NIT NO. 98/Durg(Kawardha)/2026

N.I.T. Schedule for A.R.work of N/R Building under P.W.D. Sub Division Kawardha Year 2026-27

P.A.C. Rs. 20.00 Lacs

S. No. Chapter No. Item No. Sub Item No. Discription Quantity Unit Rate Amount AmountInWords

1 16 16.3 16.3.2 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In lime mortar. 20 Cum 187

2 16 16.3 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 30.8 Cum 263

3 16 16.8 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead. 20 Sqm 57

4 16 16.11 16.11 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles including roof timber (excluding trusses), including stacking of serviceable material and disposal of unserviceable material within 50m lead. 17 Sqm 44

5 16 16.12 16.12 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles excluding roof timber, including stacking of serviceable material and disposal of unserviceable material within 50m lead. 25 Sqm 27.5

6 16 16.17 16.17 Dismantling G.I. sheet roofing including ridges hips, valleys and gutters etc. and stacking the material with 50 m lead. 22.5 Sqm 33.5

7 16 16.18 16.18 Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the materials with 50 m lead. 20 Sqm 16.5

8 16 16.2 16.20.1 Dismantling wood work in frame, trusses purlins and rafters etc upto 10 metre span and upto 5 metre height above plinth level including stacking the material within 50 M. lead Of sectional area 40 sq. cm and above 7 Cum 894

9 16 16.2 16.20.2 Dismantling wood work in frame, trusses purlins and rafters etc upto 10 metre span and upto 5 metre height above plinth level including stacking the material within 50 M. Of sectional area below 40 sq. 25.24 Cum 3.6

10 16 16.23 16.23 Dismantling wooden ballies, posts, purlins rafters including stacking within 50 metre lead. 27.55 Meter 6.8

11 16 16.26 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 16 Each 100

12 16 16.27 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 26 Each 66.5

13 16 16.28 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 18 Each 46.5

14 16 16.29 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 28 Each 33.5

15 16 16.31 16.31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 4 Kg 1

16 16 16.36 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 126.45 Sqm 22.5

17 16 16.37 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 368.05 Sqm 11

18 16 16.43 16.43.1 Demolishing cement concrete including disposal of material within 50 metre lead. 1:4:8 or leaner mix 12.8 Cum 329

19 16 16.43 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix 9.8 Cum 549

20 1 0.0 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 65.8 Cum 185

21 1 1.17 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth,sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 34 Cum 65

22 1 1.18 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 74.8 Cum 371

23 3 3.1 3.1.2 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 7.6 Cum 2659

24 3 3.1 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 8.05 Cum 2970

25 3 3.2 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 9.1 Cum 4163

26 3 3.12 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415 560 Kg 54.5

27 2 2.1 2.1.1 Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 167.2 Sqm 139

28 2 2.1 2.1.6 Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at all levels, for: Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes 20.05 Sqm 356

29 2 2.1 2.1.7 Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at all levels, for: Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 80.2 Sqm 235

30 2 2.1 2.1.8 Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at all levels, for: Beams, lintels, cantilevers & walls 72.8 Sqm 202

31 3 3.13 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 5.3 Cum 4237

32 4 0.9 4.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation: i) 1st layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. ii) 2nd layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. iii) 3rdlayer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with coarse sand @ 1.289 kg/sqm and water proofing cement compound @ 0.07 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. iv) 4th and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. 150.2 Sqm 283

33 4 4.13 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 8.25 Cum 3817

34 7 7.2 7.2.2 Brick work with modular well burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 12.05 Cum 3635

35 7 7.4 7.4.1 Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20 kg/sqcm and water absorption not more than 25% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 20.05 Cum 3263

36 7 7.6 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 38.2 Cum 121

37 7 7.7 7.7 Extra for brick work in square and rectangular pillars. (size not more than 600mm in any direction) 2 Cum 185

38 7 7.9 7.9.1 Half brick thick (9cm) brick masonry with modular well burnt clay bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% upto plinth level: Cement Mortar 1:3 (1 cement : 3 coarse sand) 65.05 Sqm 448

39 8 8.1 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 1.48 Cum 61051

40 8 0.9 8.7.2 Providing and fixing 35mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area) Bijasal, benteak, khair, haldu 19.6 Sqm 1605

41 8 0.0 8.8.2 Providing and fixing 30mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area) Bijasal, benteak, khair, haldu 21.8 Sqm 1397

42 8 8.13 8.13.2 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1),interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 25.2 Sqm 1370

43 8 8.15 8.15 Extra for double leaf shutter instead of single leaf. 8.2 Sqm 52

44 8 8.24 8.24.2 Providing and fixing 30mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45mm for doors, windows, clerestory windows excluding hinges. Bijasal, Haldu, Benteak, Khair 20.8 Sqm 1722

45 8 8.52 8.52.2 Providing, and fixing M.S. round and square bars with MS flat of required pattern in wooden frames for windows & clerestory windows including applying a priming coat of red oxide zinc chromate primer, welding etc complete Ornamental grill 180 Kg 76

46 8 8.99 8.99.2 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 250 x 16 mm 26 Each 72.5

47 8 8.1 8.100.2 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 250x20x6mm 26 Each 50.5

48 8 0.000 8.102.3 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 150 mm 54 Each 23

49 8 0.000 8.102.4 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 100 mm 22 Each 16.5

50 8 0.000 8.102.2 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 100 mm 76 Each 29

51 8 0.999 8.120.2 Providing and fixing aluminium sliding door bolts with 16mm rod,necessary nickel plated iron nuts bolts and screws etc complete. 250x16mm 76 Each 141

52 8 0.000 8.121.2 Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete. 250x12mm 46 Each 51.5

53 8 0.999 8.122.3 Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete. 150 x10mm 38 Each 44.5

54 8 0.999 8.122.4 Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete. 100 x10mm 30 Each 31

55 8 0.999 8.123.2 Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete. 125 mm 36 Each 26

56 8 0.999 8.123.3 Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete. 100 mm 28 Each 21.5

57 8 0.999 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 15.24 Meter 346

58 8 0.999 8.152.1 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter 8.4 Sqm 2318

59 9 0.9 9.2 Structural steel work riveted or bolted or welded in built-up sections,trusses and frames work upto a height of 5m above plinth level, including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 19.2 Kg 66

60 9 9.11 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 7.6 Sqm 3330

61 9 9.18 9.18.3 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer. Single rebate/ mullion 100mmx50mm size, 1.25mm thick sheet. 42.4 Meter 391

62 10 10.1 10.1.2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 40.3 Sqm 810

63 10 10.5 10.5.2 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete. 0.80 mm thick sheet with zinc coating not less than 275 gm/sqm 12.8 Sqm 533

64 10 10.17 10.17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 65.1 Sqm 347

65 10 10.22 10.22.2 Providing and fixing ridges and hips in asbestos cement sheet roofing with G.I., J or hooks, bolts and nuts 8 mm dia, G.I plain and bitumen washers complete. Serrated or plain wing adjustable ridges 84.8 Meter 65.5

66 10 10.43 10.43 Providing and laying single wheel tilling without batten. 16.4 Meter 341

67 10 10.44 10.44 Providing and laying single wheel tiling over and including half split (splitted into 2 pieces) bamboo batten 50 to 70 mm at a distance of 200mm both side. 12.6 Sqm 865

68 10 10.46 10.46 Providing and laying Manglore pattern tiles 20 mm thick (without hip or ridge tiles) on steel/ wooden frame (frame work to be paid separately) 8.8 Sqm 592

69 10 10.47 10.47 Providing and laying Manglore pattern hips and ridge tiles fixed in cement mortar 1:6 etc. complete 16 Meter 130

70 11 11.1 11.1.1 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:3 (1 cement : 3 fine sand) 340.4 Sqm 93

71 11 11.2 11.2.3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 460.4 Sqm 96.5

72 11 11.3 11.3.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 330.8 Sqm 113

73 11 11.5 11.5 Neat Cement punning. 175.6 Sqm 33

74 12 12.3 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 167 Sqm 254

75 12 12.7 12.7.1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 67.7 Sqm 587

76 12 12.7 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size above 200x300mm 65.4 Sqm 646

77 12 12.9 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm 72.9 Sqm 692

78 12 12.37 12.37.1 Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade using white cement 54.9 Sqm 640

79 12 12.49 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) 67.5 Sqm 897

80 12 12.5 12.5 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) 28.4 Sqm 990

81 12 12.56 12.56 25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone i/c grinding, rubbing and polishing. 97.6 Sqm 516

82 14 14.61 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 140.4 Sqm 57

83 14 14.62 14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 124.8 Sqm 64

84 14 14.71 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 22.6 Sqm 133

85 17 17.12 17.12.1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 55.8 Sqm 524

86 17 17.13 17.13.1 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4 mm 52.5 Sqm 669

87 17 17.14 17.14.1 Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm 62.5 Sqm 548

88 17 17.16 17.16 Renewal of old putty of glass panes (length) 255.6 Meter 13.5

89 17 17.17 17.17 Refixing old glass panes with putty and nails 152.5 Sqm 175

90 18 0.0 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ),100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm 13 Each 2899

91 18 18.2 18.2.3 Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: White Orissa pattern W.C. pan of size 580x440 mm 15 Each 1440

92 18 18.3 18.3.2 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x125x25 mm 16 Pair 259

93 18 0.9 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 11 Each 2882

94 18 0.0 18.6.1 Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan including cutting and making good the walls and floors wherever required White pedestal type 9 Each 1180

95 18 18.7 18.7.1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 12 Each 729

96 18 18.13 18.13.1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 10 Each 1776

97 18 18.13 18.13.2 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back type urinal of size 460x380x250mm 12 Each 1529

98 18 18.17 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 15 Each 1430

99 18 18.17 18.17.2 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x400 mm 12 Each 1408

100 18 18.18 18.18.1 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x450 mm 17.5 Each 936

101 18 18.18 18.18.2 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x400 mm 10 Each 915

102 18 18.32 18.32.1 Providing and fixing sand cast iron S&S pipe as per IS: 1729 for soil, waste and vent pipes: 100 mm dia. 13 Meter 783

103 18 18.36 18.36.1 Providing and fixing sand cast iron S&S heel rest sanitary bend as per IS : 1729: 100 mm dia 4 Each 290

104 19 19.7 19.7.1 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 15 mm dia. nominal bore 70.2 Meter 149

105 19 19.7 19.7.3 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 25 mm dia. nominal bore 80.1 Meter 258

106 19 19.13 19.13.2 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (350 grams) 47.5 Each 237

107 19 19.13 19.13.3 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Stop cock (350 grams) 37.5 Each 237

108 19 19.51 19.51 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 7.5 Each 4356

109 20 0.0 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 160.4 Meter 162

110 20 20.2 20.2.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 100 mm diameter S.W. pipe 75.8 Meter 357

111 20 20.31 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 6 Each 1709

112 18 18.76 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 130 Meter 182

113 18 18.76 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 110 mm dia pipe. 190 Meter 267

114 18 18.77 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 52.5 Each 113

115 18 18.77 18.77.1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 54 Each 154

Note :- All Building S.O.R. Item Rate Should be Applicable as per requirement