REPAIR TO WOODEN FURNITURE LIKE CHANGE OF UNSERVICEABLE FRAMES, PLYWOOD, PRELAMINATED PARTICLE BOARD, TABLE TOP AND RECANNING OF CHAIRS INCLUDING POLISHING ETC AT ARMY AREA COIMBATORE AND MADUKKARAI UNDER GE WELLINGTON

Amount

TABLE 900X600X760 MM WITH DARAWER WOODEN (FD - 283) FD-283 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table 900x600x760 mm with drawer all as per drg and as directed.

FD-283 : M&L removing unserviceable top of Table 900x600x760 mm with drawer and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed.

FD-283 : M/L for removing but unservicable rubber/PVC bush from Table wooden 900 x 600 x 760 with drawer and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

FD-283 : Taking out broken Stiffener of Table wooden 900 x 600 x 760 with drawer and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-283 : Taking out broken Leg of Table wooden 900 x 600 x 760 with drawer and supply and fixing new Leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-283 : Taking out broken Front rail of Table wooden 900 x 600 x 760 with drawer and supply and fixing new Front rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-283 : Taking out broken Side rail of Table wooden 900 x 600 x 760 with drawer and supply and fixing new Side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

TABLE 900X600X760 MM WITH OUT DARAWER WOODEN (FD-284) FD-284 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table 900x600x760 mm with out drawer all as per drg and as directed.

FD-284 : M&L removing unserviceable top of Table 900x600x760 mm with out drawer and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-284: M/L for removing but unservicable rubber/PVC bush from Table wooden 900 x 600 x 760 with out drawer and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

FD-284 : Taking out broken Stiffener of Table wooden 900 x 600 x 760 without drawer and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-284 : Taking out broken Leg of Table wooden 900 x 600 x 760 without drawer and supply and fixing new Leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-284 : Taking out broken Front rail of Table wooden 900 x 600 x 760 without drawer and supply and fixing new Front rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-284 : Taking out broken Side rail of Table wooden 900 x 600 x 760 without drawer and supply and fixing new Side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

TABLE DINING 8 PERS (FD-376/239) FD-376/239 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dining 8 pers all as per drg and as directed.

FD-376/239 : M&L removing unserviceable top of Table dining 8 pers and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-376/239 : Taking out broken stiffener of Table dining 8 pers and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-376/239 : Taking out broken Leg of Table dining 8 pers and supply and fixing new Leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

TABLE CENTRE (FD - 274) FD-274: M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table Centre all as per drg and as directed.

FD-274 : M&L removing unserviceable top of Table Centre and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-274 : Taking out broken legs of Table Centre and supply and fixing new leg of required size made out of well seasoned 1st class teak wood without damageing to other parts, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-274 : Taking out broken Front rail of Table Centre and supply and fixing new leg of required size made out of well seasoned 1st class teak wood without damageing to other parts, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-274 : Taking out broken Side rail of Table Centre and supply and fixing new leg of required size made out of well seasoned 1st class teak wood without damageing to other parts, all as per drawing & as specified and directed by the Engr-in-Charge.

TEAPOY (FD-278/232/382) FD-278, FD-382, FD-232 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Teapoy all as per drg and as directed.

FD-278, FD-382, FD-232 : M&L removing unserviceable top of Teapoy and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-278, FD-382, FD-232 : Taking out broken legs of Teapoy and supply and fixing new leg of required size made out of well seasoned 1st class teak wood without damageing to other parts, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-278, FD-382, FD-232 : M & L for replacement of damaged Front rail of Teapoy with well seasoned 1st class teakwood, all as per drawing & as specified and directed by the Engr-in-Charge Including taking out old front rail without damageing other part of the Teapoy.

FD-278, FD-382, FD-232 : M & L for replacement of damaged Side rail of Teapoy with well seasoned 1st class teakwood, all as per drawing & as specified and directed by the Engr-in-Charge Including taking out old front rail without damageing other part of the Teapoy.

FD-278, FD-382, FD-232 : M & L for replacement of damaged Stiffener of Teapoy with well seasoned 1st class teakwood, all as per drawing & as specified and directed by the Engr-in-Charge Including taking out old front rail without damageing other part of the Teapoy.

CHAIR WRITING (FD-280) FD-280 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Writing all as per drg and as directed.

FD-280 : TTaking down old worn out Plastic Cane from Chair Writing and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round plastic cane. Canning shall be done with Godrej pattern. All as per drg or as directed by Engr-in-Charge. (Make : AJAY/PREMIER)

FD-280 : M & L for Repairs to Chair writing by taking down the existing broken/unserviceable wooden front leg and replacing the same with new front leg made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-280 : M & L for Repairs to Chair writing by taking down the existing broken/unserviceable wooden Rear leg and replacing the same with new Rear leg made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-280 : M & L for Repairs to Chair writing by taking down the existing broken/unserviceable wooden Back rest and replacing the same with new Back rest made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-280 :M & L for Repairs to Chair writing by taking down the existing broken/unserviceable wooden Side rail and replacing the same with new Side rail made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-280 : M & L for Repairs to Chair writing by taking down the existing broken/unserviceable wooden Stiffener and replacing the same with new Stiffener made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.ected by Engr-in-Charge. (Make : AJAY/PREMIER)

CHAIR CB OFFICE (DB - 4124) DB-4124 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair CB Office all as per drg and as directed.

DB - 4124 : M & L for replacement of old damaged front leg of Chair CB office wooden with well seasoned first class teak wood complete all as shown on drawing and as specified and directed.

DB - 4124 : M & L for replacement of old damaged Rear leg of Chair CB office wooden with well seasoned first class teak wood complete all as shown on drawing and as specified and directed.

DB - 4124 : M & L for replacement of old damaged Back rest of Chair CB office wooden with well seasoned first class teak wood complete all as shown on drawing and as specified and directed.

DB - 4124 : M & L for replacement of old damaged Stiffener of Chair CB office wooden with well seasoned first class teak wood complete all as shown on drawing and as specified and directed.

CHAIR EASY (FD-229) FD-229 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Easy all as per drg and as directed.

FD-229 : M/L for removing but unservicable rubber/PVC bush from Chair Easy and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing chair and all as per drg and as directed.

FD-229 : Taking down old worn out Plastic Cane from Chair Easy and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round plastic cane. Canning shall be done with Godrej pattern. All as per drg or as directed by Engr-in-Charge. (Make : AJAY/PREMIER)

FD-229 : M & L for Repairs to Chair Easy by taking down the existing broken/unserviceable wooden front leg and replacing the same with new front leg made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-229 : M & L for Repairs to Chair Easy by taking down the existing broken/unserviceable wooden Rear leg and replacing the same with new Rear leg made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-229 : M & L for Repairs to Chair Easy by taking down the existing broken/unserviceable wooden Arm Rest and replacing the same with new Arm Rest made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-229 : M & L for Repairs to Chair Easy by taking down the existing broken/unserviceable wooden Rail of seat and back and replacing the same with new Rail of seat and back made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

CHAIR DINING (FD-228/279) FD-228/279 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Dining all as per drg and as directed.

FD-228/279 : M/L for removing but unservicable rubber/PVC bush from Chair Dining and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing chair and all as per drg and as directed.

FD-228/279 : Taking down old worn out Plastic Cane from Chair Dining and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round plastic cane. Canning shall be done with Godrej pattern. All as per drg or as directed by Engr-in-Charge.

FD-228/279 : M &L for Repairs to Chair dining by taking down the existing broken/unserviceable front leg and replacing the same with new front leg of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-228/279 : M &L for Repairs to Chair dining by taking down the existing broken/unserviceable Rear leg and replacing the same with new Rear leg of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-228/279 : M &L for Repairs to Chair dining by taking down the existing broken/unserviceable Back Rest and replacing the same with new Back Rest of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-228/279 : M &L for Repairs to Chair dining by taking down the existing broken/unserviceable Stiffener and replacing the same with new Stiffener of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-228/279 : M &L for Repairs to Chair dining by taking down the existing broken/unserviceable Side rail and replacing the same with new Side rail of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-228/279 : M &L for Repairs to Chair dining by taking down the existing broken/unserviceable Front rail and replacing the same with new Front rail of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-228/279 : M &L for Repairs to Chair dining by taking down the existing broken/unserviceable Back rail and replacing the same with new Back rail of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

PEG TABLE (FD-277/384) FD-277/384 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Peg Table all as per drg and as directed.

FD-277/384 : M&L removing unserviceable top of Peg Table and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-277/384 : M/L for removing but unservicable rubber/PVC bush from Peg table and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

FD-277/384 : M & L for replacement of Leg of Peg table with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-277/384 : M & L for replacement of Side/Front rail of Peg table with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

STOOL DRESSING (FD-282) FD-282 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Stool Dressing all as per drg and as directed.

FD-282 : Taking down old worn out Plastic Cane from Stool Dressing and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round plastic cane. Canning shall be done with Godrej pattern. All as per drg or as directed by Engr-in-Charge. (Make : AJAY/PREMIER)

FD-282 : M & L for replacement of Leg of Stool Dressing with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-282 : M & L for replacement of Front Rail of Stool Dressing with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-282 : M & L for replacement of Side Rail of Stool Dressing with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

TABLE DINING 6 PERS (FD-273) FD-273 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dining 6 pers all as per drg and as directed.

FD-273 : M&L removing unserviceable top of Table dining 6 pers and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-273: M & L for replacement of Leg of Table dining 6 pers with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-273: M & L for replacement of Long rail of Table dining 6 pers with new Long rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

TABLE BED SIDE (FD-276) FD-276 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table Bed side all as per drg and as directed.

FD-276 : M/L for removing of unserviceable back of Table bedside and supply and fix new back suitable for the existing table bedside made of 6 mm th plywood and all as per drg and as directed.

FD-276 : M/L for removing of unserviceable Shelf of Table bedside and supply and fix new rack suitable for the existing table bedside and all as per drg and as directed.

FD-276 : M/L for removing of unserviceable Sides of Table bedside and supply and fix new rack suitable for the existing table bedside and all as per drg and as directed.

TABLE 600X600X760 MM(FD-293) FD-293 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table 600 x 600 x 760 all as per drg and as directed.

FD-293 : M&L removing unserviceable top of Table 600 x 600 x 760and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-293 : M/L for removing but unservicable rubber/PVC bush from Table 600 x 600 x 760 and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

TABLE 900X900X760 MM(FD-291) FD-291 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table 900x900x760 mm all as per drg and as directed.

FD-291 : M&L removing unserviceable top of Table 900x900x760 mm and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-291 : M/L for removing but unservicable rubber/PVC bush from Table 900 x 900 x 760 mm and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

FD-291 M & L for replacement of Leg of Table 900 x 900 x 760 mm with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-291 : M & L for replacement of Leg of Table 900 x 900 x 760 mm with new Front rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-291 : M & L for replacement of Leg of Table 900 x 900 x 760 mm with new Side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

SOFA SET 5 SEATER (FD-281/373) FD-281/373 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Sofa Set 5 Seater all as per drg and as directed.

FD-281/373 : M & L for replacement of Front leg of Sofa Set 5 Seater with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Rear leg of Sofa Set 5 Seater with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M&L removing Old cushion together with old faded Tapestry cloth of sofa set (five seater) and provide 100mm synthetic foam 40 density cushion covered with new tapestry cloth not less than Rs.400/ per mtr for seat and back as specified and directed. Chain and Zip also to be fixed.

FD-281/373 : M & L removing old faded tapestry cloth of sofa set five seater) and providing new tapestry cloth not less than Rs.400/ per mtr for seat and back all as specified and directed.Chain and Zip also to be fixed.

FD-281/373 : M & L for replacement of Arm rest of Sofa Set 5 Seater with new Arm rest of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Front and rear rail of Sofa Set 5 Seater with new Front and rear rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Side rail of Sofa Set 5 Seater with new Side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Stiffener of seat & back of Sofa Set 5 Seater with new Stiffener of seat & back of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

TABLE DRESSING LADIES (FD-251/378) FD-251/378 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dressing ladies all as per drg and as directed.

FD-251, FD-378 : M/L for removing the old and unserviceable mirror of Table dressing ladies and supply and fix new mirror of suitable size for Table dressing ladies all as per Drg and as directed by Engineer in Charge.

FD-251, FD-378 : M/L for removing of unserviceable back of Table dressing ladies and supply and fix new back suitable for the existing table dressing ladies made of 18/19 mm thick plywood and all as per drg and as directed.

FD-251, FD-378 : M/L for removing the old and unserviceable drawers of Table dressing ladies and supply and fix new drawers as per specified in drg including replacement of knobs as per specification for Table dressing ladies all as per Drg and as directed by Engineer in Charge.

FD-251/378 : M & L for replacement of Sliding glass shutter Table dressing ladies of size 300x290x5 mm thick , ordinary quality, as per drawing and directed by the Engr-in-Charge including taking out old glass shutter.

FD-251/378 : M & L for replacement of Bottom of Table dressing ladies with 18/19 mm thick particle board commercial type, exterior grade confirming to IS-3087-1989 and ISI marked all other as per existing and as per drawing. All as specified and directed by Engr-in-Charge including taking out old bottom.

FD-251/378 : M & L for Repairs to table dressing ladies by taking down the existing broken /unserviceable wooden leg and replacing the same with new leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-251/378 : M & L for Repairs to Table dressing ladies by taking down the existing broken /unserviceable sides and supply and fixing of new side of suitable size made of 18/19 mm thick commercial type particle board, exterior grade with 1 mm thick plastice laminated sheet, teak vaneered pested over with approved adhesive complete all as specified and directed and as shown on drawing.

FD-251/378 : M & L for Repairs to Table dressing ladies by taking down the existing broken /unserviceable Top and supply and fixing of new Top of suitable size made of 18/19 mm thick commercial type particle board, exterior grade with 1 mm thick plastice laminated sheet, teak vaneered pested over with approved adhesive complete all as specified and directed and as shown on drawing.

TABLE DRESSING GENTS (FD-379/230) FD-379/230 : M/L for preparing the existing wooden surfaces of table dressing gents with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dressing Gents all as per drg and as directed.

FD-379/230: M/L for removing the old and unserviceable mirror of Table dressing gents and supply and fix new mirror of size 380 x 760 or suitable for Table dressing gents all as per Drg and as directed by Engineer in Charge.

FD-379/230 : M/L for removing the old and unserviceable drawers of Table dressing Gents and supply and fix new drawers including one No CP Knob as per specified in drg and as directed by Engineer in Charge.

FD-379/230 : M/L for removing the old and unserviceable Knob of Table dressing Gents and supply and fixing new knob . All as per Drg and as directed by Engineer in Charge.

FD-379/230 : M & L for Repairs to Table dressing gents by taking down the existing broken / unserviceable Top and supply and fixing of new Top of suitable size made of 18/ 19 mm thick commercial type particle board, exterior grade with 1 mm thick plastick laminated sheet, teak vaneered pested over with approved adhesive complete all as specified and directed and as shown on drawing.

FD-379/230 : M & L for Repairs to Table dressing gents by taking down the existing broken / unserviceable bottom and supply and fixing of new bottom of suitable size made of 18/19 mm thick commercial type particle board, exterior grade complete all as specified and directed and as shown on drawing.

FD-379/230 : M & L for Repairs to Table dressing gents by taking down the existing broken / unserviceable Sides and supply and fixing of new Sides of suitable size made of 18/ 19 mm thick commercial type particle board, exterior grade with 1 mm thick plastick laminated sheet, teak vaneered pested over with approved adhesive complete all as specified and directed and as shown on drawing.

FD-379/230 : M & L for Repairs to Table dressing gents by taking down the existing broken/ unserviceable back and supply and fixing of new back of suitable size made of 12 mm thick commercial type particle board, exterior grade complete all as specified and directed and as shown on drawing.

TABLE WRITING (FD-275) FD-275 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table Writing all as per drg and as directed.

FD-275 : M&L removing unserviceable top of Table Writing and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-275 : M/L for removing but unservicable rubber/PVC bush from Table Writing and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table writing and all as per drg and as directed.

FD-275 : M/L for removing of unserviceable back of Table Writing and supply and fix new back suitable for the existing table writing made of 6 mm th plywood and all as per drg and as directed.

FD-275 : M/L for removing the old and unserviceable drawers of Table Writing and supply and fix new drawers including one No CP Knob as per specified in drg and as directed by Engineer in Charge.

FD-275: M/L for removing the old and unserviceable Knob of Table Writing and supply and fixing new knob . All as per Drg and as directed by Engineer in Charge.

FD-275 : M & L for removing the old and unserviceable leg of Table writing and replacing the same with new made of well seasoned first class teak wood after cutting made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-275 : M & L for removing the old and unserviceable Stiffener of Table writing and replacing the same with new made of well seasoned first class teak wood after cutting made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-275 : M & L for removing the old and unserviceable Shutter of Table writing and replacing the same with new made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins including replacement of hinge as per the existing specification complete all as specified and directed and as shown on drawing.

BED HARD (FD-246/247) FD-246/247 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table Writing all as per drg and as directed.

FD-246/247 : M/L for removing the old and unserviceable ply wood top of Bed Hard and supply and fix new 12 mm thick commercial water proof plywood, including avoiding shaking by providing 4 brackets all as per Drg and as directed.

FD-246/247 : M & L for Repairs to Bed plywood top by taking down the existing broken /unserviceable wooden leg and replacing the same with new leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-246/247 : M & L for Repairs to Bed plywood top by taking down the existing broken /unserviceable wooden Long rail and replacing the same with new Long rail made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-246/247 : M & L for Repairs to Bed plywood top by taking down the existing broken /unserviceable wooden Short rail and replacing the same with new Short rail made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-246/247 : Taking out carefully old/ unserviceable plywood (both side) from head board of Bed plywood top without damagine the adjoining parts and S & F (New) Plywood BWR grade, one side teak veneered, 4 mm thick including 4 mm thick teak wood beading all-round the edges of boards all as shown on drawing complete as specified and directed.

FD-246/247 : Taking out carefully old/ unserviceable plywood (both side) from foot board of Bed plywood top without damagine the adjoining parts and S & F (New) Plywood BWR grade, one side teak veneered, 4 mm thick including 4 mm thick teak wood beading all-round the edges of boards all as shown on drawing complete as specified and directed.

ALMIRAH MEDIUM WOODEN 1/2S X 1/2 H FD-291 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Almirah medium wooden 1/2S x 1/2H all as per drg and as directed.

BOOK CASE SMALL WOODEN (FD-45 (M)) FD-45(M) : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Book case small wooden all as per drg and as directed.

FD-45(M) : M & L for replacement of back of book case with 6 mm thick plywood, commercial type grade BWR complete all as shown on drawing and as specified and directed.

FD-45 (M) : M & L for Repairs to book case by taking down the existing broken/unserviceable top and bottom and supply and fixing of new top and bottom of suitable size made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and diredted and as shown on drawing.

CHAIR DINING (FD/MAP/10) & FD/MAP-II/04) FD-228/279 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Dining all as per drg and as directed.

CHAIR WB WITHOUT ARM (FD-285) FD-285 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair WB without arm all as per drg and as directed.

FD-285 : M &L for Repairs to Chair WB without arms by taking down the existing broken/unserviceable front leg and replacing the same with new front leg of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-285 : M &L for Repairs to Chair WB without arms by taking down the existing broken/unserviceable rear leg and replacing the same with new rear leg of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-285 : M &L for Repairs to Chair WB without arms by taking down the existing broken/unserviceable back rest and replacing the same with new back rest of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FD-285 : M &L for Repairs to Chair WB without arms by taking down the existing broken/unserviceable side rail and replacing the same with new side rail of suitable size made of well seasoned first class teak wood complete all as specified and directed and as shown on drawing.

FORM WITHOUT BACK WOODEN (FD-97(M) FD-97 (M) : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Form without back wooden all as per drg and as directed.

HAT STAND (FD-233) FD-233 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Dining all as per drg and as directed.

LOCKER BED SIDE WOODEN (FD-54) FD-54 : M/L for preparing the existing wooden surfaces of Locker bed side with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Locker bed side all as per drg and as directed.

FD-54 : M & L for replacement of shutter of locker bed side with 18/19mm Pre laminated particle board of one side teak face & other side balancing white including replacement of hinge as per existing specification complete all as shown on drawing and as specified and directed.

FD-54 : M & L for replacement of back of locker bed side with 6 mm thick plywood, commercial type Grade BWR complete all as shown on drawing and as specified and directed.

FD-54 : M&L for replacement of leg of Locker bed side with well seasoned first class teak wood complete all as shown on drawing and as specified and directed.

FD-54 : S & F in repair 75 mm size hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

SOFA SET 4 SEATER WITH CUSHION (FD-281/373) FD-281/373 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Sofa Set 4 Seater all as per drg and as directed.

FD-281/373 : M & L for replacement of Front leg of Sofa Set 4 Seater with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Rear leg of Sofa Set 4 Seater with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M&L removing Old cushion together with old faded Tapestry cloth of sofa set (four seater) and provide 100mm synthetic foam 40 density cushion covered with new tapestry cloth not less than Rs.400/ per mtr for seat and back as specified and directed. Chain and Zip also to be fixed.

FD-281/373 : M & L for replacement of Arm rest of Sofa Set 4 Seater with new Arm rest of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Front and rear rail of Sofa Set 4 Seater with new Front and rear rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Side rail of Sofa Set 4 Seater with new Side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Stiffener of seat & back of Sofa Set 4 Seater with new Stiffener of seat & back of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

TABLE OFFICE OFFICER WOODEN (DB-4119) DB - 4119 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Dining all as per drg and as directed.

DB - 4119 : M&L removing unserviceable top of Table Office officer wooden and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

DB - 4119 : M/L for removing the old and unserviceable drawers of Table office officer wooden and supply and fix new drawers as per specified in drg and as directed by Engineer in Charge.

DB - 4119 : M & L for removing the old and unserviceable leg of Table office officer wooden and replacing the same with new made of well seasoned first class teak wood after cutting made to shape and size as required all as shown on drawing complete all as specified and directed.

DB - 4119 : M & L for removing the old and unserviceable Long Rail of Table office officer wooden and replacing the same with new made of well seasoned first class teak wood after cutting made to shape and size as required all as shown on drawing complete all as specified and directed.

DB - 4119 : M & L for removing the old and unserviceable Short Rail of Table office officer wooden and replacing the same with new made of well seasoned first class teak wood after cutting made to shape and size as required all as shown on drawing complete all as specified and directed.

TRESTLE STORE ROOM WOODEN (FD-86(M)) FD-86 (M) : M & L for Repairs to Trestle store room wooden by taking down the existing broken / unserviceable rail and supply and fixing of new rail of well seasoned second class hard wood (SAL) rail of size 2440 x100x100 mm complete all as specified and directed and as shown on drawing.

FD-86 (M) : M & L for Repairs to Trestle store room wooden by taking down the existing broken / unserviceable leg and supply and fixing of new well seasoned second class hard wood (SAL) leg of size 405x100x100 mm complete all as specified and directed and as shown on drawing .

FD-86 (M) : M & L for Repairs to Trestle Store room wooden by taking down the existing broken / unserviceable stiffener and supply and fixing of new well seasoned second class hard wood (SAL) stiffener of size 1980x175x100 mm complete all as specified and directed and as shown on drawing.

FD-86 (M) : M & L for preparing surfaces of wood and wood based material of trestle store room wooden, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and direted and as shown on drawings.

SIDE BOARD (FD-26(M) FD-26 (M) : M & L for Repairs to Side Board by taking down the existing broken / unserviceable top and supply and fixing of New top of suitable size made of 18/19 mm thick prelaminated particle board one side teak face & other side balancing white including all around teak wood beading of 6 mm thick fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing.

FD-26 (M) : M & L for Repairs to Side Board by taking down the existing broken / unserviceable Door shutter and supply and fixing of New Door shutter of suitable size made of 18/19 mm thick prelaminated particle board one side teak face & other side balancing white including all around teak wood beading of 6 mm thick fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing.

FD-26 (M) : M & L for Repairs to Side Board by taking down the existing broken / unserviceable Drawer and supply and fixing of New Drawer of suitable size made of 18/19 mm thick prelaminated particle board one side teak face & other side balancing white including all around teak wood beading of 6 mm thick fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing.

FD-26 (M) : M & L for Repairs to Side Board by taking down the existing broken / unserviceable back and supply and fixing of new back of suitable size made of 6 mm thick commercial plywood grade BWR complete all as specified and directed and as shown on drawing.

M/s National Traders

SHANMUGA TRADERS

Mahesh Traders

p.chinnasamy

joepowercorporation