SPECIAL REPAIR TO BLDG NO. T-08 AND T-51 (OTM ACCN) AND ADDN/ ALTN REHABILITATION TO BLDG NO. P-73, P-74, P-75 AND P-100 (OR MD ACCN) AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc complete all as specified and as directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in existing PVC concealed conduit with all accessories ie PVC gutties etc terminated including sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ complete all as specified and as directed. in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iii) Cutting chasing whereever required including conduit pipe and making good the disturbed surface shall be part of job at no extra cost

All as per item No 3 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 3 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed.

All as per serial item No 3 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed.

M&L for Modular Socket 6A/16A - 2/3 pin combined 2 module type complete all as specified and as directed.

M&L for Modular Socket, 6A - 2/3 pin combined 2 module type complete all as specified and as directed.

M&L for Modular switch 1 way 6A, 1 module type all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type complete all as specified and as directed.

Material and labour for Modular Bell push 6A 1 module complete complete all as specified and as directed.

M & L for Fan step regulator, 120W -AC 230 Volt modular type complete all as specified and as directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 2.5 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 2.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and as directed.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6.0 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 6.0 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and as directed.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s with degree of protection IP 54 suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar complete all as specified and as directed. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fix in replacement of MCB SP up to 6-32 Amp complete all as specified and as directed.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable batten fitting , decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 20W including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and directed.

Supply & fix in replacement of existing unserviceable batten fitting , decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 10W including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and directed.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified and as directed.

S & F LED Lamp Ball Lamp 9 Watt complete all as specified and as directed.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and as directed.

S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt complete all as specified and as directed. .

M&L in replacement of existing unserviceable earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I complete all as specified and as directed.

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways confirming to IP 54 (one incoming three phase & four out goings three phase )for MCCB, comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 10 KA IHLGSF0100 =01 NO as incoming (Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

M7L taking down ceiling fan from site and painting of ceiling fans complete in situ with synthetics enamel paint by scraping including filling cavayties with filter ,two coats after cleaning all dust after oiling and greasing the bearing and serving the complete fan including hanging/refixing the fan with all connecting accessories and making electric connection from ceiling rose etc.complete all as specified and as directed.

Supply,laying and testing cable XLPE insulated ,screened ,PVCX bedded galvanised steel strip or wire armoured electric cable power cable 1100 volts grade with stranded alminium conductor of size 16 sq mm x 4 core complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of Pipes, cables, poles,Stay and strips etc and getting out in Soft/Loose soil cocomplete all as specified and as directed.

Returning, filling-in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level of not exceeding 1.5m above the starting point complete all as specified and as directed.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

M & L for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and as directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Suply and fixing water storage heater of capacity 25 Ltrs ,BEE 5star rated complete all as specified and as directed.

Suply and fixing BLDC ceiling fan of sweep 1200 mm ,BEE 5star rated complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , unframed work in any position complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Demolition of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L 10mm thick cement plastering in cement mortar 1:6 finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for cement plastering 15mm thick in two layers in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces.(note:- (i) taking down plaster and applying of 15mm thick plaster will be measured separately) (note ii :- after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1:3 with mixing of WPC URP 301 complete all as specified and directed.

M&L for applying acrylic thick wall care putty on surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.

Cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, incl use and waste of all necessary form work complete all as specified and as directed.

S&F MS hollow rectangular/square/circular tubes/pipes of Fe 410-W (Gde E-250) Grade as in frame work for roof/ rafter/ purline/ chajja/ trusses/ columns/ struts etc and like similar items etc. complete all as specified and as directed.

M&L For Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet of 0.50mm thickness (TPT) with AZ 150, minimum Tensile Strength 550 MPa, minimum weight 4.05 Kg/sq.m, of colour as approved as in roof covering/wall claddings, fixed with fasteners/self tapping screws as recommended by manufacturer complete all as specified complete all as specified and as directed. Note : 1. Fixing of sheets will be done strictly according as per manufacurer's instructions. 2. The rates for laps shall be deemed to be included in the quoted rate shall not be measured & paid separately.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet of min 0.50mm thickness, Min. Tensile Strength 550 MPa, of colour as approved as in ridge/gutter, fixed with fasteners/self tapping screws as recommended by manufacturer complete all as specified and as directed. Note : 1. Fixing of sheets will be done strictly according as per manufacurer's instructions. 2. The rates for laps shall be deemed to be included in the quoted rate shall not be measured & paid separately.

M&L for preparing steel and iron surfaces of any description including purlins/ rafters/ trusses/ columns/ struts etc and the like works and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for preparation of surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying two coat of cement base paint with highlighter of any approved shade @ 5 sq.m/kg/1 coat over & including a coat of exterior wall cement primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of cement based paint by using following brands of cement based paint and primer by brush or roller complete all as specified & as complete all as specified and as directed.

Taking down chokhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

Taking down chowkhats or frames with shutters of any description (without taking off shutters from the frame) n exc 1.5 sqm each and removing from site complete all as specified and as directed.

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 3mm ACP Sheet below & above middle/lock rail and to be fixed with and including, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete all as specified and as directed. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame incl complete all as specified and directed.

S&F 35mm thick plain framed (Factory made) Panelled shutters of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply including beading on the facing side of shutters as per SSR Part I clause No 8.17.5. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated all as specified.

S&F 35mm Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L for 200mm long stainless steel tower bolts of minimum 10mm dia complete all as specified and as directed.

M&L for 150mm long stainless steel handles complete all as specified and as directed..

M&L for stainless steel sliding door bolt 250mm long complete all as specified and as directed..

MS butt hinges 100mm long stainless steel complete all as specified and as directed.

S & F M/S 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F Stainless steel wire cloth, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified and as directed.

M&L for 50mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints, filled with polyurethane elastic adhesive/sealant (white/grey colour-sikaflex) of approx density 1.30kg/litre and form work complete all as specified and as directed.

S&F Mild steel bolts with dia of neck n. exc. 12mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and as directed.

S & F anodised aluminium snap grid frame work (size of grid 605x605mm) for false ceiling all as specified including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L 12 to 12.50mm thick semi-perforated/pin holed particle board/tiles, 600x600 ± 5 mm in size fixed in false ceiling as per manufacturer's instructions to existing frame work or on snap grid as in repairs complete all as specified and as directed..

M&L for joint free premium quality GVT coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed..

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic glossy finish rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. Note : Dado should be flushed with the wall plastering.

M&L for Anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tilescomplete all as specified and as directed.

Vitreous china wash hand basin white flat back size 450 x 300 mm including PVC waste pipe 32 mm bore and 32mm CP Waste coupling with and incl a pair of suitable mild steel brackets, fixed all in repairs, including cutting for or pinning in and making good disturbed portion as reqd complete all as specified and as directed.

S&F of Vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., with flush pipe PVC 32mm dia and incl. S&F of plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and as directed.

S&F Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down complete all as specified and as directed.

S&F CP jet for EWC with chrome finished connction pipe including all accessories for fixing complete all as specified and as directed.

S&F overhead CP shower 125mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified and directed.

S&F Bib taps,CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect all as specified.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in positioncomplete all as specified and as directed.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect complete all as specified and as directed.

S&F 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete incl taking down & removing old unserviceable PVC connection any size complete all as specified and directed.

S&F CP gratings AISI-304 of size 150X150mm square in shape with 5mm border complete all as specified and as directed.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and as directed.

S&F 20mm (OD 22.20mm) CPVC pipes SDR 11 for potable hot and cold water supplies lead free incl all fitting suitable for fixing 15mm CP fitting & fixtures on walls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified and as directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed..

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank including dismantling of old tanks of any description complete all as specified and as directed.

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank including dismantling of old tanks of any description complete all as specified and as directed.

S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20mm bore iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm bore iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

M&L cast iron multifloor/floor/nahani trap 100 mm dia and 450 to 600 mm long including jointing with solvent cement in repair complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified and directed.

Taking down of existing CI pipe 100 mm bore and refixing the same after cleaning painting with 2 coats in any position complete all as specified and directed.

S&F 100 mm cast iron soil waste and vent pipe in any length with or without ears laid in floor incl dismantling of old pipe and excavation of trenches, refilling and leveling of surface complete all as specified and directed.

Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.

S&F cast iron 4 way junction for 100mm bore with access door as in repair complete all as specified and as directed.

S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and as directed.

S&F CI Bends (any radius), for 100mm bore CI piipes complete all as specified and as directed.

S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

M&L for cast iron cowls of 100 mm dia complete all as specified and directed.

S&F CI gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' fixed in repair complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded agg.) as in sub base under floors complete all as specified and as directed.

M&L for Pre-polished rubber moulded machine pressed precast concrete interlocking paver block (50% red and 50% grey colour for making patterns) of any approved shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment laid over 25mm thick sand cushioning complete all as specified and as directed.

S&F single liver basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe complete all as specified and as directed.

S&F 20mm dia towel rail CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and ccomplete all as specified and as directed.

S&F Curtain rod Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers funnels etc complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and manhole covers, in any position not otherwise described for (such as in bed, haunching & packing of sewer lines, benching of manholes, copings etc.) complete all as specified and as directed.

RCC (1:2:4) type B-1 using 20mm graded mechanically crusted stone aggregate as in precast slabs for covers of manholes and set in CM 1:4 including necessary form work and placing of manholes cover in version complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding witgh and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Taking down of Eaves gutter/rain water pipe( AC rain water pipe /SWG pipe line of any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal from site (measured overall as fixed along the centre line including fitting and accessories) complete all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and as directed.

S&F in repaire 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F in repaire 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid 0.9mm Decorative laminate type 1 of surface finish, colour and pattern as approved , fixed with approved adhesifee as per manufacture's instruction laminated if approved coulure and the other side plain white colour fixed with screw solvent cement /adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinet complete as per manufacturer’s instructions complete all as specified and directed.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and as directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and as directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed

Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 7-8mm thick and area exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in Cement Mortar 1:4 over complete all as specified complete all as specified and as directed.

Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), 7-8mm thick and area exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 10 mm thick screed layer in CM 1:4 overincl taking down existing plaster complete all as specified and as directed.

Taking down shutters exc 1 sqm and n exc 2sqm and refixing in same opening after necessary adjustment complete all as specified and directed.

Buttar Construction Co. (BID ID -3123679)

ANIL KUMAR AND CO (BID ID -3124367)

K B Enterprises (BID ID -3133037)

AR CONSTRUCTIONS (BID ID -3130343)

Arneja Builders (BID ID -3115612)

Jawandha Enterprises (BID ID -3132880)