kg per sqcm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

S& F 110 mm bore PVC bends minimum pressure rating 6 kg per sqcm and fixed with joint sealent etc complete all specified and as directed

S&F 110mm PVC pipes single/Double socketed of any length with rubber ring joints pressure rating 6 kg/cm2 fixed to wall incl clamp etc complete all as specifiedand as directed.

S&F PVC 110mm dia pipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed.

S&F PVC 75mm dia pipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC 110mm dia pipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints Fixed to wall complete all as specified and directed.

All as per Srl item No 142 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly.Make: Havells/ Finolex/ Polycab.

S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheet and edge will be painted to match with prelam sheet. reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and as directed.

S&F factory made solid panel PVC moulded door shutter 28 to 30mm thick style ,with 2,4 or 6 raised panel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm Prelam PVC sheet on back face all as specified and as directed.

S&F for 110mm PVC Junction double, minimum pressure rating 6 kg per sqcm (Double T) equal or unequal complete all as specified and directed.

M & L galvanised 15 mm dia steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed.

S&F for 75mm PVC Junction double, minimum pressure rating 6 kg per sqcm(Double T) equal or unequal complete all as specified and directed.

S&F 75 mm PVC vent cowls minimum pressure rating 6 kg per sqcm complete all as specified and as directed.

S&F stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe complete all as specified and as directed.

M & L galvanised 20 mm dia steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete

all as directed.

S&F Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified and directed. (ISI Marks).

Taking down eaves gutters and and rain water pipes (any size or pattern ), including all fittings incl removal of store and sold to contractor through credit complete all as specified and directed.

S&F for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed . Make: Havells/ Finolex/ Polycab.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T/ Schneider

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge.

S&F Sheet metal enclosure double door type for MCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link , fixing DB and making good distributed surfaces to match with existing specification complete all as specified and directed. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F MCB Three Pole & Neutral capacity of 40 to100 amps 415 volts rupturing capacity 16 KA complete all as specified and directed. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F Sheet metal enclosure double door type for DBs 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F Sheet metal enclosure double door type for DBs 04 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F MCB single pole 240 volt any rating from 06 to 32 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cableMake: L&T/ C&S/CG/ Schenider/ Legrand.

S & F MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cableMake: L&T/ C&S/CG/ Schenider/ Legrand.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 06 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 06 Sq mm as earth lead (2x6.00 sq. mm + 1x6.00 sq. mm earth wire ) complete all as specified and as directed (for VTPN DB to SPN DB) Make: Havells/ Finolex/ Polycab.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.

S&F Modular electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed.Make:Legrand/Havell crabtree/L &T/ Schneider

Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with burshless direct current motor (BLDC) all as specified & directed by Engr-in-charge. Make : Bajaj/Khaitan/Atomberg/Orient

Supply & fix exhaust fan,steel body AC single phase 230/240 volts heavy duty of size 300mm sweep with blades, frame, louvers and all fixing arrangements as all as specified & directed by Engr-in-charge.Make : Bajaj/Khaitan/Atomberg/Orient/Havells

S&F electric water heater, storage type with steel inner tank and heating element upto 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate , NRV, connection piece etc complete all as specified and directed by Engr-in-Charge Make: Bajaj/Havells/Crompton/A O Smith

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize.MAKE : Philips/Syska/Havells/Bajaj

Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.MAKE : Philips/Syska/Havells/Bajaj

Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.