NIT No GE/ND-73/2024-25

Amount

B&R PORTION: Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down 20 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing from site complete all as specified and directed.

S&F 15 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete towall and ceiling or laid in floor complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:6) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick putty complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying 1.50 mm (average thickness) wall care putty on walls to bring the surface even smooth complete all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F in repair 15mm bore dia Blush Gold PVD anglular stop cock (Code : OPP-BGP-15053PM) with wall flange quarter turn full Antique including cover plate complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No OPP-BGP-15053PM or equivalent of make as specified in PS.

S&F in repair 15mm bore dia 2 way bib cock with wall flange with colour Blush Gold PVD including cover plate complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No KUP-BGP-35041PM or equivalent of make as specified in PS.

S&F in repair 15mm bore dia Single lever tall boy with 155 mm extension body fixed spout with popup waste system with 600 mm long braided hoses round spout incl all required accessories amd fixture complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No KUP-BGP-35005BPM or equivalent of make as specified in PS.

S&F in repair 32mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Blush Gold PVD incl required concealed pipe upto trap with required accessories complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No ALD-BGP-769L300X190 or equivalent of make as specified in PS.

S&F in repair 15mm bore dia Exposed part kit concealed stop cock & flush cock (Jaguar Cat Part No KUP-BGP-35083KPM or equivalent of make as specified in PS) with fitting sleeve, Operating lever & Adjustable wall flange with seal, with colour Blush Gold PVD incl regular body of concealed stop cock (Jaguar Cat Part No ALD-CHR-083 or equivalent of make as specified in PS) suitable for 15 mm pipe line with protection cap complete all as specified and directed by Engr-in-Charge.

S&F in repair Antique Copper Robe Hook complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AQN-ACR-7791 or equivalent of make as specified in PS.

S&F Hand Shower (Health Faucet) with 8 mm dia, 1 meter long flexible tube & wall hook with Blush Gold PVD with check nut and washers complete all as specified and directed. Make: Jaquar Cat Part No ALD-BGP-573PD or equivalent of make as specified in PS.

S&F Toilet roll holder with stainless steel flap with Blush Gold PVD paper holder complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No AKP-BGP-35753PS or equivalent of make as specified in PS.

S&F in repair Towel rack 600 mm long with Lower Hangers, Stainless Steel of Colour : Antique Copper complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No AKP-ACR-35781PS or equivalent of make as specified in PS.

S & F in repair Vitreous China wash down water closet pan 1st quality (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 litre capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm PVC Flush pipe of Low level cistern complete all as specified and directed.

S&F in repairs round shape inset counter sunk wash hand basin Star white of dia 38 cm fixing in 18 mm thick granite (colour as approved) machine cut as in platforms, incl cutting/hole of required shape and size in RCC slab and granite with required mason work and white cement with admixture of of pigment to match the shade of granite stone including required angles, 32mm bore dia CP waste coupling and all reuired fittings complete in all respect complete all as specified and directed.

S&F in repair Soap Dish Holder with Colour : Blush Gold PVD complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-BGP-35731PPD or equivalent of make as specified in PS.

S & F in repair PVC connections 15mm size with PTMT steel nuts of length 450 mm complete all as specified and directed.

S&F in repair Aquamax Exposed part kit of Thermostatic shower mixer with 3-way diverter (Code: KUP-BGP-35683PM) with Colour : Blush Gold PVD, incl Kubix prime bath Spout with wall flange (Code : SPG-BGP-35429PM), with Maze overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Sttainless steel ) with rubit Cleaning Syatem (Code: OHS-BGP-1639PD) of colour : Blush Gold PVD, incl Maze Metal hand shower 90x90mm Square Shape single flow with rubit cleaning (Code: HSH-BGP-1655PD), Over head Shower arm 600x25x25 mm Square Shape for wall mounted Showers with Flange (Code : SHA-BGP-455L600) Flexible tube for hand shower 8 mm dia & 1.5 M long with nuts (Code: SHA-BGP-549D8), wall outlet with shower hook in square shape (Code: SHA-BGP-566SPD) incl cover plate, adjusting leg, concealed diverter and all required accessories/fixture complete in all respect complete all as specified and directed by Engr in Charge. Make : Jaquar Cat Parts Nos as mentioned above or equivalent of make as specified in PS.

S & F in repairs Glass Shelf assembly Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs corner shelf 304 x 304 mm size with 5mm thick toughened glass complete all as specified and directed.

S&F in repairs Drappery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including provision of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 2.50m long) complete all as specified and directed.

S&F in repair Urinal (Back inlet) with fixing accessories, (Code : URS-WHT-13253N) Size : 385x325x635 mm in white Colour with Sensor mini concealed type flushing valve for urinal complete set with installation box (Battery Operated) (Code : SNR-STR-51083) complete including providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl S&F of Battery operated urinal sensor flushing and incl required accessories for making connection with urinal, brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. Make: Jaquar Cat Part No URS-WHT-13253N, Cat Part No SNR-STR-51083 or equivalent of make as specified in PS.

S & F in repairs 12 mm thick Toughened glass edges moulded fixed/inserted to wall upto 75mm depth alongwith stainless steel clamps suitable for bottom support for hanging the partion of toughened glass and making good joints with silicon complete all as specified and directed.

S&F 18 mm thick MDF board pre laminated both side (of approved colour) fixed with screws as in storage cabinet/Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 600 Kg /cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary Aluminium hardware fitting i.e Piano hinge ,handle, ball catchers including mortice locking arrangement, hole cap including lipping etc, and siliding rail in each Cup board incl dismantling of existing cupboard complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid joint less coloured ceramic tiles 7-8mm thick (Square / Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 (colour of tiles should be match will existing tiles) complete all as specified and directed by Engr in charge.

M&L for vitrified ceramic light shade tiles10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

All as per item No 42.00 above but in skirting including backing layer of 10mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including backing layer 10 mm thick in CM 1:3 on wall (colour of tiles should be match will existing tiles) (Colour and pattern approved by EIC) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble stone including grinding, and polishing complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick (approved colour) machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, and polishing complete all as specified and directed.

M&L for 20 mm thick granite (of any type) (approved colour) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding, polishing laid over and including 15 mm thick backing layer in CM 1:4 complete all as specified and directed.

M&L for Providing edge moulding to 18 - 20 mm thick stone of any description of counters vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in sub bsae floor complete all as specified and directed.

M & L for machine pressed precast concrete inter locking pavers block of any shape, colour and pattern (as aprroved by engr in charge) conforming to IS-15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment laid over 40mm thick sand cushioning (Sand shall be measured supply only) complete all as specified and directed

Supply only sand for laying of pavers complete all as specified and directed.

M&L for Providing and fixing at site Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Jali fixing into "U" shape Stainless steel Channel, cut on CNC machine of approved design & measured size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt full body threaded star headed counter sunk SS Screws all as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Make : Rajshri (Stainless steel items to be measured and paid seperately under relevant items) or equivalent of make as specified in PS.

Material & Labour for providing and fixing stainles steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and make good of dismantled portion after fixing of SS "U" shape channel complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation of post holes (or similar holes) in Soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good final finished surface complete all as specified and directed.

M&L for Cement concrete type B2 1:2:4 (40 mm graded aggregates) in foundations, filling and mass-concrete incl required Form work complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, colour as approved by engr in charge complete all as specified and directed.

S&F Steel work in tubular trusses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed.

S&F glazed and gauzed three track aluminium powder coated sliding window of any size made out of Jindal extruded aluminum window classic 18mm series as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly prrofing and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter : top and side with section-20606 , interlocking with section-20605 and bottom with section-20604, including make good of dismantled portion complete all as specified and directed.

S&F Aluminium Powder coated ventilator made of aluminium section weighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 5 mm frosted glass aluminium snap beading screws,hinges including fittings such as peg stays 150mm long (2 Nos) to each leaf, hinges 100mm long (3 Nos), handle (1 no.) with openable shutter with suitable locking arrangement complete all as specified and directed. Note : There will be two shutter in the ventilator, one will be wiremess shutter and other will be frosted glass openable shutter

Supply and Fixed Aluminium powder coated decorative grill with 6.3mm thick aluminum section and 100X100mm openings , weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work alround the grill and fixed with steel screws complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off the shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sqm including shutter and after replacing chowkats the old shutter shall be refixed in same opening complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sqm but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sq. m each complete all as specified and directed.

S&F Solid PVC Single Door Frame of size 50mm x 95 mm made out of 5 mm prelam PVC sheet reinforced with MS sqare tube used as per specifications and drawings single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet including fasteners and makeing good the damage portion complete all as specified and directed.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm thick pre laminated PVC sheet on back face to be fixed on frame at site as per specification & drawing complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.

S and F factory made 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed..

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F Butt hinges in 100 mm Size, medium weight, cold rolled mild steel, and fixed complete all as specified and directed..

Supply and fixed Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F stainless steel auto closer hinges of size 100 mm with SS screw for door complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for two coat of synthetic enamelled paint over a coat of primer in any approved pattern and colour including preparation of New surfaces of wood exceeding 10cm width or grith not other wise provided complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm PVC (SWR) bends any radius complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site (Welded mesh & addl reinforcement if required measured and paid separetly) complete all as specified and directed. Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to G+3 storey building.

M & L hard drawn steel wire fabric cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire S & F in reinforcement weight not exceeding 4.00 Kg/Sqm complete all as specified and directed

M & L for uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed.

S & F PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fasterner 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE.

Demolition cement concrete (reinforced) in ground floors and upto 4 storey of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for reinforced cement concrete type B-1 1:2:4 using 20 mm graded aggregates (Nominal Mix) as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like. complete all as specified and directed.

Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for rough finished surfaces complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

All as per item No 95.00 above but 6 to 8 mm dia complete all as specified and directed.

Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removal from site complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed.

S & F in repair ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed.

S&F in repair 20 mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete all as specified and directed.

S&F in repairs CP grating 125 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of approved colour, size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri / Fenesta / Ecocell

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws incl all hardware fitment of brass approved colour and design by Engineer- In- Charge complete all as specified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Make : Rajshri / Fenesta / Ecocell

S&F mineral fibre ceiling boards 16mm thick 600 x 600 mm size including grid 25x25x1.6mm thick GI powder coated angles 25 x35x1.6mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 99, Aerolite) complete all as specified and directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, incl all required hardware fitments complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, incl all required hardware fitments complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Make : Rajshri / Fenesta / Ecocell Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Stainless steel fastener of size 150 to 200mm for fixing WPC door frame and like in position complete all as specified and ditected.

S & F uPVC ventilator with exhaust fan, for ventilation in toilet with openable type window of frosted glass with uPVC frame of approved colour, thickness 60 mm, Length 750mm and height 600 mm complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint using roller brush (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of Exterior Emulsion paint (APEX ULTIMA) using roller brush over one coat of primer and over incl one coat of Birla putty complete all as specified and directed.

S&F Stairs (framed) Fe-410 -W(Gde E-250) quality-B including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet (colour as approved by Engr-In-Charge) instead of Plain colour PVC sheet inclusive of PVC frame work, solvent cement, screws, fasteners and all required accessories and fixing the sheet at site on PVC frame as per specifications and drawing including complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with CP grating 100 mm dia round including jointing with solvent cement fixed with cement mortar including necessary cutting etc complete all as specified and directed.

S&F 18 mm thick MDF board pre laminated both side (of approved colour) fixed with screws as in storage cabinet/Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 600 Kg /cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary Aluminium hardware fitting i.e Piano hinge ,handle, ball catchers including mortice locking arrangement, hole cap including lipping etc, and siliding rail in each Cup board complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing complete all as specified and directed.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M & L for Glazed vitrified coloured tiles of 10 mm thick in glossy finish of size 2 x 4 feet (60 x 120 mm) fixed in vertical surface with 10 mm thick backing layer of good quality tile adhesive (MYK Laticrete 325+ / Roff) (qty of water should be mix as per manufacturere's instruction) fix to wall incl cleaning work (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour) complete all as specified and directed.

M&L for Cement concrete 150 mm thick type D-2, 1:4:8 (using 40mm graded stone aggregate) in concrete sub base / floors pavings etc finished even & smooth with out using extra cement complete all as specified and directed.

M&L for RCC design mix M-25 (20 mm graded aggregates) for Beams, Cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Form work for flat rough finished surfaces of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to chullah hoods, cha-jjas, troughs and similar items including edges for rough finished surfaces complete all as specified and directed.

S&F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised but length of bolt exc 30 cm long as required and dia of neck is 20 mm incl removing all treatment upto original roof making drill / hole in RCC column / roof to fix the screw/bolt with a suitable adhesive complete all as specified and directed.

S&F Plates chequered (Fe-410 -W(Gde E-250) quality-B) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including all required assesseries complete all as specified and directed.

S&F 20 mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F Vitreous China Counter top basin of size: 615x415x150 mm code : DRS-WHT-37601 in white colour with Click clack waste 32 mm size full thread with 130 mm height Colour Blush Gold PVD (Code: ALD-BGP-727L130) modern design with rectangular shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete in all respect complete all as specified and directed. Make: Jaquar Cat Part No DRS-WHT-37601 or equivalent of make as specified in PS.

S&F SLS-WHT-6953BIUFSM in white colour Rimless, Blind Installation Wall Hung WC with UF soft close cover, Hinges and accessories set, Size : 375x520x400 mm, incl single piece slim concealed cistern body in white finish code: JCS-WHT-2400 with installation kit with flush control plate kubix code: JCP-BGP-352415 of colour Blush Gold PVD incl required accessories and fixture, making all connection to make it functional incl make good complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

S&F Urinal (Back inlet) with fixing accessories, Size : 385x325x635 mm in white Colour with Sensor mini concealed type flushing valve for urinal complete set with installation box (Battery Operated) (Code : SNR-STR-51083) complete including providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl S&F of Battery operated urinal sensor flushing and incl required accessories for making connection with urinal, brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. Make : Jaquar Cat Part No URS-WHT-13253N, Cat Part NoSNR-STR-51083 or equivalent of make as specified in PS.

S&F 15mm bore dia Blush Gold PVD anglular stop cock with wall flange quarter turn full Antique including cover plate complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No OPP-BGP-15053PM or equivalent of make as specified in PS.

S&F 15mm bore dia 2 way bib cock with wall flange with colour Blush Gold PVD including cover plate complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No KUP-BGP-35041PM or equivalent of make as specified in PS.

S&F 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Blush Gold PVD code: KUP-BGP-35233NKPM with concealed body for single lever basin mixer wall mounted code : ALD-CHR-233N incl all required accessories/ fixture to make operation complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

S&F Antique Copper Robe Hook complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AQN-ACR-7791 or equivalent of make as specified in PS.

S&F Towel rack 600 mm long with Lower Hangers, Stainless Steel of Colour : Antique Copper complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-ACR-35781PS or equivalent of make as specified in PS.

S&F Towel Towel ring Square of Colour : Blush Gold PVD complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-BGP-35721P or equivalent of make as specified in PS.

S&F Soap Dispenser with glass bottle with Antique Copper colour complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-ACR-35735P or equivalent of make as specified in PS.

S&F Soap Dish Holder with Colour : Blush Gold PVD complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-BGP-35731PPD or equivalent of make as specified in PS.

S & F PVC connections 15mm size with PTMT steel nuts of length 450 mm complete all as specified and directed.

S&F 32mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Blush Gold PVD incl required concealed pipe upto trap with required accessories complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No ALD-BGP-769L300X190 or equivalent of make as specified in PS.

S&F 15mm bore dia Exposed part kit concealed stop cock & flush cock (Code : KUP-BGP-35083KPM) with fitting sleeve, Operating lever & Adjustable wall flange with seal, with colour Blush Gold PVD incl regular body of concealed stop cock (Code : ALD-CHR-083) suitable for 15 mm pipe line with protection cap complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

S&F 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete all as specified and directed.

Supply and fixed Double Coat Hook with Colour : Blush Gold PVD complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-BGP-35761P or equivalent of make as specified in PS.

S&F Drappery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including provision of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 2.50m long) complete all as specified and directed.

S&F Aquamax Exposed part kit of Thermostatic shower mixer with 3-way diverter (Code: KUP-BGP-35683PM with Colour : Blush Gold PVD, incl Kubix prime bath Spout with wall flange (Code : SPG-BGP-35429PM), with Aquamax concealed body of thermostatic shower mixer with 3 way diverter (Code : ALD-CHR-683), Maze overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Sttainless steel ) with rubit Cleaning Syatem (Code: OHS-BGP-1639PD) of colour : Blush Gold PVD, incl Maze Metal hand shower 90x90mm Square Shape single flow with rubit cleaning (Code: HSH-BGP-1655PD), Over head Shower arm 600x25x25 mm Square Shape for wall mounted Showers with Flange (Code : SHA-BGP-455L600) Flexible tube for hand shower 8 mm dia & 1.5 M long with nuts (Code: SHA-BGP-549D8), wall outlet with shower hook in square shape (Code: SHA-BGP-566SPD) incl cover plate, adjusting leg, concealed diverter and all required accessories/fixture complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of approved colour, size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri / Fenesta / Ecocell

Providing and fixing at site Factory Made 24 mm thick 100% Solid WPC (Wood polymer Composite ) Plain Jali cut on CNC machine of approved design & measured size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Make :Make : Rajshri / Fenesta / Ecocell

E&M PORTION: M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 6 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 149.00 above but One three pin socket outlet 6 amps point controlled by one no, one way switch on independent board complete all as specified and directed.

All as per item No 149.00 above but One three pin 6 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.

All as per item No 149.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

S&F modular switch 230/250 volts grade one way SP 6 Amp rating complete all as specified and directed.

S&F modular switch 230/250 volts grade one way SP 16 Amp rating complete all as specified and directed.

S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 pin 6 Amp combined 2 module type complete all as specified and directed.

S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 pin 16 Amp combined 2 module type complete all as specified and directed.

S&F of modular Fan regulator 240 volts complete all as specified and directed.

S&F ceiling rose 3 terminal / PVC / Polycarbonate, insulated body complete all as specified and directed.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 6 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

S&F factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

S&F factory made sheet steel distribution boards, double door, SPN 08 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

Supply and fixing of MCB, 240V 10KA, B curve single pole 06 to 32 Amps complete with connection testing complete all as specified and directed.

Supply and fixing of MCB, 240V 10KA, B curve single pole 40 Amps complete with connection testing complete all as specified and directed.

Supply and fixing of MCB, 240V 10KA, B curve single pole and neutral 32 Amps complete with connection testing complete all as specified and directed.

M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25x4 mm up to 7.50 RM bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board / test point (including test point) at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh etc including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified and directed.

S&F LED Tube Lightfitting of 20 Watt 230Volt(size 4 ft) complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells cat No LHEXARP7SN1W020 or equivalent of make as specified in PS.

S&F LED Tube Light fitting of 10 Watt 230Volt (size 2 ft) complete with LED Tube Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells cat No LHEXACP5IN1W010 or equivalent of make as specified in PS.

S&F aesthetically designed muziris decorative warm white LED pictur light of 07 W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 07 W having LED Lamp base complete all as specified and directed. Make: Philips Cat Part No 31402 or equivalent of make as specified in PS.

Supply and fixing LED luminaire panel light 2 X 2, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Bajaj cat no BPRF 36W WH SL LED or equivalent of make as specified in PS.

S&F LED Building security light fitting 25 watt including GI bracket of suitable size,fixing with clamp ,nut,bolt and other connected accessories complete all as specified and as directed.

S&F LED Bulkhead fitting of 10 Watt 230 Volt , complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified & directed. Make : Bajaj Cat No BIBWP 10W LED or equivalent of make as specified in PS.

Supply & fixing of remote controlled BLDC Ceiling fan complete with blades,down rods and all connected accessories operating at 230 V with 1200 mm sweep. Minimum air delivery should be 210 CFM,rated 5 star with brushless direct curent (BLDC) motor,color as per site requirement. Making arrangement for hanging fans to ceiling with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-In-Charge.

S&F plastic body fresh air fan size 230 mm sweep with new plastic body fresh air/exhaust fan fan 230mm AC single phase 230 V 50 HZ with blades, frame, louvers and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt complete all as specified and directed.

S&F factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified and directed.

S&F MCCB 3 pole 100 Amp, 415 Volts ,36kA fixed type including thimbles, nuts, bolts ,washers etc. and connections complete all as specified and directed.

M/S SONU ENTERPRISES (BID ID -3143496)

sony engineering works (BID ID -3144398)