Installation of Furniture items for 1/ 20 Bedded Boys Hostel with Warden Residence for Rural Health Training Centre at R.S.Pura 2/ 20 Bedded Girls Hostel with Warden Residence for Rural Health Training Centre at R.S.Pura (4th Call)

Amount

SINGLE BED :- Supplying & Fixing in position of single bed with an overall size - 1925mm (L) X 965mm (W) X 1000/450mm (H) without mattress. The construction of the bed shall be supplied in knock down with metal frame made out of MS/CRCA steel pipe having cross-section area 50mm X 25mm with 1.2mm thick. Head and tail panel shall be constructed from CRCA round pipe having dia. 19mm X 1.2mm thick and 15.8mm with 1.2mm thick. The mattress panel shall be made of 19.05mm X 19.05mm square pipe with 1mm thick. The legs shall be made of M.S.E.R.W pipe having cross-section area 40mm X 40mm with 1.2 mm thick. All metal part shall be powder coating finish with DFT (Dry Film Thickness) - 35µ min. The PPCP shoes shall be insert into bottom of legs for avoid skretches on the floors.

STEEL ALMIRAH :- Supplying and Fixing of Steel Almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 2 nos. of adjustable shelves . Door shall be made of 0.8mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. It shall be provided with hanging rod. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ

STUDY TABLE :- Supplying and placing Study Table in knock down condition with an overall size 1200mm X 600mm X 750mm that is to be assembled at site. The worktop shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The top shall be supported on MS/CRCA rectangle pipe frame having cross-section area 25mm X 25mm with 1.2mm thick. The table understructure shall be supplied with MS pipe having 25mm X 25mm with 1.2mm thick. 1 nos. footstep shall be provided between both side leg with the same size i.e25mm X 25mm with 1.2mm thick. Fixed pedestal unit shall be supplied with 1 nos. of drawer at one side. The drawer shall be central locking mechanism by one single key. The drawer shall be operated with recessed handle. The manufacturer shall have basic quality and safety certifications like ISO9001:2015, ISO-14001: 2015, ISO-45001:2018, ISO-50001:2011, BIFMA Membership, IGBC Membership & AIOTA Membership. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screwwithdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

STUDY CHAIR :- Supplying & Fixing of Study Chair. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam having density 45kg/m³ and the back shall be padded with high resilience moulded polyurethane foam having density 40kg/m³. The same shall be upholstered with jute fabric tapestry 1mm thick and 300 GSM. The chair shall be supplied with polypropylene/ABS seat and back cover for external support. The backrest of the chair shall be made by keeping the natural curvature of the spine. The armrest shall be used black integral polypropylene arm completely joint with seat. For seating durability the chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded 30% glass filled black nylon having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 430±10 mm(D) X 460±10 mm(W) and back size shall be 415±10 mm(W) X 400±10 mm(Ht) from seat. Overall height shall be = 920±10 mm, base width/ depth = 710±10 mm.

WARDEN ROOM CHAIR :- Supplying & Fixing of Chair. The seat and back shall be made of 12mm thick plyboard and 15mm thick hot pressed plywood padded with high resilience polyurethane foam (25+19)mm thick having density 40kg/m³ in seat and 25mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. Cushion arm shall be provided with leatherite tapestry completely joint with seat. The frame structure shall be supported by four legs made up of MS/CRCA chrome plated round pipe of Dia 25.4mm with 1.6mm thick reducing pipe. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 440±10 mm(D) X 435±10 mm(W) and back size shall be 425±10 mm(W) X 480±10 mm(H) from seat. Overall height shall be = 890±10 mm, overall depth = 575±10 mm & overall width = 610±10 mm.

WARDEN ROOM CENTRE TABLE :- Supplying & Fixing Centre Table with an overall size 1200mm X 600mm X 450mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The understructure shall consist of SS 202 grade pipe frame with shiny chrome finish with an overall size the size 40mm X 20mm with 1.6mm thick. One nos. footstep shall be provided between the frame with same size i.e. 40mm X 20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor.

WARDEN OFFICE TABLE :- Supplying & Fixing table with an overall size 1200mm X 600mm X 750mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel with the assistance of edge banding machine at 200 degree celsius. The top shall be supported on MS CRCA powder coated rectangle pipe frame having cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall be supplied with MS powder coated rectangle pipe having crosssection area 40mm X 20mm. The gable end shall be given at one side made up of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. Fixed pedestal unit shall be supplied with 3 nos. of drawer i.e. 2 box+1 filing at one side. All the drawer shall be synchronized locked with central locking mechanism by one single key. The drawer shall be operated with ABS plastic recessed handle. The manufacturer shall have basic quality and safety certifications like ISO-9001 14001-45001-50001, BIFMA, IGBC & AIOTA Membership. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

WARDEN OFFICE HIGH BACK CHAIR :- Supplying & Fixing of High Back Chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 40Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of the chair shall be supplied with polypropylene bead on edges and the backrest shall be made by keeping the natural curvature of the spine with lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should be five legged injection moulded in black 30% glass filled nylon having pitch circle Dia. 700±15 mm and fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 475±10 mm(W) X 460±10 mm(D) and back size shall be 470±10 mm(W) X 610±10 mm(H) from seat. Overall height shall be = 1050±10 mm, Overall width (arm) = 545±10 mm, base width/depth = 760±10 mm.

WARDEN OFFICE VISITOR CHAIR :- Supplying & Fixing of Visitor Chair with ergonomic design for user comfort. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 40Kg/m³ in back. The same shall be upholstered with tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene bead on edges and the backrest shall be made by keeping the natural curvature of the spine. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used of black integral polyurethane arm with metal insert completely joint with seat and back. The frame structure shall be cantilever support type made up of MS/CRCA powder coated round pipe of Dia. 25.4mm with 2mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 460±10 mm(W) X 450±10 mm(D) and back size shall be 460±10 mm(W) X 400±10 mm(H) from seat. Seat height = 450±10 mm, Overall height shall be = 830±10 mm, Overall width - 555±10 mm, overall depth = 595±10 mm.

DINING TABLE :- Supplying & Fixing Dining Table with an overall size 1800mm X 900mm X 750mm. The top shall be made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on MS/CRCA rectangle pipe frame having cross-section area 70mm X 20mm with 1.6mm thick. The understructure shall consist of four legs made up of MS round pipe having dia. 38.1mm with 1.6mm thick. The Joints shall be made using TIG welding. The metal parts shall be powder coated to dry film thickness of 40-60µ. There shall be PPCP shoe provided at bottom to avoid scratches on the floor.

DINING CHAIRS :- Supplying & Fixing of cafe chair. The seat and back shall be made of one piece injection moulded polypropylene shell. The seat & back shall be bend in L-type shape and arrested together with metal pipe frame. Grooves shall be given to the back of the chair for easily keeping and moving of the chair. The frame structure shall be supported by four legs made up of MS/CRCA chrome plated round pipe of Dia. 19.05mm with 1.5mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 410±10 mm(D) X 425±10 mm(W) and back size shall be 450±10 mm(W) X 400±10 mm(H) from seat. Overall height shall be = 820±10 mm.

SEMINAR ROOM-CUM-LIBRARY TABLE :- Supplying & Fixing Table with an overall size 900mm Dia. X 750mm. The top of the table shall be made up of 25mm thick particle board. The top profile shall be in circular shape. The top shall be supported on MS powder coated pipe frame having cross-section area 50mm X 25mm. The table under structure shall be made up of MS/CRCA powder coated triangular shape reducing leg. There shall be leveler shoe provided at at the base to avoid scratches on the floor.

SEMINAR ROOM-CUM-LIBRARY CHAIR :- Supplying & Fixing Chair. The seat and back shall be made of 12mm thick hot pressed plywood upholstered with high resilience polyurethane foam 25mm thick having density 40kg/m³ in seat and 25mm thick having density 32Kg/m³ in back with fabric tapestry 0.6mm thick and 235 GSM. The frame structure shall be supported by four legs made up of MS CRCA powder coated reducing leg. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 400±10 mm(D) X 490±10 mm(W) and back size shall be 470±10 mm(W) X 380±10 mm(H) from seat. Overall height shall be = 820±10 mm.

SEMINAR ROOM-CUM-LIBRARY BOOK CASE :- Supplying & Fixing of Metal Book Case with an overall size 915 mm (W) X 320 mm (D) X 1750mm (H). The book case shall be supplied with 4 nos. of individual compartments. Top, back & side panels shall be made of 0.8mm and rest 1mm high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. Each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. Each door shall have plastic side end caps as handle which is easy to grip. Each compartment has a storage shelf having Uniformly Distributed Load Capacity of each shelf is 40 Kg maximum. The finish is Epoxy Polyester Powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.

Mattress for Single Bed – Size: 1900mmx900mmx100mm PU mattresses of 32density with cover of superior quality viz., Sleepwell, Kurlon, Godrej.

International Gas Agency