Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹37.9 L+₹4.9 L (14.7%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹38.5 L+₹5.4 L (16.4%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹39.8 L+₹6.7 L (20.3%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹39.9 L+₹6.8 L (20.4%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹41.6 L
EMD Value
₹83,300
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
SPECIAL REPAIR OF BLDG NO T-85-86 (A) COOK HOUSE AND T-75-76 (A) DINNING HALL UNDER GE (EAST) MATHURA
2022_MES_551505_1
8200-1297/E8
Open Tender
Civil Works
Item Rate
180 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE EAST MATHURA
₹83,300
21 Oct 2022
12 Sept 2022
13 Oct 2022
12 Sept 2022
10 Oct 2022
27 Sept 2022
12 Sept 2022 - 3 Oct 2022
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings including ridges, hips, valleys etc complete all as specified and as directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screw complete all as specified and as directed.
Dismantling timber scantlings (framed work) 40 sqcm and over in section, in any position complete all as specified and as directed.
S&F mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.
S&F mild steel flat iron wind ties for roof including all necessary drilling, bolting or riveting etc complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping etc. complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets complete all as specified and as directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as specified and as directed.
M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.
Demolition of brick work built in cement mortar including all quoins arches, pillar etc complete all as specified and as directed.
M&L brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for reinforced cement concrete 1:1 1/2:3 type A1 (using 20 mm graded crushed stone aggregate) as in slab supported on walls, shelves and the like complete all as specified and as directed.
Form work to soffits of suspended slabs such as roof slabs, floor slab, landing and similar work flat not exceeding 200 mm thick (Horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.
Formwork to edges of concrete flat, floor and roof sides of RCC/PCC band in wall horizontal or slooping, and similar works exc 5cm but n exc 10cm wide for rough finished surface of concrete complete all as specified and as directed.
M&L for mild steel TMT bars 8 mm dia and over, cut to lenth, bent to shape required including cranking, bending, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or secring with clips completd all as specified and as directed.
Taking down cement plaster of any description from brick wall or concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.
M&L for rendering 10mm thick on fair faces of Brick work or concrete surface in cement mortar 1:4 finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC as per manufacturers instructions finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be mesured & paid saparatly under relavent item of this BOQ.
M&L preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directeed.
M&L preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
Dismantling, stone slabs of any description or thickness in floors/laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps jambs, window cills, cooking platform and like laid over and including 15mm thick sceed bed in cement mortar 1:4 and pointing in white cement (1:2) using marbal dust with admixture of pigment to match the shade of granite including rounded/ half rounded edge and making hole for gas pipe in pre-cast slab complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, sub floor and paving etc complete all as specified and as directed.
M & L for 50mm thick cement mortar 1:3:6 type C-1 (using 20mm graded stone aggragate) as in plinth protection surface finished even and fair without using extra cement complete all as specified and as directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
All as per items serial No 28 here-in-before but tiles of size 450x300x7mm/300X200x7mm thick on vertical surfaces laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M&L 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.
Taking down chowkhats or frame with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and as directed.
Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.
M&L for Pressed steel frames of size125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. supplied and fixed complete all as specified and as directed.
M&L cement concrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of back of prestressed chowkhats etc. complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint on primed steel surface of any description not otherwise described over 10 cm width or girth complete all as specified and as directed.
S & F 35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and as directed.
S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed
S&F 15 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.
S&F 20 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.
S&F 150mm long aluminium handles fabricated type anodised complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.
S&F stop valves/Angle cock cast copper alloy chromium pated fency type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore dia iron pipe or for unions and fixed complete all as specified and as directed.
S&F bib taps cast copper alloy chromium plated fency type with crutch or butterfly handle, screwed down screwed for 15mm bore dia iron pipe complete all as specified and as directed.
S&F in repairs brass chromium plated towel rail 20 mm dia, D type 600 mm long between the flanges complete all as specified and directed.
S&F in repair PVC (SWR) floor trap plain dia of outlet 75mm with stainless steel grating including jointing with solvent cement complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern springs complete all as specified and as directed.
S&F in repair stainless steel kitchen plate rack of size 31" x 30" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and as directed.
S&F in repair single lever sink mixer with swinging spout on upper side wall mounted model with connecting legs and wall flanges fixed to 15mm bore dia iron pipe complete all as specified and as directed.
S&F sinks with drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-22mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.
S&F PVC (SWR) 110mm bore bends any radius all as specified and as directed.
S&F PVC (SWR) 110mm bore junction single, (Single T) with access door all as specified and as directed.
S&F PVC (SWR) 110 mm bore branch piece, double (double Y), equal or unequal with access door complete all as specified and as directed.
Supply and fix in repair rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) 500 liters capacity white colour triple layer, hoisted and fixed on roof in position including ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20 mm iron pipe complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of cable etc. and getting out in soft/loose soil complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.
M&L brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:3 complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces brick wall or concrete surface in cement mortar 1:4 finished even and fair complete all as specified and as directed.
Removing excavated soil to a distance exc 250 m but n exc 500 m and depositing where directed at a level of n.exc 1.5 m above the starting point all complete all as specified and as directed.
M&L for providing precast cement concrete type B1 1:2:4 (using 20mm graded aggregate) in landing cover slabs (for manholes etc) chajjas, shelves and similar articals with plain faces and set in cement mortar 1:6 complete all as specified and as directed.
Construction of Soakage well of 1.80 mtr dia and 3.0 mtr deep complete all as specified and as shown in drawing No CEAA/TD/80 SHT : 1.2 & 2.2 dated 01.12.1993 which includes the following:- (i) Excavation and earth work, including R/F and removal of surplus soil. (ii) Cement concrete in foundation, brick work using fly ash bricks. (iii) Reinforced cement concrete, form work, reinforecement (iv) Precast cover slab, plastering, filling brick agreggate and all CI pipes and fitting complete all as shown in drawing and as specified.
Taking down carefully copper/aluminum copper point wiring (light, fan, socket or power, bell etc.) complete including fixtures & fittings such as ceiling rose, socket, Pendant, regulator, sockets, light fitting etc and removing the material from site and making good the disturbed surfaces of walls, ceiling etc complete all as directed.
Taking down carefully old unserviceable submain wiring of any type complete all as specified and as directed.
Taking down old unserviceable existing SPN/TPN DB/ enclousers any size and type/any descriptions as iron sheet scrap including MCB any type/size and making good disturbed surface/wall as per existing complete all as specified and as directed.
M & L for point wiring with 1.5 Sqmm (nominal area) PVC single core PVC sheathed (FRLS) copper conductor cable, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less than 20mm dia) and its all accessories complete concealed in wall incl cutting & chases (making good all to the disturbed surfaces as per existing) and modular flush metal boxes including base plate and cover plate for mounting modular switches, sockets, regulators etc or including sunk cast iron/pressed steel/terminal boxed for mounting flush type switchs/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire of PVC single core sheathed (FRLS) copper conductor cable of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge for the followings:-
One light/fan/exhaust point controlled by one modular switch 5 amp complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one modular switch on same board complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one modular switch on independent board complete all as specified and as directed.
All as per item No. 79 here-in-above but for 3/5 pin 16 Amps modular socket independent with 4 Sqmm PVC sheathed (FRLS) copper conductor cable complete all as specified and as directed .
M&L for Sub Main wiring with two runs of single core 10 Sqmm PVC insulated FRLS copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 10 Sqmm single core pre insulated copper conductor FRLS green colour as earth wire all as specified and as directed. Note :- Two run of 10 Sqmm, one run of 10 sqmm earth wire and one run of PVC conduit shall be measured as one unit length.
Supply and Fixing ceiling rose three phase/pre/polycarbonate, isolated body complete all as specified and as directed.
Supply and Fixing Modular switch one-way, 6 Amps 1 Module complete all as specified and as directed.
Supply and Fixing Modular switch one-way, 16 Amps 1 Module complete all as specified and as directed.
Supply & Fixing Modular fan Regulator electronic 120 watt, 1 module complete all as specified and as directed.
Supply and fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.
Supply and Fixing Modular socket 6 Amps - 2/3 pins combined 2 Module complete all as specified and as directed.
Supply and Fixing Modular socket 6A/16A-2/3 pin combined 2 Module complete all as specified and as directed.
Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light fitting with 1x 20 watt LED Tube including polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fix LED 9 W suitable for normal holder (Base Cap B22) complete all as specified and as directed.
S&F in repair sheet metal enclosure for housing MCB's Double door, single pole and neutral 240V, 12 way with 200 Amp rated bus bar complete all as specified and as directed.
S&F in repair sheet metal enclosure for housing MCB's Double door, single pole and neutral 240V, 8 way with 200 Amp sated bus bar complete all as specified and as directed.
S&F MCB SPN 40-63 Amps, 240 V 'C' series , breaking cap10KA complete all as specified and as directed.
S&F MCB SP 6 - 32 Amps, 240 V 'C' series, breaking cap 10KA complete all as specified and as directed.
Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed.
M&L for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed.
Taking down the ceiling/exhaust fan of any sweep carefully from its installed position, dismantling complete with down rod , replacement of capacitor, Rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying including filling cavities with filler, writing MES No. with black paint, and keeping a side safely and hanging / refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as directed. Note : All the spare parts capacitor shall be included in the quoted rate.
Dismantling unserviceable ball bearing and supply and fix ball bearing suitable for ceiling fan complete all specified as and directed.
Material & labour for removing the defective exhaust fan winding upto 450mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and as directed
Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete all as specified and as directed.
Taking down unserviceable cable any size and description complete all as specified and as directed.
Removal of excavated surplus soil any type to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.
Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm complete all as specified and as directed.
Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with stranded aluminium conductor of size 25 sqmm 2 core, laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and as directed.
Supply & fixing indoor 2x2 34/36 watt LED panel light complete with fittings integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
Material & labour for removing the defective ceiling fan winding upto 1200mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and as directed
B S ENTERPRISES
M/S ANIL KUMAR
Shiva Traders
mh enterprises
KASHI NATH BANWARI LAL
brajcon
M/S PREETI CONSTRUCTION
M/s Hoti Lal Contractor
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .