PROVN OF DRAINAGE AND SEWAGE FACILITY ALONGWITH CERTAIN REVENUE WORKS AT LGJ MIL STN

Amount

B/R Portion Excavation in trenches n.exc. 1.5 mtr wide, n exc 1.5 m in depth and n.exc. 10 Sqm on plan & getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge

Material and labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in foundation, filling & mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for brickwork with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in cm 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for damp proof course 20 mm thick in CM 1:2 to horizontal or vertical surfaces including necessary formwork acomplete all as specified and directed by Engineer-in-Charge.

Material and labour for reinforced cement concrete, type B1, 1:2:4 using 20 mm graded stone aggregates in lintels upto 1.5 mtr span, cills steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, incl formworks complete all as specified and directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid seperately.

Supply and fixing for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

,---ditto--- All as per serial item No 06 above, here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm as specified in soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc. 1.50 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand filling / sand cushioning in floors or in foundations or for cable protection including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Material and labour for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface in broken stone or boulders (15 cm compacted thickness) complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub-base complete all as specified and directed by Engineer-in-Charge.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/rectengular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge.

M&L for joint free glazed ceramic coloured tiles of size 350 X 250 X 7 mm / 450 x 350 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engr-in-charge.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering, 10 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 on wall finished even and fair with WPC complete all as specified and directed by Engineer-in-Charge. Note : WPC Shall be measured and paid separately as supply only.

Material and labour for preparing newly / old plastered or pointed surface of ceiling or wall by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge

Material and labour for preparation of new/old plastered or pointed surface of walls/pillars/cornices by sand papering or by any other mean and after preparing the surfaces applying two coats of cement base paint complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and labour for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F arm strong mineral fibre accoustical suspended ceiling system with ANF (Micro look) EGE tiles with arm strong silhouette exposed grid. The tiles should have humidity resistance (RH) of 90% NRC 0.5% Light reflectance shall be more than 85% thermal conductivity K=0.052 - 0.057 W/mk. Colour shall lbe white, fire performance class 0/class 1 (BS 476) in module size of 600mm x 600mm x 15mm with bioblock coating on the face of tiles. Suitable for green building application with recycle content of 63%. The tiles shall be laid on arm strong silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white / black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68 kg/Sqm. Silhouette, main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction. The Tee section have a galvanised of 125 gms/Sqm complete all as specified and directed by Engr-in-Charge.

S&F standard aluminium anodised grill size of mesh 75X75x10mm using U chanell 25x12mm complete all as specified and directed by Engineer-in-Charge.

S&F aluminium frame & shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including powder coating of any colour (Thickness or powder coating not less than 50 micron). etc. complete in all respect all as specified & directed by Engr-in-Charge.

S&F Neoprene / EPDM rubber gasket all as specified and directed by Engineer-in-Charge. Note : Taken for other other than door/window shutter if reqd

M&L 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long butt hinges mild steel medium weight cold rolled including necessary welding etc. to steel frame complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long aluminium anodised handle, cast type complete all as specified and directed by Engineer-in-Charge.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L Soakage wells exc, in any type of soil, Foundation in PCC 1:3:6, wall of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber made of Brick work in CM, RCC cover slab in M-25/SFRC cover/ RR masonry / Filling with brick bats, interconnecting pipe of RCC /DWC complete of size 3.6 M dia X 6.0M deep complete all as specified and directed by Engineer-in-Charge. Drg No. : ST/BPL/06 of sheet No. 1/1 dated 14/10/2005 (Details of soak well)

M&L for PCC 1:2:4 type B2 using 40mm graded aggregates as in benching / haunchig of manholes including forming channels including necessary formwork etc complete all as specified and directed by Engineer-in-Charge.

M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set in cement mortar 1:6 as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces complete all as specified and directed by Engineer-in-Charge.

M&L for moorum bed to drain pipes, spread, levelled and rammed including watering complete all as specified and directed by Engineer-in-Charge.

Supply and laying DWCPE (SN8) 180 (OD)/163 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on moorum bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge. Make : Alom poly Extrusions Ltd (Alcorr)

Cutting into existing manholes for connection of new drain making pipes and rendering cutting out existing benching & forming branch channel in PCC 1:2:4 type B1 smooth finished & forming benches as reqd etc for 150 mm bore complete all as specified and as directed by Engineer-in-Charge

Taking down chowkhats or frames exc 1.5 Sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge .

Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge .

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete and new work built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

S&F mortice lock, vertical type, size 100mm brass 4 levers complete all as specified and directed by Engineer-in-Charge. Make : As approved by Engr-in-charge.

M&Ldouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivote made of brass, other parts made of mild steel heavy duty and dixed in floor complete all as specified and directed by Engr-in-Charge. Make : EVEREST, UNIVERSAL, GODREJ

S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S&F Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description from brick walls or concrete surfaces of walls and ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

S&Fdecorative / External grade wall cladding n exc 0.25 sqm, fixed with approved adhesive including making V groove at top and bottom over and including 10 mm thick backing coat in cement mortar 1:4 with silicon treatment complete all as specified and directed by Engineer-in-Charge. Note : The pattern (design & colour) and samples are got approved before execution of the work

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 40 mm thick Cement Concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in sub-base/levelling course complete all as specified and directed by Engineer-in-Charge.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) nonskid mat finish polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) mat fiinished/light shed polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge.

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones size 300mm x 300mm x 100mm with plain fair faces, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade over 50mm thick Fazilka sand cushion complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and two coats of oil bound distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Providing CASEMENT UPVC WINDOW/vent fabricated by approved manufacturer in diferent size of wall thickness 1.2mm + .25 made out of extruded section plain UPVC sections, The window/vent frame made out of Rigid UPVC sections meter cut at 4 Corners & joint with plastic fution welding with internal reinforce require. The Shutter section made out of extruded Rigid UPVC with internal reinforced with provision of 5 MM glaze wire mesh aas per requirement. The Window shall be fixed to the wall using 65 x 100 MM long MS fasterners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturere's specification and direction of Engineer-in-Charge. Make : H2O solution, Madhu Industries banglore, Fenesta

M&L Block board, 19/20mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on both face, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 & n.exc 6 Sq.cm of 2nd class hard wood complete all as specified and directed by Engineer-in-Charge.

S&F continous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm ) complete all as specified and directed by Engineer-in-Charge.

S&F magnetic catcher fixed with nut, screw and washer complete all as specified and as directed by Engineer-in- charge.

S&F 40 mm dia, cupboard/drawers knobs with nut, screw and washer of brass, polished complete all as specified and as directed by Engineer-in- charge

Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge. Make : Rajshree doors

Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled doorshutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge. Make : Rajshree Doors

S&F night latch size 100mm brass 4 levers complete all as specified and as directed by Engineer-in- charge

Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe complete all as specified and as directed by Engineer-in- charge

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and as directed by Engineer-in- charge

S&F in repair vitrieous china wash down WC (Pedestal pattern) white and flush piple including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete all as specified and as directed by Engineer-in- charge.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, seat and cover for water closet (European type) complete all as specified and as directed by Engineer-in- charge.

S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and as directed by Engineer-in- charge.

S&F in repair vitreous china wash hand basin coloured Flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap complete all as specified and as directed by Engineer-in- charge

S&F in repair bib tap, fancy type, cast copper alloy, chromium plated, with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed suitable for 15mm bore iron pipe complete all as specified and as directed by Engineer-in- charge Note :- The minimum weight of tap shall be as given in SSR or in relevant IS. (Model No : APR-ESS-101037, Make-JAQUAR.

S&F in repair of Center hole wash hand basin mixer With 450mm long braided hoses system, brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for wash hand basin, screwed down for iron pipe 15mm bore including taking down old valve any type complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of valve shall be as given in SSR or in relevant IS. Model No:ASPIRE/ SINGLE LEVER-APR-ESS-101011B, Make-JAQUAR

S&F in repair 2-way angle cock double handle with flages fancy type, cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS. (Model No : Cat No - 7411, Make-Prayag / Jaquar ).

S&F in repair angle valve/stop cock/stop valve fancy type, cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS. (Model No : APR - ESS - 101053 Make-JAQUAR .

S&F in repair brass chromium plated overhead shower 70mm dia round shape single flow ( ABS Body chrome plated with gray face plate ) with rubit cleaning system with 240mm arm & flange including fixing to 15mm bore pipe complete all as specified and as directed by Engineer-in-charge. (Make JAQUAR ) (Shower Model No : ALLIED Cat No - EOS - 491) Make-JAQUAR, Arm Model No- ALE-536 A)

S&F in repair of wall mixer with "L" bend 115mm long full system brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for bathing, screwed down for iron pipe 15mm bore including taking down old valve any type complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of valve shall be as given in SSR or in relevant IS. (Model No : APR-ESS-101273) Make-JAQUAR

S&F in repair chromium plated fancy type health faucet with 1mtr tube & hook complete all as specified and directed by Engineer-in-Charge. Make-Prayag, Model No-DROPLETS -Cat No-BEA-85)

S&F in repair stainless steel chromium plated jet spray (butter fly or " L" bend) suitable for EWC including 1m tube and necessary nut bolts complete all as specified and as directed by Engineer-in-charge. Make-Prayag, Model No-DROPLETS -Cat No-BEA-17 (Butter fly type ) & BEA-18(L- Bend type)

S&F in repair brass chromium plated Liquid soap dispenser including fixing to 15mm bore pipe complete all as specified and as directed by Engineer-in-charge. Make-Prayag, Model No-Chrome plated series -Cat no-493

S&F in repair corner glass shelf 200mm with Abs brackets complete all as specified and directed by Engineer-in-Charge. Make-Prayag, Model No-ABS BRACKETS -Cat No-BEA-48)

S&F in repair brass chromium plated PEG SET 6 including fixing to 15mm bore pipe complete all as specified and as directed by Engineer-in-charge. Make-Prayag, Model No-DROPLETS -Cat no-BEA-30)

S&F in repair chromium plated fancy type soap dish complete all as specified and directed by Engineer-in-Charge. Make-Prayag, Model No-CANTABILE- PICASSO -Cat No-BA-05

S&F in repair stainless steel grating round or square 150mm size (minimum weight 100gms) complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

M & L for PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate) as in coping of including necessary form work finished even and smooth without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channels 30 cm inner girth in Cement concrete using extra cement including forms, moulds mitred/ stopped ends etc. in manholes complete all as specified and directed by Engineer-in-Charge. Note : inner girth only measured.

M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate), in cover slabs of manholes, open drains inclusive of form work set in CM (1:4) complete all as specified and directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid separately.

M&L TMT bars 6 mm to 8 mm dia cut to length, bent to shape required,including cranking, bending spirally etc. and binding with and including MS (annealed )wire not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick on concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement for external surfaces of manholes complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in CM (1:4) on concrete surface, finished even and smooth using extra cement including mixing of water proofing compound @ 3 % by wt of cement or as per manufacturer's instructions (supply only WPC shall be measured & paid shall be measured & paid separately) for internal surfaces of manholes complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:4:8) Type D2 using 40 mm graded stone aggregate bed to drain pipes including packing under and haunching against the side of pipes after they are laid and tested for bore of pipe 150 mm complete all as specified and directed by Engineer-in-Charge.

M & L for RCC pipes class NP2 laid and jointed complete with collar in trenches on concrete bed and making joints and testing as specified in Bore of pipe 150 mmcomplete all as specified and directed by Engineer-in-Charge.

M&L for Hume pipe septic tank Designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below Foundation, vent shaft, connection etc,complete for 10 users complete all as specified and as directed by Engineer-in-charge. Drg No. : TD/STR/10 sheet No. 1/1 dated 02/09/2001 (RCC septic tank horizontal type on centrifugal process for 10 to 50 users

M&L Soakage wells exc, in any type of soil, Foundation in PCC 1:3:6,wall of Honey combed and solid in M-25 Concrete, including intercepting chamber,screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats,complete of size 1.2 M dia X 3.0M deep complete all as specified and as directed by Engineer-in-charge. Drg No. : ST/BPL/06 of sheet No. 1/1 dated 14/10/2005 (Details of soak well)

E/M Portion Supply, laying and testing in replacement of XLPE LT Cable of size 25 Sqmm, 3.5 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge. Note :- (i) Excavation, earth work, sand cushioning, brick protection, cutting of road and pipe shall be measured & paid separately under appropriate item of BOQ) Make : Gloster, Havells, Polycab

S&F MCCB 3 pole 415 volt 63 Amp 16 KA with adjustable thermal and adjustable magnetic release complete all as specified and as directed by Engineer-in-charge. Make : Havells/Indo Asian/Legrand

S&F on load change overswitch 100 Amp four pole complete all as specified and as directed by Engineer-in-charge. Make : Indo Asian (Cat part No : ITAE0100)

Supply and laying locally available Sub class B bricks (oldsize) for cable protection cover, laid flat and lay in trenches over cable complete all as specified and as directed by Engineer in charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

GOYAL ENTERPRISES

Dashmesh Construction Company

J K ENGINEERS

AJAY CONSTRUCTION COMPANY

PAREEK AND COMPANY

SHIVA CONSTRUCTION COMPANY