Karnataka

AOC

Works

Irrigation and Other Works

Rejuvination of Haravibasapura LIS in Hadagali Taluk Vijayanagara District for the year 2025-26

Minor Irrigation Department

Minor Irrigation Division Bellary | Ballari, Karnataka

Amount: ₹31.5 LCloses: 30 Apr 2026Closed

Timeline

Published22 Apr 2026
Closed30 Apr 2026
Awarded9 Sept 2026

Bids

1 Bid9 Sept 2026

#	Company	Amount	Status
1	H ESHANNA ₹33.0 Laccepted-aoc	₹33.0 L	accepted-aoc

Tender Value

₹31.5 L

EMD Value

₹63,000

Closing Date

30 Apr 2026, 5:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Shilpa K

Office Number

Work Description

Rejuvination of Haravibasapura LIS in Hadagali Taluk Vijayanagara District for the year 2025-26

Tender Information

Tender ID

MI/2025-26/IW/WORK_INDENT11538

Reference Number

MI/2025-26/IW/WORK_INDENT11538

Tender Type

Open

Product Category

Irrigation and Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

Minor Irrigation Division Bellary

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredContractor Registration certificate, Class 3 and Above, PWD Registration

RequiredAchieved in at least TWO financial years during the last five years i.e. 2020-21 to 2024-25 a minimum financial turnover in all classes of civil engineering construction works only of Rs. 3145460.05 Financial turn over of previous years will be given a weightage of 10percentage per year to bring to them to the price level of the FY 2025-26.

RequiredSatisfactorily completed at least 90percent of contract value in the last five years i.e.2020-21 to 2024-25 as a prime contractor,at least one Similar work such as Improvements/Rejuvination of LIS works value not less than Rs. 15.73 lakhs. The weightage of 10percent will be given per year to bring them to the price level of the FY 2025-26.

RequiredLiquid assets and or availability of credit facilities of not less than Rs.9.44 Lakhs Credit lines or letter of credit or certificates from banks for meeting the fund requirement etc

RequiredThe bidders are instructed to visit the site before submitting the bid and copy of the site visit certificate has to be obtained by the concerned AEE and the same has to be uploaded in KPPP portal.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Contractor Registration certificate, Class 3 and Above, PWD Registration

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP Portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The tenderer should maintain the scheme during the defective liability period.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall scan & upload all the original documents required for this bid to the KPPP portal. The Original Documents shall be produced at the time of opening of Bid for physical verification.

Unbalanced tenders should include Security amount and unbalanced amount that is difference of amount put to tender and quoted amount.

EPF and ESI Registration Certificate of Contractor should be uploaded upto date.

During the execution of work, if any minor minerals are required contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the Mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral concession rules 1994 (as amended from time to time) will be deducted from contractors bills at the time of payment.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The contractor has to furnish Additional performance security deposit of an amount equal to the difference in the amount put to tender and the tendered amount in addition to security deposit of 5% of contract price.

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use and certificate shall be submitted.

The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached duly attested to e-tender document. The original certificates/document shall be produced on or before stipulated date and time for verification. Scanned signature of bidder/authorized representative of the bidder shall be attached while up loading bid document.

Each item of BOQ to be read as with all lead and lifts and as per the directions of Engineer in charge.

A copy of GST registration certificate to be uploaded.

Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos to be uploaded.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

Incomplete tender documents will be rejected.

Corrigendum will be published in web site for all modifications/corrections if any.

The contractor /firm shall send the authorization letter for the representatives duly attesting their signature.

The intending bidder are advised to visit the site of work before submission of the tenders.

If any of the Contractor who have been black listed as per Government order are not eligible to participate in this tender.

As per the Karnataka building and other construction workers welfare cess act 1996 1 % of the bill amount will be deducted from the bill.

The tender Processing charges paid by the bidder are not refundable even if the tender are cancelled.

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Further information can be had from the office of the Executive Engineer, Minor Irrigation & Ground Water Development Division, Ballari during the office Hours.

The work done certificate shall be issued not below the rank of Executive Engineer.

The contractor shall quote the rates without adding GST either materials or works contract (Service). GST payable by the Contractor under this works Contract will be paid to the Contractor separately over and above the Contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority.

Annual turnover certificate along with Balance sheet certified / attested by Chartered Accountants should be uploaded with 18-Digitis system generated unique number (UDIN Number)

The amount put to tender is Exclusive of GST. Hence GST will be paid separately.

The department and contractor are bounded for Excess payment/recovery in case of revision in GST Rates.

The bidders are instructed to visit the site before submitting the bid and copy of the site visit certificate has to be obtained by the concerned AEE and the same has to be uploaded in KPPP portal.

Fallow the conditions as per attached Government Order MID/434/MISU/2025 dt:22.08.2025

AMOUNT SHOULD NOT EXCEED THE APPROVED ESTIMATED COST

The contractor quoting 20% below or beyond 20%below has to submit the rate analysis for quoted rates.

Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5.0- B) Where, A Maximum value of civil engineering works executed in any one year during the last five years i.e. 2020-21 to 2024-25 (updated to 2025-26 price level) taking into account the completed as well as works in progress. N, Number of years (03 months)prescribed for completion of the works for which tenders are invited. B, Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 09 months (09/12-0.75) year i.e. period of completion of the works for which Tenders are invited.

All relevant documents as per KW-2 need to be uploaded while submitting bid in general documents provision in KPPP portal.

Fee & Financial Details

Tender Fee Amount

₹790

EMD Fee Amount

₹63,000

Important Dates

Last Activity

9 Sept 2026

Published

22 Apr 2026

Download Ends

29 Apr 2026

BOQ Preview

•

Rejuvination of Haravibasapura LIS in Hadagali Taluk Vijayanagara District for the year 2025-26

•

Cutting and burning or disposing off Apu / Jondu from marshy areasas directed with all other ancillary operations etc.., complete with all lead and lifts including loading and unloading and as per spe...

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations etc.., complet...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includi...

•

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches,foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...

•

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with a...

•

Cleaning concrete / masonry / rock surface for guniting / shotcreting by sand blasting method and cleaning by air and water jets after sand blasting as per specifications including cost of all materia...

•

Providing and laying 80 mm thick in-situ M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for canal lining deploying batching plant, transit mixer and vibratory cyl...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...

•

Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specifie...

•

Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...

•

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

•

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

•

Painting with aluminium paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. etc.., complete with all...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, rmouring strip thickness and resistivity as per IS-3975 150 Sqmm,...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations etc.., complete with all lead a...

•

Winding of 60 Hp DWT 3 phase induction motor Kirloskar /jothi / Croption greaves make motor with ‘B’ Class insulating material such as triple papers , emperor cloth, cotton tape, varnish (Oil) air...

•

Supplying starter spares for 125 amps Air Break ATS starter Replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp amps meter and volt meter, turnel plate, push botton, MCB, ...

•

Supplying of Spare parts to 60 H P oil lubricated DWT pump to facilitate from site to workshop by removing motor turbine base, tee joint, column pipes, line shafts and bowl assembly etc., complete, Su...

•

Supplying and spare materials suitable providing of L&T make OCB base plate with studs etc., Complete providing & fixingcontacts for OCB and providing of moving coppercontacts or providing of novelts ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-2 Haravi Basapura 11538.doc

Tender Document • 24.12 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

H ESHANNA

₹33.0 Laccepted-aoc