CA No GE/H-07/2022-23 ADDN/ALTN ROOM No 1433 2433 3433 AND 4433 AT AHRR UNDER GE E/M RR

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid incl over 15mm thick cement screed bed in CM 1:6, set and jointed complete all as specified and directed.

M & L for glazed ceramic digital coloured tiles 600x300x8 to 9 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 18-20mm thick machino polished marble floor slab as in flooring ( Bttochino marble) size as requried at site with neat cement slurry floated over bed mortar pigment to match with shade of floor slab,joint to have hair line finish and finished with matching colour pigment and laid including over 20 mm thick screed bed in CM 1:6, set and jointed curing,rubbing mirror polishing,washing,cleaning,making cut out for services complete all as specified and directed.

Dismantling of wall and ceiling boards of any description, any thicknes including cover fillets and frame work complete all as specified and directed.

Supply & fixing of false ceiling in step (s) comprising of 12 mm thick Gypsum board including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down of shutter of any description exc 2.00 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each complete all as specified and directed.

S&F in replacement toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, (excluding handle, lock and floor spring) complete all as directed.

S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as specified and directed.

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as specified and directed.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. complete all as specified.

S&F Stainless Steel but hinges 100mm size complete all as specified and directed .

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm long extruded section all complete all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed.

S & F of Frame less sliding Glass Show case with 5mm clear glass sliding rollers,handles,locks,and outer aluminium channels etc complete all as specified and directed.

Taking up or down tubing GI 15 mm dia incl all fittings complete all as specified and directed.

All as per item No. 20 here-in-before but 20 mm bore GI Pipe.

S & F 15 mm bore medium grade galvanised steel water tubing with all fittings concealed in wall or floor fixed to wall or laid in floors complete all as specified and directed.

All as per item No-22 here-in-above but bore of pipe 20 mm.

S&F Glass wall corner with wall bracket and fixing accessories complete all as specified and as directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F towel rail 600mm long complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F Toilet roll holder complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F towel ring round complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F soap dish complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F Jet Spray (health Faucet) with 1M long flexible tube with wall hook Chrome Plated complete all as specified and directed.

S&F two way bib cock with wall flange complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F angular stop cock complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F Braided hoses 450mm long complete all as specified and directed.Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F pillar cock Chrome Plated complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F bib cock complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F Shower (Square) size 240X240MM complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F of white colour, vitreous china washdown water closet pan ( wall mounted Composite pattern) fancy type including built in vitreous china flushing cistern dual flush type of capacity 10 litres including PVC white seat cover, complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F of white colour, vitreous china wash Hand Basin size 585X450X220mm( wall mounted wash Hand Basin) complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F in replacement PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as specified and directed.

S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F in replacement of 3-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. Make: Jaguar, Hindware, Kohler Note: The makes specified in Appx 'A' to particular specification are not applicable for this item.

S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.

S&F Stainless Steel wall mounted foldable support toilet Garb Baro verall size of 330x75 mm complete all as specified and directed.

M & L in repairs for Cast iron floor trap of 75 mm outlet plain with grating including jointing to waste pipe in run lead fixed in cement mortar complete all as specified and directed.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

S&F for 100mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified and directed .

S&F 100mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches complete all as specified and directed.

S&F for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls, complete all as specified and directed.

S&F for 100mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches complete all as specified and directed.

S&F cast iron bends,Tee (any radius) diminishing pieces or tapers (larger bore measured) of 100mm bore of pipe fitted with oval access doors complete all as specified and directed.

S&F cast iron 'P' trap or 'S' trap of 100mm size fixed with laid joints laid in floors, complete all as specified and directed.

M&L for 100mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.

S & F in repair of 100mm dia stack clamps made out of 50mm wide and 3 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S & F in repair of 75mm dia stack clamps out of 50mm wide and 3 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings in any position thickness. (Below or above ground level) and removing rubbish off premisses n exc 500 m complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces using integral water proofing compound (3% by weight) for floor and sides of wall complete all as specified and directed ( Note: water proofing compound shall be measured for paid separately as supply only)

M&L for sealing of pipe penetration of toilets core cutting & sunken slab atment in following stages:- Supply and apply solvent free,moisture insensitive epoxy resin based patch repair putty Sikagrade-694F (I) ,yield : 0.6ltr/kg suitable for submerged condition having compressive strength of 40N/mm2(1day) ccording to IS 9162-1979 on pipe penetration surface.The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joints to concrete etration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementtitious coating system as Top coat : Sika Top Seal -107@ 1.5kg/m2 over reinforcement : Sika Fab-1 over base coat :Sika Top seal-107 @ 1.5kg/m2 etc all as specified and directed.System should have compressive strenght:20N/mm2: bond strength :2.0N/mm2 complete all as specified. Note : (i) Entire work shall be carried out through Manufacturar or this authorised representative.(ii) The contractor shall furnish a 10years warranty for fectiveness of waterproofing treatment and the period shall be reckoned from the next day of actual date of completion of work .(iii) An amount of 2.5% of total quoted amount against this item shall be retained out of the final bill amount as security deposit,against 10years water proofing effectiveness and the same shall be released only after the expiry of guarantee period.The contractor may also furnish fixed deposit receipt/BGB in lieu of the sum to be retained as security.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring with smooth surface finished complete all as specified and directed.

Preparing old plaster surfaces of ceilings by brooming down or by steel wire brushing and applying two coat oil emulsion distemper on ceiling complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 etc, including demolition of old brick work complete all as specified and directed.

M & L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement , complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

S&F, Providing and fixing factory made uPVC white colour sement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.)Note:-Each member of window to be measured separately wrth clear length.Casement window (outward /inward opening) with hinge system A(1) Frame (60mm x 58mm)

M&L for 8.0 mm thick plain glass fixed with Alu beading and Rubber beading in aluminium frame all as specified.

M&L for 6.0 mm thick Forsted glass fixed with Alu beading and Rubber beading in aluminium frame all as specified.

M&L for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to E/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and directed.

S&F in repairs of roller blinds vertical type made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed.

Removal of demolished material or soil to a distance n.exc 500M and depositing where directed at a level n.exc. 1.5 M above the starting point complete all as specified and directed.

Taking down old unserviceable point wiring with and including existing conduit / batten type (light, fan, socket or power point) complete such as tube light any type switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site with chasing and cutting surface of wall / floor/ ceiling etc complete all as directed.

Taking down existing sub main wiring aluminium/copper 6 sqmm. Note:- The two run of 6 Sqmm wire and one run of 6 Sqmm wire will be measurd as one unit.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked including cutting & chasing and PVC concealed conduit ISI marked of size 20 mm bore medium grade with PVC conduit fittings such as tees, bends, elbow, reducers including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly including modular Metal flush boxes with modular cover plates of any module suitable for fixing modular switches / sockets / fan regulator of any type etc and making good surface as original by plastering and whitewash/ colour/ distemper etc, complete all as directed for one light point / fan point / exhaust fan point / bell / buzzer controlled by one 1-way switch/ bell push. (Note : The cost of any type Metal boxes and any accessories like cover plates etc will be included in quoted rate.)

All as per srl item No. 72 here in before but point wiring for one socket outet point 5 amps on the same board.

All as per srl item No. 72 here in before but point wiring for one socket outet point 5 amps on the independent board.

All as per srl item No. 72 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. Note : 1. The two run of 6 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit.

Supply & fixing in replacement of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

Supply and fixing in replacement of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

Supply and fixing in replacement of Modular socket 6 Amp, 3 pin, 2 module size complete all as directed.

Supply and fixing in replacement of Modular socket 6/16 Amp, 3 pin, 2 module size complete all as directed.

Supply and fixing in replacement of Modular Fan regulator step type, 100 watts, 1 Module size complete all as directed.

Supply and fix Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

Supply and fix in replacement of 20 Amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified & directed by Engineer-in-charge.

Taking down carefully ceiling fan/cabin fan/Ex fan of any size & make, sealing cable ends, dismantling blades,removing fans & blades to store.

M & L Painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. all as specified.

Fixing only with fixing accessries celing fan and connecting with and including 3 core flexible copper cable from ceiling rose to fan all as directed

Fixing only exhaust fan/cabin fan and connecting up including provision of cable from ceiling rose to connector block all as specified ans directed.

Supply and fix Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

M&L in replacement MCB 6 to 32 Amp, C Curve type, 10kA, single pole with over load and short circuit protection complete all as directed.

All as srl item no 89 here in before but of 40 to 63 amps capacity and SPN type.

Supply and fixing in repair LED luminaire 600 mm x 600 mm ( 2' x 2' LED fittings), 35/36 watt, 220 V AC recessed/surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing in repair bed head light fitting including 1x18 Watt FTL/LED, 1x36 watt CFL/LED, 1x5 watt LED lamp made of powder coated CRCA sheet & acrylic cover including 2 metre lenth of pendent with 03 Nos switches for each light complete all as directed.

Supply and fixing in repair bed side 10 W, 220 V AC LED light fitting with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in repair round shape LED down lights 12 watt, 220 volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

All as per srl item No. 94 but LED down light 15 watt complete all as specified and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and installation hi wall split unit indoor/ outdoor complete with cordless remote control unit and with cooling and heating function of capacity 1.5 TR minimum 5 star rating all as directed by Engr-in-charge. Note. For the connection three core copper wire, copper pipe as per sute required , insulation are deemed in the quoted rate.

Supply and fix voltage stabizer capacity 4 KVA single plase working voltage 140 Volt to 230 Volt 50 Hz including over load protection realy all as directed by Engr-in-charge.

M & L for Sub-main wiring with 4.0 Sq mm (Nominal area ) PVC insulated FRLS unsheathed copper cable of 1100V grade with stranded copper conductor in and including PVC conduit, conceal wring with connected accessories along with continuous earth wire of 4 Sq mm PVC insulated, copper conductor cable and connected to common earth dolly.

S & F Sheet metal enclosure with socket plug top and single pole MCB of capacity 20 Amps cpmplete al as directed by Engr-in-Charge.

Taking down fall ceiling for new connection Oxygen and Vacuum gas pipe line in Paediatric words department, Extracted material to be kept in safe custody and same should be re-fix in existing position comletion the work of new connection oxygen and vacuum gas pipe line. NOTE Cutting/ driling/ welding/ revitting /grouting are deemed in the quoted rate all as directed by Engr-in-Charge.

S & F testing and comissioning of copper pipes 12 mm Nominal outer diameter, 0.70 mm wall thickness suitable for meical gas pipe line, seamless, deoxidized, non- arsenical, half-hand and conforming to BS-13348/2016(R 250) and manufactured as per BS-2871 including saddle, gutti, screw grouting, drilling , complete all as specified and directed by Engr-in-Charge.

All as per item No-102 herein-in- above but 15 mm Nominal outer diameter, 0.90 mm wall thickness completed all as specified and directed by Engr-in-Charge.

All as per item No-102 herein-in- above but 22 mm Nominal outer diameter, 0.90 mm wall thickness completed all as specified and directed by Engr-in-Charge.

S & F decorative type beded side panel consist with Oxygen/Vacuum/ Ai including all connected item( BPC flow meter/ humidifire bottle/ Vacuum jar.prob/air flow meter /Air regulator.oxygen flow meter/Hi pressure tubing ) all as directed by Engr-in-Charge . Note :- If any extra item required which is not reflacted in the schedule deemed in the quoted rate.

M & L for cutting existing Oxygen/Air and Vacuum gas pipe line placing the controll valve as per the requirment and making leakage free gas pipe line all as directed by Engr-in- Charge Note:- Valve of any description should be mesured seperatly.

Supply and installed, testing and commissioning isolation valve size 12 mm for medical gas service , CE marked and manufactured as per ISO- 13458 complete all as specified and directed.

Supply and installed, testing and commissioning isolation valve size 15 mm for medical gas service , CE marked and manufactured as per ISO- 13458 complete all as specified and directed.

Supply and installed, testing and commissioning isolation valve size 22 mm for medical gas service , CE marked and manufactured as per ISO- 13458 complete all as specified and directed.

M/s SAAR ENGINEERS

R D ENTERPRISES

Veenu Builders

L G BUILDERS

LAXMI GROUP

ACR ENTERPRISES

M/S ANIL KUMAR