Urgent Re Construction of existing 6.0mts span culvert at Amaiwada in VP Virnoda in Pernem Constituency of Pernem Taluka.

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.

Earthwork in excavation of foundation of structures of culverts, abutments, piers, retaining walls etc., as per drawing and technical specification, in all types of strata comprising of any types of matarials such as soil, silt, sand, clay, gravel, murrum of all varieties, shingles, pebbles all types of conglomerates, laterite rocks, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rock or weathered rock and all such other materials as described under appendix “A” to these specification either in full or in parts as the case may be adopting mechanical means (hydraulic excavator) or any approved method or methods as the case may be convenient or permitted inclusive of blasting chiseling, wedging etc. in all condition such as dry, moist, saturated, submerged, foul condition etc including setting out, construction of shoring and bracing removal of stumps and other deleterious matter, dressing of sides, ramming of bottom getting out the excavated soil/rock to be leveled and neatly dressed pumping and bailing out of water, back filling the excavated earth to the extent required and utilizing the remaining earth locally for road work, barricading, danger lighting, guarding and disposal of excavated earth as directed by the Engineer-in-charge- all complete including all leads and lifts and upto depth of excavation as per MORTH Specification 304..

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a) All works upto plinth

b) In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.

Reinforced cement concrete work (1:1½:3) (1 cement:1½ coarse sand: 3 graded granitic or basaltic aggreate 20mm nominal size)in suspended floors, roofs, landings, shelves and their supports and balconies upto floor five level including finishing and plastering the ceiling with C.M. (1:3) (1 cement: 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding the cost of centering and shuttering.

Centering and shuttering including struttings propping etc. and removal of formwork for: a)Foundations footings bases for columns and mass concrete.

ii)Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like…

Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth..

xiii)Suspended floors, roofs landings, shelves & their supports..

Providing High yield strength steel reinforcement bar (HYSD) / TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge B) 75 mm dia

Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .

Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels, grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513.

Please Enable Macros to View BoQ information