Civil Works for upgrading 3 no. 33 kV bays to 66 kV bays at 132 kV S/S Phagwara

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation

Dismantaling of Brickwork

Dismantling Concrete 1:2:4

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centring and shuttering for columns (Square or rectangular or poly gonal in plain)

Cement Concrete 1:6:12 with stone ballast 40mm gauge stone aggregates using concrete mixer volumetric type

Cement Concrete 1:5:10 with stone ballast 40mm gauge stone aggregates using concrete mixer volumetric type

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

Preparation of surface

Extra for vibrator used by the contractor at his own cost.

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

First class burnt brick work laid in cement sand mortor 1:4 in first storey upto 4 metres above plinth level.

115 mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth.

Conglomerate floor 25mm thick cement concrete topping 1:2:4.(Using mechanical mixer for mixing of material)

Conglomerate floor 50mm thick cement concrete topping 1:2:4.(Using mechanical mixer for mixing of material)

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:5

20mm thick cement plaster 1:4 in two coat work

Applying priming coat with metal primer on new steel or iron work including preparation of surface.(With special quality paint)

Painting two coats with aluminium paint to give an even shade excluding priming coat (With special quality paint)

Mild steel reinforcement for RCC work where not included in the complete rate of RCC including bending, binding and placing in position complete in all respects-Above 20mm dia bars

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Welding by gas or by electric plant, including carriage to and from workshop.

Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above- From 0 to 15m

Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above- Exceeding 15m but upto 30m

Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above- Exceeding 30m

Fixing of templates along with bolts as per drawing

Supply, hoisting & placing of ferro cement trench covers, frames of size given below made of MS Flat 50x3 mm with 6 mm dia bars at 4.5" and 9" welded to flat with lifting hook as per Drg No. CW/DS2537 R5 AND cs/ds2420 R3 Complete of ferro cement trench covers of various sizes:- T3 - type (2'-2"x2"-2")

Supply, hoisting & placing of ferro cement trench covers, frames of size given below made of MS Flat 50x3 mm with 6 mm dia bars at 4.5" and 9" welded to flat with lifting hook as per Drg No. CW/DS2537 R5 AND cs/ds2420 R3 Complete of ferro cement trench covers of various sizes:- T4 - type (1'-9" x 2'-6")

Providing and fixing MS Angle iron posts

Providing and Fixing of cable Racks

Providing and fixing MS Angle iron nosing made out of 50x50x3 angle iron with hold fast complete in all respects

P/F barbed wire complete in 4 rows in all respects as per drawing

P/F wire netting mesh complete in all respects 1.80 mt high

Disposal of surplus earth/debris

Spreading of gravel

Extra for Carriage of Course sand & crusher , Stone Ballast & Stone Metal

Extra for Carriage of Fine sand

Extra for Carriage of Cement from Jamsher Store

Extra for Carriage of Steel from Jamsher Store

Difference of rates of material - Crushed Bajri 13.2mm

Difference of rates of material - Crushed Bajri 11.2mm

Difference of rates of material - Coarse Sand

Difference of rates of material - Stone Metal 40/20mm

Difference of rates of material - Bricks (Distt. Nawashahr)

Mahesh Kohli Goverment Contractor

INDO ENGINEERING WORKS