Aluminum work for making almirah and other allied works in newly constructed Directorate of Sports and physical education at new campus

Amount

Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators,Almirahs and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For frames and shutter of door windows, ventilators & Almirah including providing and fixing hinges / pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/neoprene gasket, 5mm glass panes / 12mm thick particle board laminated on both sides for shutters including the cost of magnetic catchers,locks of superior quality, slider channel to slide the glass shutters & backing with 4 mm thick commercial ply including applying a coat of priming coat with wood primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac). The Spacing of Vertical members not to exceed 4’-0” & section to be used is 104 mm x 44.45 mm

Providing and Fixing 12mm thick. toughned glass for shelves including necessary supporting accessories as required at site.The rate to include labour & all material complete.

Brick work with 2nd Class bricks of class designation 75 in foundation and plinth and in superstructure in Cement mortar 1 :6 ( 1 cement : 6 coarse sand). All work upto floor V level.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand). All work upto floor V level.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. All work upto floor V level.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. All work upto floor V level.

Brothers & Co

M/S RAJ KUMAR CONTRACTOR