Construction of 400KV GSS Hanumangarh along with Bay work at Rawatsar, Udyog Vihar and Sriganganagar under RVPN/KfW/NCB-3/BN-9019002415

Amount

MAIN MATERIAL/ ITEMS

33/.433 kV, 800 kVA, LT three phase transformer

33/.433 kV, 800 kVA, LT three phase transformer complete with all fittings, accessories and associated equipment as per specification.

Spares

i) Bushing with metal parts & gaskets(HV&LV)

ii) Winding temperature indicator with contacts

iii) Oil temperature indicator with contacts

iv) Pressure relief device

v) Buchholz relay complete with contacts

vi) Magnetic oil level gauge

vii) Set of gaskets

33/.433 kV, 630 kVA, LT three phase transformer

33/.433 kV, 630 kVA, LT three phase transformer complete with all fittings, accessories and associated equipment as per specification.

Spares

i) Bushing with metal parts & gaskets(HV&LV)

ii) Winding temperature indicator with contacts

iii) Oil temperature indicator with contacts

iv) Pressure relief device

v) Buchholz relay complete with contacts

vi) Magnetic oil level gauge

vii) Set of gaskets

Circuit Breaker

420 kV, 3150 Amp., 50 kA rupturing capacity circuit Breaker suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

420 kV, 3150 Amp., 50 kA rupturing capacity circuit Breaker for controlling Shunt Reactor (Bus Type), suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

Microprocessor based point of wave controller for above item

Spares for 400 kV circuit breaker

(i) One pole of circuit breaker with grading capacitor complete with pole column and interrupter with M.B. but without support structure and operating mechanism.

(ii) Rubber gaskets, ‘O’ rings and seals

(iii) Fixed Contacts

(iv) Moving Contacts

(v) Terminal pads and connectors

(vii) Closing Assembly Valve

(viii) Trip Assembly Valve

(ix) Auxiliary Switch Assembly

(x) Operation Counter

(xi) Closing Coils

(xii) Tripping coils

(xiii) Support insulator complete for one pole of breaker

245 kV, 2000 Amp., 50 kA rupturing capacity circuit Breaker suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

Spares for 245 kV circuit breaker

(i) One pole of circuit breaker complete with pole column and interrupter with M.B. but without support structure and operating mechanism.

(ii) Rubber gaskets, ‘O’ rings and seals

(iii) Fixed Contacts

(iv) Moving Contacts

(v) Terminal pads and connectors

(vii) Closing Assembly Valve

(viii) Trip Assembly Valve

(ix) Auxiliary Switch Assembly

(x) Operation Counter

(xi) Closing Coils

(xii) Tripping coils

(xiii) Support insulator complete for one pole of breaker

Current Transformer

3000-2000-1000/1-1-1-1-1 Amp. 420 kV, 50 kA single phase multi core current transformers (Live Tank Type only)

Terminal Connectors for above item

Spare of 420kV Current Transformer

(i) Complete CT(Live Tank Type only)

(ii) Terminal Connector for above item 3.04

2000-1000-500/1-1-1-1-1 Amp. 50 kA, 245 kV single phase multi core current transformers (Live Tank Type only)

Terminal Connectors for above item

Spare of 245kV Current Transformer

(i) Complete CT(Live Tank Type only)

(ii) Terminal Connector for above item

Capacitive Voltage Transformer

420 kV single phase 4400 pF CVT suitable for high frequency (HF) coupling required for power line communication with voltage ratio 400/0.11 kV and three secondary windings.

Terminal Connectors for above item

Spare of 420kV Capacitive Voltage Transformer

Spare of 420kV Capacitive Voltage Transformer

Terminal Connectors for above item

245 kV single phase 4400 pF CVT suitable for high frequency (HF) coupling required for power line communication with voltage ratio 220/0.11 kV and three secondary windings.

Terminal Connectors for above item

Spare of 245kV Capacitive Voltage Transformer

(i) Complete CVT

(ii) Terminal Connector for above item

36kV, 52kV class EMVT

Terminal Connectors for above item

Isolator

420 kV 3150 Amp. triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

420 kV 3150 Amp. triple pole, gang operated horizontal double break type motor operated, outdoor Isolator metallic with double earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

Spares for 420 kV Isolators

i) One complete pole with support insulator and motor operating mechanism excluding structure

ii) Copper contact fingers for male and female contacts.

iii) Open / close contactor assembly, timers, key interlock push button switch

iv) Limit switch and auxiliary switch

v) Motor housing bearing assembly

vi) Terminal pads and connectors

vii) Motor with gear assembly and bevel gear assembly

viii) Bearings

ix) Current carrying assembly

x) Interlocking coil

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp. , 50 kA triple pole, gang operated horizontal double break type motor operated, outdoor Isolator metallic with double earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic for tandem operation complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

Spares for 245 kV Isolators

i) One complete pole with support insulator and motor operating mechanism excluding structure

ii) Copper contact fingers for male and female contacts.

iii) Open / close contactor assembly, timers, key interlock push button switch

iv) Limit switch and auxiliary switch

v) Motor housing bearing assembly

vi) Terminal pads and connectors

vii) Motor with gear assembly and bevel gear assembly

viii) Bearings

ix) Current carrying assembly

x) Interlocking coil

72.5 kV , 800 Amp. , triple pole, gang operated, horizontal double break type Isolator without earth switch alongwith complete metallic and accessories.

Terminal Connectors for above item 5.45

Post insulators for above item 5.45

33 kV D.O. Fuse Set including terminal Connectors

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 390 kV lightning arresters suitable for connection between phase and ground on 3 phase 420 kV neutral grounded system complete with insulating base, surge counter and current meter, accessories.

Terminal Connectors for above item

Spare of 390kV Surge Arresters

(i) Complete LA with insulating base

(ii) Terminal Connector for above item 6.04

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 198 kV lightning arresters suitable for connection between phase and ground on 3 phase 245 kV neutral grounded system complete with insulating base, surge counter and current meter, accessories.

Terminal Connectors for above item

Spare of 198kV Surge Arresters

(i) Complete LA with insulating base

(ii) Terminal Connector for above

42 kV, 52kV class Lightning arresters

Terminal Connectors for above

Wave Trap

400 kV, 1.0mH / 3150 A. Wave Traps Pedestal mounting type with tuning unit, protection device, terminals clamps, corona rings, bird barriers etc.

220 kV, 0.5 mH / 3150 A Wave traps with tuning unit protection device, terminals clamps, corona rings, bird barriers etc. Including remote end.

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

400kV Relay Panel for line with auto reclose scheme Type-SAS-FRC

400kV Relay Panel for 500MVA, 400/220kV Transformer Type-SAS-THRC

400kV Relay Panel for Tie Breaker with Auto Reclosure scheme and common Relay Panel Type SAS-BTRC

400kV Relay Panel for 125 MVAR Bus Reactor Type SAS-BSRB

400kV Relay Panel for 50 MVAR Line Reactor Type SAS-BSRB

220kV Relay Panel for feeder Type SAS-FRB

220kV Relay Panel for 500MVA, 400/220kV Transformer Type: SAS-TLRC

220kV Relay Panel for Transfer Bus Coupler Type: SAS-BCRB

220kV Relay Panel for 25 MVAR Bus Reactor Type: SAS-BSRB

220 kV relay panel for sectionalizer Type: SAS-BCRB

400kV Control Panel for line with auto reclose scheme Type-SAS-FCC

400kV Control Panel for 500MVA, 400/220kV Transformer Type: SAS-THCC

400kV control Panel for Tie Breaker with Auto Reclosure scheme and common Relay Panel Type SAS-BTCC

400kV Control Panel for 125 MVAR Bus Reactor Type SAS-BSRBB

400kV Control Panel for 50 MVAR Line Reactor Type SAS-BSRBB

220kV Control Panel for feeder Type SAS-FCB

220kV Control Panel for 500MVA, 400/220kV Transformer Type-SAS-TLCC

220kV Control Panel for Transfer Bus Coupler Type: SAS-BBCB

220 kV Control panel for 25 MVAR Bus Reactor Type: SAS-BSCB

220 kV Control panel for sectionalizer Type: SAS-BBCB

Bus Bar Protection Scheme having one no. central unit and 16 nos. peripheral units (PU) considering all existing and future dia of 400kV Switchyard designed for one & half breaker scheme (IEC-61850 Compliant).

Bus Bar Protection Scheme having one no. central unit and 22 nos. peripheral units (PU) considering all existing and future bays of 220kV Switchyard designed for double main and transfer bus scheme with sectionalizer (IEC-61850 Compliant).

GPS with Digital clock

Necessary software and hardware alongwith laptop to up / down load the data / from the relays from / to the laptop. The supply of laptop is covered under this scope.

Mandatory Spares for C&R panels (similar items as used in the quoted panels)

Line relay Panel:

· Main-I type relay

· Main-II Type Relay

· LBB Relay

· Auxiliary relay, Tripping Relay, Supervision relays, timers (one of each type used in the panel)

· Under-voltage relay for isolator/earth switch

· LBB Relay

Transformer Relay panel

· Main-I type Differential relay

· Main-II type Differential relay

· High impedance differential (Circulating current) Relay

· Over flux relay

· Transformer overload protection relay

· Restricted Earth fault relay

· Directional back up over current & E / F relay with non directional high set feature.

· Three phase trip relays, Flag relays, auxiliary relays, timers (One of each type used in the panel)

Shunt Reactor Relay panel

· Numerical differential protection Relay

· High impedance differential (Circulating current) Relay

· Restricted Earth fault relay

· Back up impedance relay

· Auxiliary, Tripping, supervision relays (One of each type used in the panel.

· Restricted Earth fault relay

Tie Breaker / Bus coupler / Sectionlizer / Transfer bus coupler.

· Auto Relcose Relay

· Non directional over current & earth fault relay.

400kV Bus bar Protection

· Peripheral unit (PU)

220kV Bus bar Protection

· Peripheral unit (PU)

SUBSTATION AUTOMATION SYSTEM

Complete substation automation system alongwith necessary spares for 5 years satisfactory operation as per scope of the specification.

Supply. erection, testing & commissioning of Ethernet Switch, OFC, BCU, IEDs etc. to complete the scope specification .

Phaser Measurement Unit

Phaser Measurement Unit along with fibre optic connectivity, Global Posioning System Receiver and communication Equipment.

PLCC EQIPMENTS

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

VFT equipment (Modem) suitable for transmission of Data through PLCC links based on frequency shift keying modulation techniques programmable for both baud rate from 50 Baud to 2400 Baud and center frequency through switches or jumpers (A.F. Shift Channel)

Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

HF Armoured Coaxial cable having 125 Ohms unbalanced impendance.

PLCC Electronic Private Automatic Exchange (EPAX) suitable for 24 subscribers lines and 16 tie lines with redundancy of critical cards.

Telephone Sets (Push Button Type)

20 Pair jelly filled armoured telephone cable having copper conductor of Dia. 0.63 mm.

5 Pair jelly filled armoured telephone cable having copper conductor of Dia. 0.63 mm.

5 Pair jelly filled unarmoured telephone cable having copper conductor of Dia. 0.5 mm.

Copper cables 4x6 sq mm for PLCC (2 Run)

Sleeved copper wire of 8 SWG.

Any other item bidder may require to complete the PLCC system as per the specification requirement (if amount quoted, list of items , list of items alongwith quantity be indicated in technical offer)

Mandatory Spares

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

VFT equipment (Modem) suitable for transmission of Data through PLCC links based on frequency shift keying modulation techniques programmable for both baud rate from 50 Baud to 2400 Baud and center frequency through switches or jumpers (A.F. Shift Channel)

Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

Cards for PLCC carrier terminal for each type

Coaxial cable

Set of electronic cards of each type

Coaxial connectors

Straight through joint

FOTE TERMINAL EQUIPMENTS

Fully wired cabinet with base 19” equipment rack (incl. front cover, cable tray, common cards) with fan unit and control, synchronization, Alarm, dual Power supply input cables

Central Processing Card – CPU

Power supply unit – 48 VDC 85 W

OLTE – 4 Port STM-1/4/16 Card along with SFPs U1.2, U4.2, U 16.2

Optical Amplifier / Booster equipment (comprising of wave length translator, Wavelength Converter, Booster Amplifier; 21 dBm, Pre Amplifier and Raman Amplifier + Software) for main as well as protected parts

OFC Patch Cords (Set of 48 nos.)

8 Port 2w/4w E&M interface Card

4 port Data Interface Card (Programmable)

4 Port Data interface Card (Programmable) for remote end (to be located at nearest SLDC / Sub-LDC)

Ethernet over SDH transport card (with four 10/100 base, one 100Base – FX and one 1000 Base-LX/SX front interfaces)

4 command integrated Tele-protection Card

MPLS TP Interface card

Engineering Order Wire Phone

Craft Terminal (LAPTOP PC) with element manager software

Interface Cable for Power, Data, Voice, Tele-protection, Time Synchronizing etc. as per respective site requirement

Approach Cable and necessary joint box for OPAW

Optical Fibre Distribution Panel (for 48 fibre) with spleing and patch parul

Optical Fibre Distribution Panel (for 96 fibre) with spleing and patch parul

HDPE Duct Pipe for OPGW

BATTERY AND BATTERY CHARGER

220 V, 600 AH Tubular Lead Acid Battery set along with accessories, stand etc.

220V, 100Amp/70Amp float cum boost Battery Charger (Separate sections for float and boost charging operation).

Spare for 220 V, 600 AH Tubular Lead Acid Battery set

i) Cells for 220 V bank

ii) Connectors

iii) Terminal lugs

iv) Spanner Set

Spare for 220 V battery charger

i) Set of control cards for charger

ii) Set of relays

iii) Rectifier transformer

iv) Control transformer

v) Series inductor

vi) Micro-Switches

vii) Filter Capacitor

viii) Thyristor diode

ix) Set of switches

x) Set of wound resistors

xi) Potentiometers

xiii) Fuses of thyristor with indicators

48 V, 600 AH VRLA Battery set along with accessories, stand and spares.

Spare for 48 V, 600 AH VRLA Battery set

i) Cells for 48 V bank

ii) Connectors

iii) Terminal lugs

50 V, SMPS battery charger of 100 Amp. DC Load capacity alongwith additional one No. 25 SMPS Module.

LT SWITCHGEAR

AC DISTRIBUTION BOARD

415 V, 1000 A, AC Main switch board

415 V, 400 A, AC Distribution Board

415 V, 400 A, Main lighting Distribution Board

415 V, 200 A, Emergency lighting Distribution Board

3 Phase, 415V, 800Amp. Changeover switch

415 V, Air conditioning distribution panel

SPARES

MCCB of each rating

MCB of each rating

LT Breaker

Spring Charging motor

Aux. contact set

Moving contacts set

Fixed contacts set

Spring closing / opening

Closing Coil

Tripping coil

Aux. finger contacts

Limit Switches

Breaker Trolley

Relays

CTs and PTs

DC DISTRIBUTION BOARD

220 V, 400 A, DC Distribution Board (for 2 DC Sources in two parts with bus coupler)

50 V, 200 A, DC Distribution Board (for 2 DC Sources in two parts with bus coupler)

Spares

MCCB of each rating

MCB of each rating

CT, PT (each type)

Voltmeter and Ammeter (each type)

Fuses (each type)

Indicating bulbs

Note:- ACDB & DCDB should be designed in such a manner so that each AC and DC feeder have duplicate connectivity.

DG SET

Diesel Generator set of stationary type having a net electrical out put of 160KVA capacity at specified site conditions with all its accessories for installation at 400 kV substation

Spare

i) Set of filters

ii) Solenoid coil assembly

iii) Self starter assembly

iv) Lub oil pressure safety control

v) High water temp. safety control

vi) AVR card for each type of DG set

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

400 kV Double Tension String assembly with double anchoring points with 25 Nos. antifog type disc insulator per string with all hardware accessories including corona ring, turn buckle, arcing horn and tension clamp set suitable for Twin / quadruple Moose ACSR bundle with 450 mm sub-conductor spacing.(with/ without turn Buckle)

400 kV Single Suspension string insulator assembly with 25 Nos. anti fog type disc insulators with all hardware accessories including corona ring with dropper / through type clamp set for Twin / quadruple Moose ACSR with 450 mm sub-conductor spacing..(drop/through type)

245 kV double tension string assembly with single anchoring points with 15 Nos. anti fog type disc per string with all hardware accessories, including corona ring, turn buckle, arching horn and tension clamp set suitable for single / Twin Tarantulla bundle with 300mm sub conductor spacing.(with/ without turn Buckle)

245 kV single suspension string insulator assembly with 15 Nos. anti fog type disc insulators with all hardware accessories including corona ring, arching horn and suitable for through / drop clamp set for single / Twin Tarantulla bundle with 300mm sub conductor spacing..(drop/through type)

a) 400 kV Bus Post Insulator stacks with corona ring other than those not included with individual equipment.

b) 245 kV Bus Post Insulators other than those not included with individual equipment.

c) 72.5 kV Outdoor Post Insulators other than those not included with individual equipment.

400 kV Corona bellow / sphere for 4” IPS Al. tube

a) 400 kV clamps and connectors other than those not included with individual equipment.

b) 245 kV Clamps and Connectors other than those not included with individual equipment.

c) 72.5 kV Clamps & Connectors other than those not included with individual equipment.

d) All type clamp and connectors for earthwire and GS flat

a) 400 kV Spacers(All types Rigid/Flexiable )

a) 245 kV Spacers(All types Rigid/Flexiable )

Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories

EARTHING MATERIAL (GS & MS flats of all sizes and Cu/Al Flexible braids)

(a) 40 mm dia MS Rod

(b) 40 mm dia 3000 mm long MS rod (earth electrodes) with/without test links, RCC pits, C.I .cover hinged at C.I. frame alongwith all associated civil works

(c) 40 mm dia, 3000 mm long GS pipe electrodes with test links and treated earth pits with C.I. cover hinged to C.I. frame alongwith all associated civil works

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

a) 4” IPS (EH) Al. Tube (OD. 114.2 mm, Thickness-8.51 mm)

b) 3” IPS (EH) Al. Tube (OD. 73.03mm Thickness 7.01mm)

a) Welding sleeves for 4” IPS Al. tube

a) Welding sleeves for 3” IPS Al. tube

Earthwire tension clamps with D. Shackle assembly and earth bond

Lugs to suit 10.98 mm GS Earthwire

Junction boxes

Marshalling Kiosk

a) For 400 kV

b) For 220 kV

Cables (FRLS)

(a)1.1 KV grade PVC insulated armoured control cables – Cu

(b) 1.1 kV grade XLPE / PVC insulated armoured Al. conductor power cable

Straight through joints for 1.1 kV XLPE / PVC power cables as required

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

Hume pipes for road crossing (NP-4 class). (Sizes shall be recommended by the bidder)

Pressure die cast AL (LM6) Nylon 6 made trefoil clamp for recommended cables

MS Angle Flat and ISMC channel (All size)

ACSR Moose conductor

AAC Tarantulla conductor

10.98mm dia GS earth wire

72.5 kV, 50 Amp. single phase horn gap fuse unit (Three phase)

Heat shrinkable tube / tape

52 KV XLPE Power Cable with all accessories

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

Cable Trays

PVC Wires

Fibre Ladders (6/7 m)

Mobile Flood Light Tower

CONTROL ROOM BUILDING AND STREET LIGHTING

Lighting transformers (100 KVA)

Steel tubular poles with PVC wire JB , MCB, piller box complete cableling , panels etc complete in all respect

Elergy Efficent outdoor lights complete in all respect

Fiber Ladder (3 Mtr)

Any other items ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Spares

Energy Efficent flood light complete in all respect

Energy Efficent outdoor lights complete in all respect

Capacitors of each rating

MCCB each rating

MCB of each rating

Timer

FIRE FIGHTING SYSTEM ( AS PER TECHNICAL SPECIFICATION)

Mulsifyre System

Diesel Engine driven pump set of 410 M3/hr capacity 70 M Head

(a) Diesel engine pump complete with accessories

(b) Foot valve with strainer 300 mm

(c) Stop valve 250 mm

(d) CIDF suction pipe 300 mm

(e) Fittings

(f) Diesel Engine Controller with VRLA Maintenance free Battery, SMPS charger complete

Electric Motor driven pump set of 410 M3/hr capacity 70 M Head

(a) Pump & motor complete with starter

(b) Foot valve with strainer 300 mm

(c) Stop valve 250 mm

(d) CIDF suction pipe 300 mm

(e) Fittings

Air Vessel size 300 mm dia 1500 mm long

Set of interconnecting pipes, stop valves for interconnecting in pump house building

(a) 250 mm dia Gate valve

(b) 250 mm dia Steel pipe

Mulsifyre Strainer

Automatic starter, Diesel Engine starting panel

Compressor with driving motor

G.I. piping with fittings

(a) G.I. pipe 25 mm dia

(b) Fittings for 25 mm dia pipe

M.S. pipes suitable for overground and under ground as per relevant BIS

(a) 250 mm dia pipe.

(b) Fittings for 250 mm dia pipe

(c) 200 mm dia pipe.

(d) Fitting for 200 mm dia pipe

(e) 150 mm dia pipe.

(f) Fittings for 150 mm dia pipe

(g) 100 mm dia pipe.

(h) Fittings for 100 mm dia pipe.

Set of Deluge valve stop valves, supports projectors, detectors with pipe, alarm motor and gang for the mulsifyre protection of shunt reactors.

(a) Mulsifyre projectors

(b) Quartzoid bulb Detectors

(c) 150 mm dia Deluge valve

(d) 250 mm dia Drain valve

(e) 150 mm dia GI pipe

(f) 100 mm dia GI Pipe

(g) 80 mm dia GI Pipe

(h) 50 mm dia GI Pipe

(i) Alarm Motor & Gonge

(j) D.A. Switches

Alarm & 32 section Annunciation panel for complete installation

LT distribution Panel suitable for 3 ½ x 300 sq. mm. incoming & 6 Nos. 3 ½ x185 / 95 Sqmm for 3 Phase outgoing feeders of capacity meeting the requirement of each motor

Set of Deluge valve stop valves, supports projectors, detectors with pipe, alarm motor and gang for the mulsifyre protection of shunt reactors.

(a) Mulsifyre projectors

(b) Quartzoid bulb Detectors

(c) 150 mm dia Deluge valve

(d) 250 mm dia Drain valve

(e) 150 mm dia GI pipe

Power Cables & Control Cables

(a) 3 ½ x 300 Sqmm FRLS Cable

(b) 3 ½ x 185 Sqmm FRLS Cable

(c) 3 ½ x 95 Sqmm FRLS Cable

(d) 3x30 sq. mm. FRLS cable

(e) Control cable (Copper)

(f) Earthing

Note :- BOQ shown above is indicate only. It shall be finalized at the time of detail engineering as per the specification / requirement

Hydrant System

Electric Motor driven pump set of 410 M3/hr capacity 70 M Head

Electric pump motor & starter complete

Foot valve with strainer

Stop valve & size

CIDF suction pipe & size

Fittings

Pump & infeed piping with automatic priming arrangement

Air vessel of 300 mmdia 1.5 metre long

Set of pipes & valves

Check valve & size

Gate valve & size

Steel pipe 7 size

Elbow & size

Electric Control Panel including switchgear & wiring for manual and automatic start / stop of pumps

Ring main with pipes and fittings

150mm dia CITJ pipe / MS pipe

Fittings of 150mm dia pipe

100 mm dia CITJ pipe / MS pipe

Fittings of 100mm dia pipe

Hydrant Female Oblique type with stand pipe

Single headed stand pipe

Double Headed stand pipe

Gun metal landing valve

150mm dia Isolator valves

63mm dia 15M long hose pipe

Hose cabinets

Branch pipe & jets

Fog type Nozzle

Any other specified item for completion of Hydrant system ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note :- BOQ shown above is indicate only. It shall be finalized at the time of detail engineering as per the specification / requirement

FIRE DETECTION AND ALARM SYSTEM

Micro-processor based Main fire detection control panel wired for suitable number of zones complete with control unit P.S. system, built in a battery and battery charger

Addressable Photo Electronic light scattered smoke detectors

Addressable Photo Electronic light scattered smoke detectors with duct caging

Addressable lonization chamber smoke detector

Linear Heat sensor cable

Heat Detector

Electronic Hooters

FRLS Control cables

2x1.5 sq.mm

10x1.5 sq.mm

NOTE :- Quantities of each item shall be finalized during approval of detailed engineering for respective substations. Capacity may vary as per IS.

HAND APPLIANCES

Pressurized, water type portable fire extingusher of 9 litre capacity complete with fill

Dry chemical powder type portable fire extingusher of 5 Kg. capacity complete with fill

Carbon di-oxide type portable fire extinguisher of 4.5 Kg. capacity complete with fill.

Fire Bucket with Stand

NOTE :- Quantities of each item shall be finalized during approval of detailed engineering for respective substations. Capacity of may vary as per IS.

SPARES FOR MULSIFYRE / HYDRANT SYSTEM

HVW – Pumps & Jockey pump

a)Shaft-Sleeve

b)Gland packing

Diesel Engine drive

a)Fuel oil filter

b)Lubricating oil filter

Nozzles (10% of total)

Quartzoil Detectors

Level Switch

Pressure Switch

Hydrant Valve

SPARES FOR FIRE ALARM

Smoke Detectors (10% of total)

Photo electric type (10% of total)

Ionization type (10% of total)

Heat Detectors (10% of total)

AIR-CONDITIONING AND VENTILATION SYSTEM WHICH SHALL INCLUDE FOLLOWING

Design, supply, installation, testing and commissioning of Air conditioning & ventilation system for the control room building for following rooms alongwith the necessary spares for satisfactory operation for 5 (five) years.

i) Control Room and OLTE / SAS Panel Room

ii SE / XEN Room

iii) Battery Room

iv) Rest Rooms etc.

Design, supply, installation, testing and commissioning of Air conditioning & ventilation system for all kiosks of bay level units in switchyard as per Section-II Vol-II (Air conditioning)alongwith the necessary spares for satisfactory operation for 5 (five) years.

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

Lignting Mast 24 m Height

Tower (400 kV) MKD TC

Tower (400 kV) MKD TH

Tower (400 kV) MKD TI

Tower (400 kV) MKD TJ

Tower (400 kV) MKD TM

Tower (400 kV) MKD TK

Tower (400 kV) MKD TG

Girder (400 kV) MKD G1

Girder (400 kV) MKD G2

220 kV tower type AT4

220 kV tower type AT8 (A6 With Peak)

220 kV tower type AT6 (Without Peak)

220 kV tower type AT1

220 kV Beam type AB1 / AB2

400 kV C.T. Support Structure

220 kV C.T. Support Structure

Pipe structures

400 kV CVT

220 kV CVT

400 kV Surge Arrestor

220 kV Surge Arrestor

400 kV Isolator

220 kV Isolator

400 kV Wave Trap

220kV Wave Trap

400 kV BPI

220 kV BPI

72.5 kV Isolator

42kV, 52 class Lightning arresters

36kV, 52 class EMVT (3 phase)

72.5 kV Horn gap fuse (3 phase)

72.5 kV Post insulators

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

TESTING AND MEASURING EQUIPMENTS

50 k-Ohms Earth Tester

Insulation Tester / Meggar (5 kV)

Digital Multi-meter

Digital Clamp Meter(Low range)

Analog Multi-meter

Universal Computerized Relay Test Kit alongwith Laptop (i7, 1.8 GHz, 14” TFT, 1 TB HDD, 8 GB Ram, DVD R/W) and associated configuration software

Dew Point Meter

Contact Resistance Meter

Microprocessor Based Transformer oil Resistivity & Tan Delta measurment kit

Three Phase Transformer Turn Ratio Tester Meter

SF6 Gas Leakage Detector

Circuit Breaker Analyzer

SF6 Gas filling and evacuation Kit

Portable Primary Injection Test kit

Microprocessor Based Dielectric Strength Analyzer

SFRA Test Kit

Digital Clamp Meter(High range)

CT Analyser

Multi function test kit

Portable Online DGA Analyser

Low Range Tong Tester

GENERAL TOOLS & TACKLES

Vacuum Cleaner

Ring Spanner Set

Tube Spanner Set

Pipe Wrench 24”

Pipe Wrench 18”

Heavy Duty Drilling Machine

Rechargable Torch

Insulated cutting plier 12”

Insulated cutting plier 8”

Line live tester

Screw Driver 18”

Screw Driver 12”

Hammer 8 lbs

Hammer 2 lbs

Allen keys

Box spanner Set

Screw Driver Set

Hydraulic Crimping Tool up tp 630 Sq mm.

OFFICE & MISCELLANEOUS EQUIPMENTS / ITEMS

Furniture for Control Room building

Junior executive table with three drovers on right side One Cup board left side with prelaminated decolam top 20mm thick over painted M.S. Frame ( 4 ½ feet x 2½ feet x 2½ feet) )

Control Desk Type Table for Control room accommodating the Main and Redundant Computer System monitors, Workstations, printer, Logger, Maintenance / Engineering Terminal, telephone etc.(Size, Shape, Colour etc. to be got approved from Owner)

Steel tubular chair “S” type with continuous and one feet dia 14 gauge pipe, cane seat backing, teak wood with quality cane.

Five Leg Revolving Chair with arms

Steel Almirah of size 6½ feetx3 feet x 19 inch with four shelves making five compartments in 18 guage with three way locking system

Steel Almirah (With Glass door) of size 6½ feetx3 feet x 19 inch with four shelves making five compartments in 18 guage with three way locking system

Minor Almirah of size 4½ feet x 30 inch x 17 inch with three shelves making four compartments in 18 guage with three waylocking system

Steel rack of size 5 feet x 3 feet x 16 inches with six shelves making five compartments (22 guage)

Steel stools of size 15 inch x 15 inch x 18 inch square pipe 16 guage

Short bench of 4 feet x 14 inch x 1 ½ inch with laminated top.

Steel waste paper baskets of size 12 inch x 10 inch x 10 inch

Canopy 6 x 6 x 7 Ft with stand

Camping Folding Chair Outdoor Garden,

Key board (wooden)

First Aid box

Shock Treatment Chart

REFRIGERATOR

Micro Wave

1800 W Induction Cooktop

Substation Glow sign board Size and Colour etc. to be got approved from owner)

Danger Plate (Size and colour etc. to be got approved from owner)

Insulated mat (SMC Chequered ) (5m x 1m x3mm)

Insulation Rubber Gloves (15 kV Tested)

SAFETY HELMETS

EARTHING ROD

Man Liffter (Hydraulic)

Polo Cart (Battery operated)

COMPUTER & Printer

Desktop Computer

Laser Printer

Filter Machine

Truck Mounted filter Machine (12 KL)

Spares for Filter Machine

Cratrage typr filter

Heater Element

Inlet Stainer

Solar panel system complete 100 KW

Solar panel system complete 100 KW with all necessary T&P. Cable, Meter, Structure etc.

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

MAIN MATERIAL/ ITEMS

145 kV, 1250 Amp. 40 kA rupturing capacity circuit breaker complete with mounting structures, foundation bolts, nuts and first filling of SF-6 gas plus 20% spare gas including accessories and auxiliaries

Terminal Connectors for above item

Current Transformer

500/1-1-1 Amp. 145 kV single phase multi core current transformers. (Live Tank Type only)

Terminal Connectors for above item

Capacitive Voltage Transformer

145 kV single phase 4400 pF CVT suitable for carrier coupling voltage ratio 132/0.11 Kv (3 Core)

Terminal Connectors for above item

Isolator

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 120 kV lightning arresters suitable for connection between phase and ground on 3 phase 145 kV neutral grounded system complete with insulating base, surge counter and current meter, and all accessories as per specification.

Terminal Connectors for above item

Wave Trap

132 kV, 0.2 mH / 1000 A Wave traps with tuning unit protection device, terminals clamps and accessories etc. Including remote end,

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

132 kV Feeder C&R Panel for feeder (J-II) 1A,110V DC

PLCC EQIPMENTS

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

Coupling Devices for Phase to Ground coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.

Any other item bidder may require to complete the PLCC system as per the specification requirement (if amount quoted, list of items , list of items alongwith quantity be indicated in technical offer)

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

Single Tension hardware for single Panther (Bolted type)

Single Suspension hardware for single Panther (Bolted type)

Disc Insulator 120 KN

Disc Insulator 70 KN

T CLAMP (Z to Z)

T CLAMP (Z to P)

T CLAMP (P to P)

PG CLAMP(Z to Z)

PG CLAMP(Z to P)

PG CLAMP(P to P)

PG Clamp for Earth Wire

Earth witr tension Assembaly

132 kV Outdoor Post Insulators other than those not included with individual equipment.

Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories

EARTHING MATERIAL (GS & MS flats of all sizes and Cu/Al Flexible braids)

M.S. Round 28 mm dia

M.S. Flat 50x10 mm

M.S. Channel 100x 50x6 mm

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

Marshalling Kiosk

For 132 kV (200 Way Stud type)

Cables (FRLS)

18 core x 2.5 sq mm

12 core x 2.5 sq mm

4 core x 2.5 sq mm

4 core x 4 sq mm

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

ACSR Zebra conductor

ACSR Panther conductor

GS earth wire

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

132 KV P Type Structure

132 kv Q type Structure (Without stub)

132 kV R Type Structure

132 kV GDBeam

132kV C.T. Support Structure

132 kV CVT

132kV Surge Arrestor

132 kV Isolator

132 kV BPI

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Service + ETC

145 kV, 1250 Amp. 40 kA rupturing capacity circuit breaker complete with mounting structures, foundation bolts, nuts and first filling of SF-6 gas plus 20% spare gas including accessories and auxiliaries

Terminal Connectors for above item

Current Transformer

500/1-1-1 Amp. 145 kV single phase multi core current transformers. (Live Tank Type only)

Terminal Connectors for above item

Capacitive Voltage Transformer

145 kV single phase 4400 pF CVT suitable for carrier coupling voltage ratio 132/0.11 Kv (3 Core)

Terminal Connectors for above item

Isolator

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 120 kV lightning arresters suitable for connection between phase and ground on 3 phase 145 kV neutral grounded system complete with insulating base, surge counter and current meter, and all accessories as per specification.

Terminal Connectors for above item

Wave Trap

132 kV, 0.2 mH / 1000 A Wave traps with tuning unit protection device, terminals clamps and accessories etc. Including remote end,

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

132 kV Feeder C&R Panel for feeder (J-II) 1A,110V DC

PLCC EQIPMENTS

SSB single Channel Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

A.F. Protection coupler microprocessor based suitable for Four commands.

Coupling Devices for Phase to Ground coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.

Any other item bidder may require to complete the PLCC system as per the specification requirement (if amount quoted, list of items , list of items alongwith quantity be indicated in technical offer)

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

Single Tension hardware for single Panther (Bolted type)

Single Suspension hardware for single Panther (Bolted type)

Disc Insulator 120 KN

Disc Insulator 70 KN

T CLAMP (Z to Z)

T CLAMP (Z to P)

T CLAMP (P to P)

PG CLAMP(Z to Z)

PG CLAMP(Z to P)

PG CLAMP(P to P)

PG Clamp for Earth Wire

Earth witr tension Assembaly

132 kV Outdoor Post Insulators other than those not included with individual equipment.

Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories

EARTHING MATERIAL (GS & MS flats of all sizes and Cu/Al Flexible braids)

M.S. Round 28 mm dia

M.S. Flat 50x10 mm

M.S. Channel 100x 50x6 mm

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

Marshalling Kiosk

For 132 kV (200 Way Stud type)

Cables (FRLS)

18 core x 2.5 sq mm

12 core x 2.5 sq mm

4 core x 2.5 sq mm

4 core x 4 sq mm

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

ACSR Zebra conductor

ACSR Panther conductor

GS earth wire

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

132 KV P Type Structure

132 kv Q type Structure (Without stub)

132 kV R Type Structure

132 kV GDBeam

132kV C.T. Support Structure

132 kV CVT

132kV Surge Arrestor

132 kV Isolator

132 kV BPI

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

ESHS Cost Schedule

Resources allocated to ESHS management

Drafting and updating the ESHS documentation, reporting, inspections

Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene

Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:

i) Accommodation

ii) Meals

iii) Transport

Training and local recruitment management costs

Protection of adjacent areas, biodiversity, prevention of erosion and wastewater management

Traffic, noise and atmospheric emissions management, land take

Waste and hazardous products management

Vegetation clearing and site rehabilitation

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

CIVIL WORKS

FOUNDATIONS :

LATTICE / PIPE STRUCTURE

132 KV P Type Structure

132kV C.T. Support Structure

132 kV CVT

132kV Surge Arrestor

132 kV Isolator

132 KV Circuir Breaker

132 kV BPI

Marshalling Kiosk

CABLE TRENCH

Section C

CABLE TRENCH CROSSING

Design, engineering, construction including supply of labour, material, cement, reinforcement steel, form work etc. and all associated works for construction of cable trench crossings as per technical specification and approved drawings

Section C crossing road

ANTI WEED TREATMENT AND BASE LAYER OF PCC

Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001

JELLY SPREADING (Gravelling)

Providing and laying 100mm thick layer of granite/basalt/trap jelly(gravel) of 40mm single size shall be spread over the entire switchyard area as per drawing and directions of engineer incharge of the work. The whole switchyard area (excluding buildings pathway road, drainages, cable trenches, equipments/ structures plinths etc.) shall be covered with jelly spreading. The jelly used shall be free from dirt, organic materials and flakes.

Supply & Fixing Barricades to confine Jelly (gravel), which include Supply and fixing cement concrete solid blocks of size 30x15x30 cms (l, b, h) jointed with CM 1:4, made from precast M-20 concrete and laid over 100 mm thick base of PCC 1:4:8 including necessary curing etc. complete. The top of concrete block shall be 100 mm above gravel top with provision of suatable openings for drainage of rain water. The exposed surface of barricades shall be applied with two coat of water proof cement paint.

Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete for 300 mm dia internal dia pipe including Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design and Excavating trenches of required width for pipes cables etc. including excavation for sockets, depth up to required depth including taking out the excavated materials, refilling the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, with all lead and lifts in all types of soil, rocks etc complete in all respect.

Any other specified work (If amount Quoted, list of items alongwith quantity be indicated in technical offer)

Description of Work / Item(s)

Amount

Services

500 MVA, 400/220/33 kV auto transformer

500 MVA, 400/220/33 kV, 3 phase, 50 Hz, Auto power transformer with oil for first filling and 10% spare quantity and complete with ON LOAD TAP CHANGER, , Atmoseal conservator,, RTCC panel, bushing CTs, one set of four Nos. Hydraulic jacks and all other fittings and accessories as per technical specification

400 KV, 125 MVAR Bus reactor

400 KV, 125 MVAR Bus reactor with oil for first filling and 10% spare oil complte in all respect as per specification

400 KV, 50 MVAR Line reactor

400 KV, 50 MVAR Line reactor with 145 kV NGR with oil for first filling and 10% spare oil complte in all respect as per specification as per specification

220KV, 25 MVAR Bus reactor with oil for first filling and 10% spare oil complte in all respect as per specification as per specification

NIFPES

Nitrogen Injection Fire Prevention system for 220KV, 25 MVAR Bus reactor as per specification as per specification

33/.433 kV, 800 kVA, LT three phase transformer

33/.433 kV, 800 kVA, LT three phase transformer complete with all fittings, accessories and associated equipment as per specification.

33/.433 kV, 630 kVA, LT three phase transformer

33/.433 kV, 630 kVA, LT three phase transformer complete with all fittings, accessories and associated equipment as per specification.

Circuit Breaker

420 kV, 3150 Amp., 50 kA rupturing capacity circuit Breaker suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

420 kV, 3150 Amp., 50 kA rupturing capacity circuit Breaker for controlling Shunt Reactor (Bus Type), suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

Microprocessor based point of wave controller for above item

245 kV, 2000 Amp., 50 kA rupturing capacity circuit Breaker suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

Current Transformer

3000-2000-1000/1-1-1-1-1 Amp. 420 kV 50 KA single phase multi core current transformers (Live Tank Type only)

Terminal Connectors for above item

2000-1000-500/1-1-1-1-1 Amp. 50 kA, 245 kV single phase multi core current transformers (Live Tank Type only)

Terminal Connectors for above item

Capacitive Voltage Transformer

420 kV single phase 4400 pF CVT suitable for high frequency (HF) coupling required for power line communication with voltage ratio 400/0.11 kV and three secondary windings.

Terminal Connectors for above item

245 kV single phase 4400 pF CVT suitable for high frequency (HF) coupling required for power line communication with voltage ratio 220/0.11 kV and three secondary windings.

Terminal Connectors for above item

36kV, 52kV class EMVT

Terminal Connectors for above item

Isolator

420 kV 3150 Amp. triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

420 kV 3150 Amp. triple pole, gang operated horizontal double break type motor operated, outdoor Isolator metallic with double earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp. triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp. triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp. triple pole, gang operated horizontal double break type motor operated, outdoor Isolator metallic with double earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp. triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic for tandem operation complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

72.5 kV , 800 Amp. , triple pole, gang operated, horizontal double break type Isolator without earth switch alongwith complete metallic and accessories.

Terminal Connectors for above item

Post insulators for above item

33 kV D.O. Fuse Set including terminal Connectors

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 390 kV lightning arresters suitable for connection between phase and ground on 3 phase 420 kV neutral grounded system complete with insulating base, surge counter and current meter, accessories.

Terminal Connectors for above item

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 198 kV lightning arresters suitable for connection between phase and ground on 3 phase 245 kV neutral grounded system complete with insulating base, surge counter and current meter, accessories.

Terminal Connectors for above item

42 kV, 52kV class Lightning arresters

Terminal Connectors for above item

Wave Trap

400 kV, 1.0mH / 2000 A. Wave Traps Pedestal mounting type with tuning unit, protection device, terminals clamps, corona rings, bird barriers etc.

220 kV, 0.5 mH / 1250 A Wave traps with tuning unit protection device, terminals clamps, corona rings, bird barriers etc. Including remote end.

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

400kV Relay Panel for line with auto reclose scheme Type-SAS-FRC

400kV Relay Panel for 500MVA, 400/220kV Transformer Type-SAS-THRC

400kV Relay Panel for Tie Breaker with Auto Reclosure scheme and common Relay Panel Type SAS-BTRC

400kV Relay Panel for 125 MVAR Bus Reactor Type SAS-BSRB

400kV Relay Panel for 50 MVAR Line Reactor Type SAS-BSRB

220kV Relay Panel for feeder Type SAS-FRB

220kV Relay Panel for 500MVA, 400/220kV Transformer Type: SAS-TLRC

220kV Relay Panel for 25 MVAR Bus Reactor Type: SAS-BSRB

220kV Relay Panel for Transfer Bus Coupler Type: SAS-BCRB

220 kV relay panel for sectionalizer Type: SAS-BCRB

400kV Control Panel for line with auto reclose scheme Type-SAS-FCC

400kV Control Panel for 500MVA, 400/220kV Transformer Type: SAS-THCC

400kV control Panel for Tie Breaker with Auto Reclosure scheme and common Relay Panel Type SAS-BTCC

400kV Control Panel for 125 MVAR Bus Reactor Type SAS-BSRBB

400kV Control Panel for 50 MVAR Line Reactor Type SAS-BSRBB

220kV Control Panel for feeder Type SAS-FCB

220kV Control Panel for 500MVA, 400/220kV Transformer Type-SAS-TLCC

220kV Control Panel for Transfer Bus Coupler Type: SAS-BBCB

220 kV Control panel for 25 MVAR Bus Reactor Type: SAS-BSCB

220 kV Control panel for sectionalizer Type: SAS-BBCB

Bus Bar Protection Scheme having one no. central unit and 16 nos. peripheral units (PU) considering all existing and future dia of 400kV Switchyard designed for one & half breaker scheme (IEC-61850 Compliant).

Bus Bar Protection Scheme having one no. central unit and 22 nos. peripheral units (PU) considering all existing and future bays of 220kV Switchyard designed for double main and transfer bus scheme with sectionalizer (IEC-61850 Compliant).

GPS with Digital clock

Necessary software and hardware alongwith laptop to up / down load the data / from the relays from / to the laptop. The supply of laptop is covered under this scope.

SUBSTATION AUTOMATION SYSTEM

Complete substation automation system alongwith necessary spares for 5 years satisfactory operation as per scope of the specification.

Supply. erection, testing & commissioning of Ethernet Switch, OFC, BCU, IEDs etc. to complete the scope specification .

Phaser Measurement Unit

Phaser Measurement Unit along with fibre optic connectivity, Global Posioning System Receiver and communication Equipment.

PLCC EQIPMENTS

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

VFT equipment (Modem) suitable for transmission of Data through PLCC links based on frequency shift keying modulation techniques programmable for both baud rate from 50 Baud to 2400 Baud and center frequency through switches or jumpers (A.F. Shift Channel)

Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

HF Armoured Coaxial cable having 125 Ohms unbalanced impendance.

PLCC Electronic Private Automatic Exchange (EPAX) suitable for 24 subscribers lines and 16 tie lines with redundancy of critical cards.

Telephone Sets (Push Button Type)

20 Pair jelly filled armoured telephone cable having copper conductor of Dia. 0.63 mm.

5 Pair jelly filled armoured telephone cable having copper conductor of Dia. 0.63 mm.

5 Pair jelly filled unarmoured telephone cable having copper conductor of Dia. 0.5 mm.

Copper cables 4x6 sq mm for PLCC (2 Run)

Sleeved copper wire of 8 SWG.

FOTE TERMINAL EQUIPMENTS

Fully wired cabinet with base 19” equipment rack (incl. front cover, cable tray, common cards) with fan unit and control, synchronization, Alarm, dual Power supply input cables

Central Processing Card – CPU

Power supply unit – 48 VDC 85 W

OLTE – 4 Port STM-1/4/16 Card along with SFPs U1.2, U4.2, U 16.2

Optical Amplifier / Booster equipment (comprising of wave length translator, Wavelength Converter, Booster Amplifier; 21 dBm, Pre Amplifier and Raman Amplifier + Software) for main as well as protected parts

OFC Patch Cords (Set of 48 nos.)

8 Port 2w/4w E&M interface Card

4 port Data Interface Card (Programmable)

4 Port Data interface Card (Programmable) for remote end (to be located at nearest SLDC / Sub-LDC)

Ethernet over SDH transport card (with four 10/100 base, one 100Base – FX and one 1000 Base-LX/SX front interfaces)

4 command integrated Tele-protection Card

MPLS TP Interface card

Engineering Order Wire Phone

Craft Terminal (LAPTOP PC) with element manager software

Interface Cable for Power, Data, Voice, Tele-protection, Time Synchronizing etc. as per respective site requirement

Approach Cable and necessary joint box for OPAW

Optical Fibre Distribution Panel (for 48 fibre) with spleing and patch parul

Optical Fibre Distribution Panel (for 96 fibre) with spleing and patch parul

HDPE Duct Pipe for OPGW

BATTERY AND BATTERY CHARGER

220 V, 600 AH Tubular Lead Acid Battery set along with accessories, stand etc.

220V, 100Amp/70Amp float cum boost Battery Charger (Separate sections for float and boost charging operation).

48 V, 600 AH VRLA (maintenance free) Battery set (23 Cells) along with accessories, stand and spares.

50 V, SMPS battery charger of 100 Amp. DC Load capacity alongwith additional one No. 25 Amp. SMPS Module.

LT SWITCHGEAR

415 V, 1000 A, AC Main switch board

415 V, 400 A, AC Distribution Board

415 V, 400 A, Main lighting Distribution Board

415 V, 200 A, Emergency lighting Distribution Board

3 Phase, 415V, 800Amp. Changeover switch

415 V, Air conditioning distribution panel

DC DISTRIBUTION BOARD

220 V, 400 A, DC Distribution Board (for 2 DC Sources in two parts with bus coupler)

50 V, 200 A, DC Distribution Board (for 2 DC Sources in two parts with bus coupler)

Note:- ACDB & DCDB should be designed in such a manner so that each AC and DC feeder have duplicate connectivity i.e. separate connection wiring to source -1 and source-2 (Refer drawings at Volume-II, ).

DG SET

Diesel Generator set of stationary type having a net electrical out put of 160KVA capacity at specified site conditions with all its accessories for installation at 400 kV substation

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

400 kV Double Tension String assembly with double anchoring points with 25 Nos. antifog type disc insulator per string with all hardware accessories including corona ring, turn buckle, arcing horn and tension clamp set suitable for Twin / quadruple Moose ACSR bundle with 450 mm sub-conductor spacing. (WITH/WITHOUT TURN BUCKLE)

400 kV Single Suspension string insulator assembly with 25 Nos. anti fog type disc insulators with all hardware accessories including corona ring with dropper / through type clamp set for Twin / quadruple Moose ACSR with 450 mm sub-conductor spacing.(WITH/WITHOUT TURN BUCKLE)

245 kV single suspension string insulator assembly with 15 Nos. anti fog type disc insulators with all hardware accessories including corona ring, arching horn and suitable for through / drop clamp set for single / Twin Tarantulla bundle with 300mm sub conductor spacing.(Through/Drop type)

245 kV double tension string assembly with single anchoring points with 15 Nos. anti fog type disc per string with all hardware accessories, including corona ring, turn buckle, arching horn and tension clamp set suitable for single / Twin Tarantulla bundle with 300mm sub conductor spacing.(WITH/WITHOUT TURN BUCKLE)

a) 400 kV Bus Post Insulator stacks with corona ring other than those not included with individual equipment.

b) 245 kV Bus Post Insulators other than those not included with individual equipment.

c) 72.5 kV Outdoor Post Insulators other than those not included with individual equipment.

400 kV Corona bellow / sphere for 4” IPS Al. tube

a) 400 kV clamps and connectors other than those not included with individual equipment.

b) 245 kV Clamps and Connectors other than those not included with individual equipment.

c) 72.5 kV Clamps & Connectors other than those not included with individual equipment.

d) All type clamp and connectors for earthwire and GS flat

a) 400 kV Spacers(All types)(Rigid/ Flexiable)

a) 245 kV Spacers(All types)(Rigid/ Flexiable)

Earthwire tension clamps with D. Shackle assembly and earth bond

EARTHING MATERIAL

(a) 40 mm dia MS Rod

(b) 40 mm dia 3000 mm long MS rod (earth electrodes) with/without test links, RCC pits, C.I .cover hinged at C.I. frame alongwith all associated civil works

(c) 40 mm dia, 3000 mm long GS pipe electrodes with test links and treated earth pits with C.I. cover hinged to C.I. frame alongwith all associated civil works

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

IPS Tube

a) 4” IPS (EH) Al. Tube (OD. 114.2 mm, Thickness-8.51 mm)

b) 3” IPS (EH) Al. Tube (OD. 73.03mm Thickness 7.01mm)

a) Welding sleeves for 4” IPS Al. tube

b) Welding sleeves for 3” IPS Al. tube

Bay Marshalling kiosks

a) For 400 kV

b) For 220 kV

Cables (FRLS)

(a)1.1 KV grade PVC insulated armoured control cables – Cu

(b) 1.1 kV grade XLPE / PVC insulated armoured Al. conductor power cable

Straight through joints for 1.1 kV XLPE / PVC power cables as required

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

Hume pipes for road crossing (NP-4 class). (Sizes shall be recommended by the bidder)

Pressure die cast AL (LM6) Nylon 6 made trefoil clamp for recommended cables

MS Angle Flat and ISMC channel (All size)

Conductor

ACSR Moose conductor

AAC Tarantulla conductor

10.98mm dia GS earth wire

72.5 kV, 50 Amp. single phase horn gap fuse unit (Three phase)

Heat shrinkable tube / tape

52 KV XLPE Power Cable with all accessories

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

Cable Trays

PVC Wires

Mobile Flood Light Tower

CONTROL ROOM BUILDING AND STREET LIGHTING

Lighting transformers

Steel tubular poles with PVC wire JB , MCB, piller box complete cableling , panels etc complete in all respect

Elergy Efficent outdoor lights complete in all respect

Any other items ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

FIRE FIGHTING SYSTEM ( AS PER TECHNICAL SPECIFICATION)

Mulsifyre System

Diesel Engine driven pump set of 410 M3/hr capacity 70 M Head

(a) Diesel engine pump complete with accessories

(b) Foot valve with strainer 300 mm

(c) Stop valve 250 mm

(d) CIDF suction pipe 300 mm

(e) Fittings

(f) Diesel Engine Controller with VRLA Maintenance free Battery, SMPS charger complete

Electric Motor driven pump set of 410 M3/hr capacity 70 M Head

(a) Pump & motor complete with starter

(b) Foot valve with strainer 300 mm

(c) Stop valve 250 mm

(d) CIDF suction pipe 300 mm

(e) Fittings

Air Vessel size 300 mm dia 1500 mm long

Set of interconnecting pipes, stop valves for interconnecting in pump house building

(a) 250 mm dia Gate valve

(b) 250 mm dia Steel pipe

Mulsifyre Strainer

Automatic starter, Diesel Engine starting panel

Compressor with driving motor

G.I. piping with fittings

(a) G.I. pipe 25 mm dia

(b) Fittings for 25 mm dia pipe

M.S. pipes suitable for overgrond and under ground as per relevant BIS

(a) 250 mm dia pipe.

(b) Fittings for 250 mm dia pipe

(c) 200 mm dia pipe.

(d) Fitting for 200 mm dia pipe

(e) 150 mm dia pipe.

(f) Fittings for 150 mm dia pipe

(g) 100 mm dia pipe.

(h) Fittings for 100 mm dia pipe.

Set of Deluge valve stop valves, supports projectors, detectors with pipe, alarm motor and gang for the mulsifyre protection of shunt reactors.

(a) Mulsifyre projectors

(b) Quartzoid bulb Detectors

(c) 150 mm dia Deluge valve

(d) 250 mm dia Drain valve

(e) 150 mm dia GI pipe

(f) 100 mm dia GI Pipe

(g) 80 mm dia GI Pipe

(h) 50 mm dia GI Pipe

(i) Alarm Motor & Gonge

(j) D.A. Switches

Alarm & 32 section Annunciation panel for complete installation

LT distribution Panel suitable for 3 ½ x 300 sq. mm. incoming & 6 Nos. 3 ½ x185 / 95 Sqmm for 3 Phase outgoing feeders of capacity meeting the requirement of each motor

Set of Deluge valve stop valves, supports projectors, detectors with pipe, alarm motor and gang for the mulsifyre protection of shunt reactors.

Power Cables & Control Cables

(a) 3 ½ x 300 Sqmm FRLS Cable

(b) 3 ½ x 185 Sqmm FRLS Cable

(c) 3 ½ x 95 Sqmm FRLS Cable

(d) 3x30 sq. mm. FRLS cable

(e) Control cable (Copper)

(f) Earthing

Any other specified item for completion of Hydrant system ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note :- BOQ shown above is indicate only. It shall be finalized at the time of detail engineering as per the specification / requirement

Hydrant System

Electric Motor driven pump set of 410 M3/hr capacity 70 M Head

Electric pump motor & starter complete

Foot valve with strainer

Stop valve & size

CIDF suction pipe & size

Fittings

Pump & infeed piping with automatic priming arrangement

Jockey pump & starter complete set

GI suction pipe & size

Air vessel of 300 mmdia 1.5 metre long

Set of pipes & valves

Check valve & size

Gate valve & size

Steel pipe 7 size

Elbow & size

Electric Control Panel including switchgear & wiring for manual and automatic start / stop of pumps

Ring main with pipes and fittings

150mm dia CITJ pipe / MS pipe

Fittings of 150mm dia pipe

100 mm dia CITJ pipe / MS pipe

Fittings of 100mm dia pipe

Hydrant Female Oblique type with stand pipe

Single headed stand pipe

Double Headed stand pipe

Gun metal landing valve

150mm dia Isolator valves

63mm dia 15M long hose pipe

Hose cabinets

Branch pipe & jets

Fog type Nozzle

Note :- BOQ shown above is indicate only. It shall be finalized at the time of detail engineering as per the specification / requirement

FIRE DETECTION AND ALARM SYSTEM

Micro-processor based Main fire detection control panel wired for suitable number of zones complete with control unit P.S. system, built in a battery and battery charger

Addressable Photo Electronic light scattered smoke detectors

Addressable Photo Electronic light scattered smoke detectors with duct caging

Addressable lonization chamber smoke detector

Linear Heat sensor cable

Heat Detector

Electronic Hooters

FRLS Control cables

2x1.5 sq.mm

10x1.5 sq.mm

NOTE :- Quantities of each item shall be finalized during approval of detailed engineering for respective substations.

AIR-CONDITIONING AND VENTILATION SYSTEM WHICH SHALL INCLUDE FOLLOWING

Design, supply, installation, testing and commissioning of Air conditioning & ventilation system for the control room building for following rooms alongwith the necessary spares for satisfactory operation for 5 (five) years.

i) Control Room and OLTE / SAS Panel Room

ii SE / XEN Room

iii) Battery Room

iv) Rest Rooms etc.

Design, supply, installation, testing and commissioning of Air conditioning & ventilation system for all kiosks of bay level units in switchyard as per clause No. 4.3 of Section-II Vol-II (Air conditioning)alongwith the necessary spares for satisfactory operation for 5 (five) years.

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

Lignting Mast 24 m Height

Tower (400 kV) MKD TC

Tower (400 kV) MKD TH

Tower (400 kV) MKD TI

Tower (400 kV) MKD TJ

Tower (400 kV) MKD TM

Tower (400 kV) MKD TK

Tower (400 kV) MKD TG

Girder (400 kV) MKD G1

Girder (400 kV) MKD G2

220 kV tower type AT4

220 kV tower type AT8 (A6 With Peak)

220 kV tower type AT6 (Without Peak)

220 kV tower type AT1

220 kV Beam type AB1 / AB2

400 kV C.T. Support Structure

220 kV C.T. Support Structure

Pipe structures

400 kV CVT

220 kV CVT

400 kV Surge Arrestor

220 kV Surge Arrestor

400 kV Isolator

220 kV Isolator

400 kV Wave Trap

220kV Wave Trap

400 kV BPI

220 kV BPI

72.5 kV Isolator

42kV, 52 class Lightning arresters

36kV, 52 class EMVT (3 phase)

72.5 kV Horn gap fuse (3 phase)

72.5 kV Post insulators

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, Part-24 of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

Desktop Computer

Laser Printer

Filter Machine

Truck Mounted filter Machine (10 KL)

Solar panel system complete 100 KW

Solar panel system complete 100 KW with all necessary T&P. Cable, Meter, Structure etc.

ESHS Cost Schedule

Resources allocated to ESHS management

Drafting and updating the ESHS documentation, reporting, inspections

Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene

Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:

i) Accommodation

ii) Meals

iii) Transport

Training and local recruitment management costs

Protection of adjacent areas, biodiversity, prevention of erosion and wastewater management

Traffic, noise and atmospheric emissions management, land take

Waste and hazardous products management

Vegetation clearing and site rehabilitation

Filter Machine

Truck Mounted filter Machine (12 KL)

TRAINING CHARGES :- Training for substation automation system (For the courses as per scope of the specification).

Computer System Hardware

Computer System Software

Application Software

HANDHOLDING CHARGES

Lumpsum Charges for Handholding for 12 months from the date of Taking Over Certificate.

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

CIVIL WORKS

GEO TECHNICAL INVESTIGATION

Soil Investigation of substation / switchyard area as per technical specification.

FOUNDATIONS :

LATTICE / PIPE STRUCTURE

Lignting Mast 24 m Height

Tower (400 kV) MKD TC

Tower (400 kV) MKD TH

Tower (400 kV) MKD TI

Tower (400 kV) MKD TJ

Tower (400 kV) MKD TM

Tower (400 kV) MKD TK

Tower (400 kV) MKD TG

220 kV tower type AT4

220 kV tower type AT8 (A6 With Peak)

220 kV tower type AT6 (Without Peak)

220 kV tower type AT1

220 kV Beam type AB1 / AB2

400 kV C.T. Support Structure

220 kV C.T. Support Structure

220 kV C.T. Support Structure(metering)

400kV Circuit Breaker

220kV Circuit Breaker

Pipe structures

400 kV CVT

220 kV CVT

220 kV CVT(metering)

400 kV Surge Arrestor

220 kV Surge Arrestor

400 kV Isolator

220 kV Isolator

400 kV Wave Trap

220kV Wave Trap

400 kV BPI

220 kV BPI

72.5 kV Isolator

42kV, 52 class Lightning arresters

36kV, 52 class EMVT (3 phase)

72.5 kV Horn gap fuse (3 phase)

72.5 kV Post insulators

Marshalling Kiosk

Steel Tubular Poles

FOUNDATION FOR 500 MVA, 400/220/33 kV TRANSFORMER:-

FOUNDATION FOR 125 MVAR, 400 KV Bus Reactor:-

FOUNDATION FOR 50 MVAR, 400 KV Line Reactor:-

FOUNDATION FOR 25 MVAR, 220 KV Bus Reactor:-

Civil works for MS Tank including Excavation, Laying of 75 mm PCC, Constructing brick wall jacket around the tank, laying of 200 mm RCC raft, leveling and alignment of MS Tank, backfilling with excavated sand, Top leveling by laying of PCC, as per site requirement and Technical specifications (complete job). As per specification for 25 MVAR, 220 kV Bus Reactor

FOUNDATION FOR 33/0.415 kV, 800 kVA, LT three phase station transformer

FOUNDATION FOR 33/0.415 kV, 630 kVA, LT three phase station transformer

FOUNDATION / PLATEFORM FOR DG SET

CABLE TRENCH

Design, engineering and construction of R.C.C. cable trenches for required depths precast R.C.C. covers, water stops, brick works wherever required including the supply of labour, material, cement, reinforcement steel, steel angles, flats and providing P.C.C.(1:4:8) below cable trenches as per technical specification and approved drawings

Section B

Section C

Section D

Construction of RCC sump having capacity 10000 Liters with provision of automatic dewatering mud pump with disposal arrangement upto outside RVPN premises as directed by Engineeer In-charge with provision of a stand by pump.

CABLE TRENCH CROSSING

Design, engineering, construction including supply of labour, material, cement, reinforcement steel, form work etc. and all associated works for construction of cable trench crossings as per technical specification and approved drawings

Section B crossing road

Section C crossing road

TRENCHES for directly buried cables

ANTI WEED TREATMENT AND BASE LAYER OF PCC

Providing and supplying all labour material including borrowed / removal of earth for maintaining the FGL, equipments etc., soil sterilization / antiweed treatment including excavation, mixing / injecting chemicals to achieve the guaranteed effectiveness of treatment at least up to one year, rolling dressing, compacting the excavated earth within substation areas as per technical specification 100mm thick PCC (1:3:6) with 20 / 40mm graded aggregate as per technical specification.

Providing and supplying all labour, material including borrowed / removal of earth for maintaining the FGL, equipments etc., soil sterilization / antiweed treatment including excavation, mixing / injecting chemicals to achieve the guaranteed effectiveness of treatment at least up to one years, rolling dressing, compacting the excavated earth beyond the area of switchyard i.e. considered for future scope / work, laying of 150mm Crusher dust (residue of coarse aggregate) / Quarry Rubbish / Murram / any locally available Non cohesive material having anti weeding property as per technical specification.

JELLY SPREADING

a) After laying cement concrete (1:4:8) / brick edging in required slope / grade, 100mm thick layer of granite/basalt/trap jelly of 20mm size shall be spread over the entire switchyard area as per drawing and directions of engineer incharge of the work. The 20 mm nominal size shall pass 100% through IS. Sieve designation 40 mm and nothing through 16.00 mm IS Sieve. The whole switchyard area (excluding buildings pathway road, drainages, cable trenches, equipments/ structures plinths etc.) shall be covered with jelly spreading. The jelly used shall be free from dirt, organic materials and flakes.

b) Barricades shall be provided to confine Jelly Spreading which include construction of solid concrete block masonry in CM (1:6) with cement concrete solid blocks of proportion (1:5:3) crushing strength not less than 50 Kg. per Sq.cm / 40x40x20 cms. Size (l, b, h) conforming to IS 32185-196) including necessary curing etc. complete. The concrete block shall be 100 mm above gravel top. The exposed surface of barricades shall be plastered with 12 mm thick in CM (1:6) & two coat of water proof cement paint.

ROAD WORK

Design and construction of roads and walkways/shoulders within sub-station or outside the station as per specification, layout, sectional detail drawing and directions of Engineer-in-charge of work etc. complete in all respect.

a) 5.0 Mtr. Wide Road

a) 3.75 Mtr. Wide Road

STORM DRAINAGE SYSTEM

Design, construction if storm water drainage scheme including road, culverts, crossing of drains with cable trenches, sump pits etc. as per specification including outlet sump pit with provision of low head high discharge automatic pump.

FIRE WALL

Design, engineering, supply of labour, material including all associated works for construction of fire protection wall as per technical specification.

RAIN WATER HARVESTING

This is a lump sum item. The contractor shall be required to complete the work in all respect as per drawings furnished by the bidder and approved by the owner. All the items including excavation, miscellaneous steel, RCC, reinforcement , bore well, brick work, filling of boulders, gravel, sand, pipes etc. shall be deemed to be included in this lump sum rate.

CONTROL ROOM BUILDING

Construction of control room building as per drawing and specification including internal electricafication with Energy Efficient Light , Tube light fixtures etc, 15 lit storage geyser earthing, sanitary system including septic tank, soakage pit and rain water harvesting system as per drawing approved by owner/GWD etc., water supply system including making connection with distribution system, false ceiling (In Hall and PLCC room) fans,water cooler of cooling capacity 80 lit/hour and storage capacity of 120 lit, RO system withpurification capacity of 25 lit/hour and duty cycle of 170-250 lit/day with PVC tank of 200 lit capacity, internal cable trenches covered with 6 mm thick MS chequred plates, plinth protection works with chequred tiles etc.

BAY LEVEL KIOSK BUILDING (S) : Design & construction as per drawing and specification

400kV level

220kV level

FIRE FIGHTING PUMP HOUSE BUILDING

Design, Engineering and construction of fire fighting pump house including pump foundation, cable trench, water reservior etc.

WATER SUPPLY :-Supply and installation of water supply system with construction of GLR, subersible cable, fire fighting pump room including pump foundationn, required electrifcations cables from control room and panels, providing and laying GI pipe line from from GLR to control room, yard, guard room, for plantation etc including making connection , landscaping & plantation as per specification approved drawings and directions of engineer incharge

SEWERAGE SYSTEM :- Providing internal & external sewerage system for the control room building, septic tank etc. in the S/S as per Technical Specification

Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS:2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe : Work also includes Supplying and installation of submersible pumping motor pump sets I.S.I. Marked (IS : 8034-1989 ) and one stand bye pump of approved make like K.S.B., KIRLOSKAR, Calama etc. or equivalent, making connection suitable for T.W.. The job includes supplying and welding of flanges on G.I. riser pipes, pipe line of required dia up to GLR, Required cables from controm to panel and submersible pump, installation of complete fitting and accessories, with riser pipes, jointing of electrical cables and other connections making switch board electrical connections, panels etc as per disign and specifcation , all labour for testing of submersible pump set and supply of water to water mains, complete in all respect as diredted by engineer incharge. . Note: Tubewell shall be constructed as per fisibility report received from hydrogeologist/ collector

Providing and fixing cow catcher made of R.S. joist angles, channels MS round bars, MS flats etc including cutting welding and fabrication with priming coat of red oxide (as per design). The work includes construction of RR stone masonry wall of required section up to 90 cm below cow catcher, RCC bed plate of 20 cm thickness,cement plaster, PCC 1:4::8 in 15 cm thickness etc. complete as per approved design and specification. length of cow catcher should cover the entry gate and wicket gate with pillars

OTHER CIVIL WORKS

Security room

Vehicle parking shed (Four wheeler / two wheeler)

Store Shed with open platform

Retaining Wall for FG Level-1

Retaining Wall for FG Level-2(if required)

Any other specified work (If amount Quoted, list of items alongwith quantity be indicated in technical offer)

Description of Work / Item(s)

Amount

MAIN MATERIAL/ ITEMS

245 kV, 2000 Amp., 50 kA rupturing capacity circuit Breaker suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

Current Transformer

1000/1-1-1-1-1 Amp. 50 kA, 245 kV single phase multi core current transformers (Live Tank Type only)

Terminal Connectors for above item

Capacitive Voltage Transformer

245 kV single phase 4400 pF CVT suitable for high frequency (HF) coupling required for power line communication with voltage ratio 220/0.11 kV and three secondary windings.

Terminal Connectors for above item

Isolator

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp. , 50 kA triple pole, gang operated horizontal double break type motor operated, outdoor Isolator metallic with double earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic for tandem operation complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 198 kV lightning arresters suitable for connection between phase and ground on 3 phase 245 kV neutral grounded system complete with insulating base, surge counter and current meter, accessories.

Terminal Connectors for above item

Wave Trap

220 kV, 0.5 mH / 3150 A Wave traps with tuning unit protection device, terminals clamps, corona rings, bird barriers etc. Including remote end.

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

220 kV Control and relay Panel for Feeder

PLCC EQIPMENTS

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

VFT equipment (Modem) suitable for transmission of Data through PLCC links based on frequency shift keying modulation techniques programmable for both baud rate from 50 Baud to 2400 Baud and center frequency through switches or jumpers (A.F. Shift Channel)

HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.

Any other item bidder may require to complete the PLCC system as per the specification requirement (if amount quoted, list of items , list of items alongwith quantity be indicated in technical offer)

FOTE TERMINAL EQUIPMENTS

Fully wired cabinet with base 19” equipment rack (incl. front cover, cable tray, common cards) with fan unit and control, synchronization, Alarm, dual Power supply input cables

Central Processing Card – CPU

Power supply unit – 48 VDC 85 W

OLTE – 4 Port STM-1 (155 Mbps Card) along with SFPs

Optical Amplifier / Booster equipment (comprising of wave length translator, Wavelength Converter, Booster Amplifier; 21 dBm, Pre Amplifier and Raman Amplifier + Software) for main as well as protected parts

OFC Patch Cords (Set of 48 nos.)

8 Port 2w/4w E&M interface Card

4 port Data Interface Card (Programmable)

4 Port Data interface Card (Programmable) for remote end (to be located at nearest SLDC / Sub-LDC)

Ethernet over SDH transport card (with four 10/100 base, one 100Base – FX and one 1000 Base-LX/SX front interfaces)

4 command integrated Tele-protection Card

Engineering Order Wire Phone

Optical Fibre Distribution Panel (for 48 fibre) with spleing and patch parul

HDPE Duct Pipe for OPGW

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

Single Tension hardware for single Zebra (Bolted type)

Single Suspension hardware for single Zebra (Bolted type)

Disc Insulator 120 KN

Disc Insulator 70 KN

T-Clamps (Bolted Type) for Earth wire

PI Clamps for zebra

PG Clamps (Bolted Type) for Zebra to Zebra

T Clamps for Zebra to Zebra

PG Clamps for Earthwire

a) 245 kV Bus Post Insulators other than those not included with individual equipment.

Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories

EARTHING MATERIAL (GS & MS flats of all sizes and Cu/Al Flexible braids)

M.S. Round 28 mm dia

M.S. Flat 50x12 mm

M.S. Channel 100x 50x6 mm

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

Marshalling Kiosk

b) For 220 kV

Cables (FRLS)

18 core x 2.5 sq mm

12 core x 2.5 sq mm

4 core x 2.5 sq mm

4 core x 4 sq mm

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

ACSR Zebra conductor

GS earth wire

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

22OKV.AT1 STRUCTURE

22OKV.AB1 BEAM

220 kV C.T. Support Structure

220 kV CVT

220 kV Surge Arrestor

220 kV Isolator

220 kV Isolator(tendum)

220kV Wave Trap

220 kV BPI

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Service+ETC

245 kV, 2000 Amp., 50 kA rupturing capacity circuit Breaker suitable for single and three phase rapid auto reclosing complete with mounting structures, foundation bolts and nuts and first filling of SF6 gas plus 20% spare gas including accessories and auxiliaries.

Terminal Connectors for above item

Current Transformer

1000/1-1-1-1-1 Amp. 50 kA, 245 kV single phase multi core current transformers (Live Tank Type only)

Terminal Connectors for above item

Capacitive Voltage Transformer

245 kV single phase 4400 pF CVT suitable for high frequency (HF) coupling required for power line communication with voltage ratio 220/0.11 kV and three secondary windings.

Terminal Connectors for above item

Isolator

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp. , 50 kA triple pole, gang operated horizontal double break type motor operated, outdoor Isolator metallic with double earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

245 kV 2000 Amp., 50 kA triple pole, gang operated Horizontal Double break type, motor operated, outdoor, Isolator metallic for tandem operation complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 198 kV lightning arresters suitable for connection between phase and ground on 3 phase 245 kV neutral grounded system complete with insulating base, surge counter and current meter, accessories.

Terminal Connectors for above item

Wave Trap

220 kV, 0.5 mH / 3150 A Wave traps with tuning unit protection device, terminals clamps, corona rings, bird barriers etc. Including remote end.

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

220 kV Control and relay Panel for Feeder

PLCC EQIPMENTS

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

VFT equipment (Modem) suitable for transmission of Data through PLCC links based on frequency shift keying modulation techniques programmable for both baud rate from 50 Baud to 2400 Baud and center frequency through switches or jumpers (A.F. Shift Channel)

HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.

Any other item bidder may require to complete the PLCC system as per the specification requirement (if amount quoted, list of items , list of items alongwith quantity be indicated in technical offer)

FOTE TERMINAL EQUIPMENTS

Fully wired cabinet with base 19” equipment rack (incl. front cover, cable tray, common cards) with fan unit and control, synchronization, Alarm, dual Power supply input cables

Central Processing Card – CPU

Power supply unit – 48 VDC 85 W

OLTE – 4 Port STM-1 (155 Mbps Card) along with SFPs

Optical Amplifier / Booster equipment (comprising of wave length translator, Wavelength Converter, Booster Amplifier; 21 dBm, Pre Amplifier and Raman Amplifier + Software) for main as well as protected parts

OFC Patch Cords (Set of 48 nos.)

8 Port 2w/4w E&M interface Card

4 port Data Interface Card (Programmable)

4 Port Data interface Card (Programmable) for remote end (to be located at nearest SLDC / Sub-LDC)

Ethernet over SDH transport card (with four 10/100 base, one 100Base – FX and one 1000 Base-LX/SX front interfaces)

4 command integrated Tele-protection Card

Engineering Order Wire Phone

Optical Fibre Distribution Panel (for 48 fibre) with spleing and patch parul

HDPE Duct Pipe for OPGW

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

Single Tension hardware for single Zebra (Bolted type)

Single Suspension hardware for single Zebra (Bolted type)

Disc Insulator 120 KN

Disc Insulator 70 KN

T-Clamps (Bolted Type) for Earth wire

PI Clamps for zebra

PG Clamps (Bolted Type) for Zebra to Zebra

T Clamps for Zebra to Zebra

PG Clamps for Earthwire

a) 245 kV Bus Post Insulators other than those not included with individual equipment.

Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories

EARTHING MATERIAL (GS & MS flats of all sizes and Cu/Al Flexible braids)

M.S. Round 28 mm dia

M.S. Flat 50x12 mm

M.S. Channel 100x 50x6 mm

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

Marshalling Kiosk

b) For 220 kV

Cables (FRLS)

18 core x 2.5 sq mm

12 core x 2.5 sq mm

4 core x 2.5 sq mm

4 core x 4 sq mm

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

ACSR Zebra conductor

GS earth wire

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

22OKV.AT1 STRUCTURE

22OKV.AB1 BEAM

220 kV C.T. Support Structure

220 kV CVT

220 kV Surge Arrestor

220 kV Isolator

220 kV Isolator(tendum)

220kV Wave Trap

220 kV BPI

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

ESHS Cost Schedule

Resources allocated to ESHS management

Drafting and updating the ESHS documentation, reporting, inspections

Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene

Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:

i) Accommodation

ii) Meals

iii) Transport

Training and local recruitment management costs

Protection of adjacent areas, biodiversity, prevention of erosion and wastewater management

Traffic, noise and atmospheric emissions management, land take

Waste and hazardous products management

Vegetation clearing and site rehabilitation

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

CIVIL WORKS

FOUNDATIONS :

LATTICE / PIPE STRUCTURE

220 kV tower type AT1

220 kV C.T. Support Structure

220kV Circuit Breaker

220 kV CVT

220 kV Surge Arrestor

220 kV Isolator

220 kV Isolator (tendum)

220kV Wave Trap

220 kV BPI

Marshalling Kiosk

CABLE TRENCH

Section C

CABLE TRENCH CROSSING

Design, engineering, construction including supply of labour, material, cement, reinforcement steel, form work etc. and all associated works for construction of cable trench crossings as per technical specification and approved drawings

Section C crossing road

ANTI WEED TREATMENT AND BASE LAYER OF PCC

Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001

JELLY SPREADING (Gravelling)

Providing and laying 100mm thick layer of granite/basalt/trap jelly(gravel) of 40mm single size shall be spread over the entire switchyard area as per drawing and directions of engineer incharge of the work. The whole switchyard area (excluding buildings pathway road, drainages, cable trenches, equipments/ structures plinths etc.) shall be covered with jelly spreading. The jelly used shall be free from dirt, organic materials and flakes.

Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete for 300 mm dia internal dia pipe including Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design and Excavating trenches of required width for pipes cables etc. including excavation for sockets, depth up to required depth including taking out the excavated materials, refilling the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, with all lead and lifts in all types of soil, rocks etc complete in all respect.

Any other specified work (If amount Quoted, list of items alongwith quantity be indicated in technical offer)

Description of Work / Item(s)

Amount

MAIN MATERIAL/ ITEMS

145 kV, 1250 Amp. 40 kA rupturing capacity circuit breaker complete with mounting structures, foundation bolts, nuts and first filling of SF-6 gas plus 20% spare gas including accessories and auxiliaries

Terminal Connectors for above item

Current Transformer

500/1-1-1 Amp. 145 kV single phase multi core current transformers. (Live Tank Type only)

Terminal Connectors for above item

Capacitive Voltage Transformer

145 kV single phase 4400 pF CVT suitable for carrier coupling voltage ratio 132/0.11 Kv (3 Core)

Terminal Connectors for above item

Isolator

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 120 kV lightning arresters suitable for connection between phase and ground on 3 phase 145 kV neutral grounded system complete with insulating base, surge counter and current meter, and all accessories as per specification.

Terminal Connectors for above item

Wave Trap

132 kV, 0.2 mH / 1000 A Wave traps with tuning unit protection device, terminals clamps and accessories etc. Including remote end,

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

132 kV Feeder C&R Panel for feeder (J-II) 1A,110V DC

PLCC EQIPMENTS

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

VFT equipment (Modem) suitable for transmission of Data through PLCC links based on frequency shift keying modulation techniques programmable for both baud rate from 50 Baud to 2400 Baud and center frequency through switches or jumpers (A.F. Shift Channel)

HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.

Any other item bidder may require to complete the PLCC system as per the specification requirement (if amount quoted, list of items , list of items alongwith quantity be indicated in technical offer)

FOTE TERMINAL EQUIPMENTS

Fully wired cabinet with base 19” equipment rack (incl. front cover, cable tray, common cards) with fan unit and control, synchronization, Alarm, dual Power supply input cables

Central Processing Card – CPU

Power supply unit – 48 VDC 85 W

OLTE – 4 Port STM-1 (155 Mbps Card) along with SFPs

OFC Patch Cords (Set of 48 nos.)

8 Port 2w/4w E&M interface Card

4 port Data Interface Card (Programmable)

4 Port Data interface Card (Programmable) for remote end (to be located at nearest SLDC / Sub-LDC)

Ethernet over SDH transport card (with four 10/100 base, one 100Base – FX and one 1000 Base-LX/SX front interfaces)

4 command integrated Tele-protection Card

Engineering Order Wire Phone

Optical Fibre Distribution Panel (for 48 fibre) with spleing and patch parul

HDPE Duct Pipe for OPGW

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

Single Tension hardware for single Panther (Bolted type)

Single Suspension hardware for single Panther (Bolted type)

Disc Insulator 120 KN

Disc Insulator 70 KN

T CLAMP (Z to Z)

T CLAMP (Z to P)

T CLAMP (P to P)

PG CLAMP(Z to Z)

PG CLAMP(Z to P)

PG CLAMP(P to P)

132 kV Outdoor Post Insulators other than those not included with individual equipment.

Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories

EARTHING MATERIAL (GS & MS flats of all sizes and Cu/Al Flexible braids)

M.S. Round 28 mm dia

M.S. Flat 50x10 mm

M.S. Channel 100x 50x6 mm

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

Marshalling Kiosk

For 132 kV (200 Way Stud type)

Cables (FRLS)

18 core x 2.5 sq mm

12 core x 2.5 sq mm

4 core x 2.5 sq mm

4 core x 4 sq mm

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

ACSR Zebra conductor

ACSR Panther conductor

GS earth wire

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

132kV C.T. Support Structure

132 kV CVT

132kV Surge Arrestor

132 kV Isolator

132 kV BPI

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Service + ETC

145 kV, 1250 Amp. 40 kA rupturing capacity circuit breaker complete with mounting structures, foundation bolts, nuts and first filling of SF-6 gas plus 20% spare gas including accessories and auxiliaries

Terminal Connectors for above item

Current Transformer

500/1-1-1 Amp. 145 kV single phase multi core current transformers. (Live Tank Type only)

Terminal Connectors for above item

Capacitive Voltage Transformer

145 kV single phase 4400 pF CVT suitable for carrier coupling voltage ratio 132/0.11 Kv (3 Core)

Terminal Connectors for above item

Isolator

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic without earth blade complete with all accessories.

Terminal Connectors for above item

Post insulators for above item

145 kV 1250 Amp. triple pole, gang operated Horizontal Double break type, outdoor, Isolator metallic fitted with single earth blade complete with accessories.

Terminal Connectors for above item

Post insulators for above item

Surge Arresters

Single pole voltage -coordinated, outdoor station class heavy duty current limiting type 120 kV lightning arresters suitable for connection between phase and ground on 3 phase 145 kV neutral grounded system complete with insulating base, surge counter and current meter, and all accessories as per specification.

Terminal Connectors for above item

Wave Trap

132 kV, 0.2 mH / 1000 A Wave traps with tuning unit protection device, terminals clamps and accessories etc. Including remote end,

CONTROL, RELAY & PROTECTION PANELS & ASSOCIATED MANDATORY SPARES/EQUIPMENTS

132 kV Feeder C&R Panel for feeder (J-II) 1A,110V DC

PLCC EQIPMENTS

4 Channel, Digital PLCC Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.

Digital Protection coupler microprocessor based suitable for Four commands.

Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.

VFT equipment (Modem) suitable for transmission of Data through PLCC links based on frequency shift keying modulation techniques programmable for both baud rate from 50 Baud to 2400 Baud and center frequency through switches or jumpers (A.F. Shift Channel)

HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.

Any other item bidder may require to complete the PLCC system as per the specification requirement (if amount quoted, list of items , list of items alongwith quantity be indicated in technical offer)

FOTE TERMINAL EQUIPMENTS

Fully wired cabinet with base 19” equipment rack (incl. front cover, cable tray, common cards) with fan unit and control, synchronization, Alarm, dual Power supply input cables

Central Processing Card – CPU

Power supply unit – 48 VDC 85 W

OLTE – 4 Port STM-1 (155 Mbps Card) along with SFPs

OFC Patch Cords (Set of 48 nos.)

8 Port 2w/4w E&M interface Card

4 port Data Interface Card (Programmable)

4 Port Data interface Card (Programmable) for remote end (to be located at nearest SLDC / Sub-LDC)

Ethernet over SDH transport card (with four 10/100 base, one 100Base – FX and one 1000 Base-LX/SX front interfaces)

4 command integrated Tele-protection Card

Engineering Order Wire Phone

Optical Fibre Distribution Panel (for 48 fibre) with spleing and patch parul

HDPE Duct Pipe for OPGW

HARDWARES AND MECHANICAL/ELECTRICAL AUXILIARIES

Single Tension hardware for single Panther (Bolted type)

Single Suspension hardware for single Panther (Bolted type)

Disc Insulator 120 KN

Disc Insulator 70 KN

T CLAMP (Z to Z)

T CLAMP (Z to P)

T CLAMP (P to P)

PG CLAMP(Z to Z)

PG CLAMP(Z to P)

PG CLAMP(P to P)

132 kV Outdoor Post Insulators other than those not included with individual equipment.

Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories

EARTHING MATERIAL (GS & MS flats of all sizes and Cu/Al Flexible braids)

M.S. Round 28 mm dia

M.S. Flat 50x10 mm

M.S. Channel 100x 50x6 mm

Note:- (i) The GS/MS flats to be used for earthing of the equipment shall be required to be drilled/welded at site as per the needs and M.S. Flats shall be properly painted as per the stipulations. Supply of necessary bolts, nuts & washers shall also be in the scope of the contractor. (ii) All the dropped jumpers shall be of Y-type.

Marshalling Kiosk

For 132 kV (200 Way Stud type)

Cables (FRLS)

18 core x 2.5 sq mm

12 core x 2.5 sq mm

4 core x 2.5 sq mm

4 core x 4 sq mm

Double compression type cable gland for 1.1 kV grade insulated cables & its termination as per cable sizes.

Crimping type cable lugs (Tinned copper) of size of cable as required.

PVC Pipes for Laying cables as per IS 4985 (the sizes shall be recommended by the bidder)

ACSR Zebra conductor

ACSR Panther conductor

GS earth wire

Any Other Item ( If amount quoted, list if items alongwith quantity be indicated in Technical offer)

Note:- Bidder shall supply 5% of the erected quantities of above Bus Bar Material, clamp connector, spacers and accessories as spare . Any fractions will mean the next higher integer number.

IllUMINATION SYSTEM :

Switchyard Flood Lighting

Flood Light Luminaries

Energy Efficent flood light complete in all respect

Distribution pillars

STRUCTURES : Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure. Conforming to IS:2062 and GI pipe conforming to grade YST 22 or higher grade as per IS:806.

LATTICE STRUCTURE

132kV C.T. Support Structure

132 kV CVT

132kV Surge Arrestor

132 kV Isolator

132 kV BPI

Note:- (1)The above estimated quantities of structures are only for tender purpose. The contractor shall supply, erect & commission the structures to meet out complete requirement for successful commissioning , maintenance & operation of the substation in accordance with the specification. (2) Details of Tower structures & girders / beams available in Vol.II, of specification are tentative and for tender purpose only. The bidder shall have to design the structures & girders / beams based on actual loadings on the basis of short circuit force calculations, if required.

ESHS Cost Schedule

Resources allocated to ESHS management

Drafting and updating the ESHS documentation, reporting, inspections

Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene

Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:

i) Accommodation

ii) Meals

iii) Transport

Training and local recruitment management costs

Protection of adjacent areas, biodiversity, prevention of erosion and wastewater management

Traffic, noise and atmospheric emissions management, land take

Waste and hazardous products management

Vegetation clearing and site rehabilitation

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

CIVIL WORKS

FOUNDATIONS :

LATTICE / PIPE STRUCTURE

132kV C.T. Support Structure

132 kV CVT

132kV Surge Arrestor

132 kV Isolator

132 kV BPI

132 kV Circuit Breaker

Marshalling Kiosk

CABLE TRENCH

Section C

CABLE TRENCH CROSSING

Design, engineering, construction including supply of labour, material, cement, reinforcement steel, form work etc. and all associated works for construction of cable trench crossings as per technical specification and approved drawings

Section C crossing road

ANTI WEED TREATMENT AND BASE LAYER OF PCC

Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001

JELLY SPREADING (Gravelling)

Providing and laying 100mm thick layer of granite/basalt/trap jelly(gravel) of 40mm single size shall be spread over the entire switchyard area as per drawing and directions of engineer incharge of the work. The whole switchyard area (excluding buildings pathway road, drainages, cable trenches, equipments/ structures plinths etc.) shall be covered with jelly spreading. The jelly used shall be free from dirt, organic materials and flakes.

Supply & Fixing Barricades to confine Jelly (gravel), which include Supply and fixing cement concrete solid blocks of size 30x15x30 cms (l, b, h) jointed with CM 1:4, made from precast M-20 concrete and laid over 100 mm thick base of PCC 1:4:8 including necessary curing etc. complete. The top of concrete block shall be 100 mm above gravel top with provision of suatable openings for drainage of rain water. The exposed surface of barricades shall be applied with two coat of water proof cement paint.

Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete for 300 mm dia internal dia pipe including Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design and Excavating trenches of required width for pipes cables etc. including excavation for sockets, depth up to required depth including taking out the excavated materials, refilling the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, with all lead and lifts in all types of soil, rocks etc complete in all respect.

Any other specified work (If amount Quoted, list of items alongwith quantity be indicated in technical offer)

Kanohar Electricals Limited (BID ID -3053919)

Kanohar Electricals Limited (BID ID -3053919)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -3054323)

Kanohar Electricals Limited (BID ID -3053919)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -3054323)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -3054323)

Kanohar Electricals Limited (BID ID -3053919)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -3054323)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -3054323)

Kanohar Electricals Limited (BID ID -3053919)

Kanohar Electricals Limited (BID ID -3053919)

Kanohar Electricals Limited (BID ID -3053919)