Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC C O M KHARKARANG LUMJINGSUK BLOCK A MADANRTING SHILLONG 793021 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793021 | L1 | Accepted-AOC AOC GIVEN TO M/S BHUIYA CONSTRUCTION BEING LOWEST BIDDER | |
| 2 | L2₹29.7 L+₹3.0 L (11.4%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹29.8 L+₹3.2 L (12.0%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
8 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE SILCHAR, PO-ARUNACHAL, DIST-CACHAR, ASSAM-788025
REPAIRS AND MAINTENANCE OF EXTERNAL WATER SUPPLY AT CIJW SCHOOL VAIRENGTE UNDER GE SILCHAR
2024_MES_636904_1
8853/E8
Open Tender
Civil Works
Item Rate
180 days
VAIRENGTE
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE SILCHAR
₹50,000
29 Mar 2024
11 Jan 2024
10 Feb 2024
11 Jan 2024
8 Feb 2024
26 Jan 2024
18 Jan 2024 - 23 Jan 2024
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed
Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed
Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed
Taking up or down steel water tubing and connections from any location / position including sorting out and stacking serviceable tubings for reuse and disposing off unserviceable tubings, etc. complete all as specified and as directed for the following bores of pipes:
Relaying / refixing only steel water tubing, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS-1239 and fixed to walls or laid in trenches required for water connections complete all as specified and as directed for the following bores: Notes: (a) Serviceable tubings obtained from dismantling herein before will be reused under this item (b) Tubings shall be thoroughly cleaned off from dirt, mud, silt, rust, etc., duly de-scaled and threaded before reuse
Supplying, fixing / laying steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings viz. bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange, etc. ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches for water connections including all necessary welding, etc. as required at site complete all as specified and as directed for the following bores:
M&L for cutting into existing GI water pipes in position and any location for insertion of tees, tail piece, collars, branch pipes, reducers, etc. at any required length or for additions / alterations, complete all as specified and as directed for the following sizes of pipes: Notes: (a) Excavation and earthwork will be measured and paid separately under respective items herein (b) Both sides cut shall be measured as one unit
M&L for GI/MS flange 6mm thick suitable GI pipes and welding to existing GI pipelines at site, with all necessary allied works including taking out and disposing off old unserviceable flanges complete all as specified and as directed for the following bores of pipes:
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, heavy duty, including necessary cutting into existing pipe, threading, inserting new piece of GI pipe of existing size, and earthwork in any type of soil or breaking/cutting into road/interlocking tiles/cement concrete, etc. and making good the disturbed surfaces including taking out and disposing off old unserviceable valves complete all as specified and as directed of the following sizes:
20mm dia
25mm dia
50mm dia
80mm dia
Supplying, fixing and testing on installation sluice valve, cast iron body class PN 1.6, conforming to IS-14846, ISI marked, both ends flanged with brass spindle and brass check nuts with cast iron hand wheel including jointing material like rubber insulation sheet 3mm thick, bolts, nuts and fixed to pipe line including taking out and disposing off old unserviceable valves complete all as specified and as directed of the following sizes:
80mm dia
100mm dia
150mm dia
S&F suitable brass spindle with brass check nuts including taking out and disposing off old unserviceable spindles and testing vlaves for functionality complete all as specified and as directed for the following sizes of valves:
80mm dia
100mm dia
150mm dia
S&F in repairs ball PTMT valves, high pressure, with polythene float and flynut, screwed suitable for GI pipe or brass ferrule and fixed complete all as specified and as directed of the following sizes:
20mm dia
25mm dia
S&F cast iron foot valves, conforming to IS-4038, ISI marked including taking out and disposing off old unserviceable valves complete all as specified and as directed of the following sizes:
80mm dia
100mm dia
S&F cast iron non-return valves, both sides flanged and drilled with holes for bolts and nuts, etc. including flanged joints with rubber gasket, bolts, nuts and washer, etc. by cutting the existing pipe where required, welding of flanges including taking out and disposing off old unserviceable valves complete all as specified and as directed of the following sizes:
100mm dia
150mm dia
S&F cast iron air release valves with two air outlets of 50mm bore and fixing up in cast iron water supply mains, one end flanged and drilled with holes for bolts and nuts, etc. with flanged joints with rubber gaskets, bolts, nuts and washer, etc. including taking out and disposing off old unserviceable valves complete all as specified and directed of the following sizes:
100mm dia
150mm dia
S&F 100mm dia stainless steel butterfly valves (wafer type) PN 1.6 with stainless steel disc, lever operated, with nitrile / EPDM lining suitable for inlet/outlet GI pipe of filtration plant including taking out and disposing off old unserviceable valves complete all as specified and directed
M&L for running welding to steel where required of MS tank for arresting leakages, etc. at a height of 3 to 11m including all staging, etc. cleaning and cutting the rusted portion as required, thickness of plates not exceeding 6mm thick complete all as specified and as directed
M&L for cutting of rusted MS sheet, cross arm, angle iron frame or tubular structure of pre-pressed steel OH tank at height of 3 to 11m and replacing with new MS sheet (not exceeding 6mm thick), cross arm, angle iron frame or tubular structure and welding the same at required locations, making leakproof the joints, etc. including all necessary staging, etc. as required complete all as specified and as directed
M&L for preparation of surfaces by scrapping of old paint, smoothening of surfaces and painting with two coats of synthetic enamel paint (of approved tint) on outer sides of MS steel sheets of barge at Rukni river and OH tank of any capacity including all necessary staging, etc. as required complete all as specified and as directed
M&L for preparation of surfaces by scrapping of old paint, smoothening of surfaces and painting with one coat of synthetic enamel paint (of approved tint) on iron cover of valve pit chambers and GI pipelines at various pump houses complete all as specified and as directed
M&L for repairing water level indicator of various capacities of PS tank by replacing the float PVC/MS, standard cable, roller bearing, painting the indicated marks and indicator in reservoirs at 3 to 9m heights including all necessary staging, etc. as required complete all as specified and as directed
S&F water level indicator at locations including all necessary staging, etc. as required and taking down old userviceable indicators and disposing off complete all as specified and as directed with the following materials and details: (a) Angle iron ISA 4040, 3mm thick - 7Rm (b) MS plate 3mm thick 10cm wide - 3m (c) Nylon rope 5mm dia with MS pully - 15m (d) PVC float ball 150mm dia - 1No. (e) PCC 1:3:6 using 20mm grade aggregate-0.5cum (f) Painting with two coats of black paint over a coat of red oxide primer and marking the water level as per the UG sump capacity (g) Arrow shaped weight marker for water level indicator fabricated from 100x10mm thick MS flat of length 100mm duly painted with two coats of white sythetic enamel paint over a coat od red oxide primer
S&F rubber armoured hose pipe heavy duty of 100mm dia both ends flanged with suitable nuts, bolts, washers, etc. fixed in position complete all as specified and as directed
M&L for cleaning of internal surfaces of pressed steel overhead water storage tanks at 3 to 9m heights, including staging (as required), at any position / location, by scrubing the surfaces with the help of coir brush, jute cloth and flushing out all the accumulated mud / silt inside the tank, then applying two coats of lime wash on all internal surfaces like wall, ceiling, floor, etc. and writing tank number, capacity of tank, date of cleaning with white synthetic enamel paint over a black synthetic enemal paint base (of suitable dimensions) with size of letter 4" height complete all as specified and as directed of the following capacities:
1,00,000 litres
27,000 litres
20,000 litres
10,000 litres
M&L for cleaning of internal surfaces of underground water sumps at any location, by scrubing the surfaces with the help of coir brush, jute cloth and flushing out all the accumulated mud / silt inside the tank, then applying two coats of lime wash on all internal surfaces like wall, ceiling, floor, etc. and writing tank number, capacity of tank, date of cleaning with white synthetic enamel paint over a black synthetic enemal paint base (of suitable dimensions) with size of letter 4" height complete all as specified and as directed of the following capacities:
2,00,000 litres
1,00,000 litres
50,000 litres
25,000 litres
S&F valve pit/chamber cover fabricated out of 3mm thick MS sheet, higed or welded with frame of MS flat and angle iron of size 50x50x5mm in shapes required at site, with suitable locking arrangements, painting with two coats of black synthetic enamel paint over a coat of red oxide primer duly grouted in position in PCC 1:2:4 type B1 (using 20mm graded stone aggregates) complete all as specified and as directed of the following sizes:
M&L for construction of brick masonry valve pit chamber with 100mm thick foundation using PCC 1:3:6 (type C-2) using 40mm graded stone aggregates, 230mm thick brick masonry wall built in CM 1:6, 10mm thick internal and 15mm thick external plastering in CM 1:4, finished even and smooth without using extra cement and 6mm thick MS sheet cover including 50x50x6mm MS angle frame fixed in PCC 1:2:4 type B-1 coping with 25x6mm flat iron hinges, hold fasts, handles, locking arrangements, applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer to all steel surfaces including excavation and earthwork in any type of soil and disposal of surplus soil to a distance of not exceeding 50m and demolition of old chamber, including foundation, etc. and disposing off complete all as specified and as directed of the following sizes: Note: The cost shall be inclusive of all items of work required for the execution and entire completion of this item and nothing extra shall be paid separately in any other items of BOQ
M&L for plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in foundations, mass concrete, etc. complete all as specified and as directed
M&L for brickwork with sub-class 'B' bricks (old size bricks), straight or curved on plan exceeding 6m mean radius built in CM (1:4) complete all as specified and as directed
M&L rendering 15mm thick in cement mortar (1:4) on fair surfaces of PCC block / brick masonry wall / concrete surfaces, etc. finished even and smooth without using extra cement complete all as specified and as directed
M&L preparation of newly plastered / unplastered surfaces and applying three coats of white wash on walls, etc. complete all as specified and as directed
M/S SKYSCRAPER CONSTRUCTION
MS AFTAB LASKAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .