Segga Providing independent canal based water works, Providing Functional House Hold Tap Connection and laying of balance pipe line in village Segga Tehsil Distt. Kaithal (under Jal Jeevan Mission)

Amount

Supply & erection of Horizontal spindle split casing type puming sets minimum Four (4) Star rating duties directly coupled to AC squrrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No.II with priming arrangement with complete base frame as per IS marked complete in all respect (A) RAW Water Pump Set 800 LPM with 12 MTRS HEAD

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500 x 1200mm and 400mm deep having following accessories complete in all respects as per approved NIT. (a) Incomer Switch 200 Amp.. (b) Aluminum bus bar chamber of 300 Amp. Capacity (c) Volt meter 100x100 ranged 0 to 500 V (AE/Kappa/ L&T). (d) Indicating Lamp-One Set

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200/900mmx400mm deep having following items A) For Raw water pump set for 800 LPM x 12 Mtr. head = 2 Nos at W/W (a) Main Switch 63 Amp. 2 Nos. (L&T Siemens, ABB). (b) Volt Meter 100 x 100 mm range 0 to 500 volt 1 No. (AE/KAPPA/ L&T) (c) Amp. Meter 100 x 100 mm range 0 to 100 Amp. 2 Nos.(AE/KAPPA/ L&T). (d) (CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS 1 No. & ASS 2 No. each approved make (f) SPP 1 No. of approved Make (g) Motor starter, star delta 2 Nos. for 800 LPM x 12 M Head Motor (L&T Simens, AAB) (h) Capacitor of suitable capacity = 2 No. (i) Indicating Lamp-One Set (j) Change over switch 63 Amp. = 1 No. each

For Clear water pump set for 800 LPM x 40 Mtr. head = 2 Nos at W/W (a) Main Switch 63 Amp. 2 Nos. (L&T Siemens, ABB). (b) Volt Meter 100 x 100 mm range 0 to 500 volt 1 No. (AE/KAPPA/ L&T) (c) Amp. Meter 100 x 100 mm range 0 to 100 Amp. 2 Nos.(AE/KAPPA/ L&T). (d) (CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS 1 No. & ASS 2 No. each approved make (f) SPP 1 No. of approved Make (g) Motor starter, star delta 2 Nos. for 800 LPM x 40 M Head Motor (L&T Simens, AAB) (h) Capacitor of suitable capacity = 2 No. (i) Indicating Lamp-One Set (j) Change over switch 63 Amp. = 1 No. each

Supply, erection, testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch, button, plug,, PVC conduct pipe and Copper wire etc. as per approved specifications complete in all respect

Supply, erection, testing of reputed make LED light 100 watts with fitting and accessories complete in all respects

Operation and Maintenance for the complete scope of work mentioned in the DNIT (Disinfection material supplied by the PHED) as per schedule-IV for a period of 5 years after 12 months during defect liability period and 3 months trial run period. (will be charged to the A/mtc. estimate) complete in all respects i) Operation and Maintenance during defect liability period after 3 months trial run period (Operation only)

ii) For 1st year Operation and Maintenace after defect liability period

iii) For 2nd year Operation and Maintenace

iv) For 3rd year Operation and Maintenace

v) For 4th year Operation and Maintenace

vi) For 5th year Operation and Maintenace

Bidder Name

Amount

Satin Goel(GSTN-06AJIPG3072B1ZQ)