CAMOUFLAGE AND EXTERNAL PAINTING TO BLDG IN ZONE A IN DOMESTIC AREA AT AF STATION JAISALMER

Amount

15mm thick external plaster in cement mortar (1:4) on external wall surface finished even & fair without using extra cement including taking down old plaster complete all as specified and directed.

15mm thick plaster in cement mortar (1:6) on internal wall surfaces finished even & smooth, without using extra cement including taking down old plaster complete all as specified and directed.

Reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) in chajjas etc including demolition of existing cement concrete complete all as specified and as directed

Use and waste of form work to faces of chajja through and similar item rough finished surface of concrete complete all as specified and as directed .

TMT reinforcement bars 6 to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Rendering 10 mm thick in cement and sand mortar 1:3 on fair faces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed

Preparation of new plastered surfaces of ceilings of any description and applying three coat of white wash complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer as approved complete all as specified and directed.

Preparation of new plastered surface of any description and applying two coats of oil emulsion distemper including chalk whitening preparatory to distempering of wall as approved etc complete all as specified and directed.

Preparation of old plastered surfaces of walls and applying one coat of cement base paint approved shade/tint after removal of existing treatment by washing, rubbing down and stopping of painted surface complete all as specified and as directed .

Preparation of old plastered surfaces of walls and applying two coats of cement base paint approved shade/tint after removal of existing treatment by washing, rubbing down and stopping of painted surface complete all as specified and as directed .

Preparation of old surface ( plastered or un plastered ) of wall including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of celing including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of wall including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of tinted oil bound distemper complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of wall including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying two coats of tinted oil bound distemper complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) of celing including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of tinted oil bound distemper complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of exterior emulsion paint (Apex) on surface of wall /floor surface (VVIP area) any colour as approved by GE complete all as specified and directed.

Preparation of old surface ( plastered or un plastered ) including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot mould, moss and efflorescent salt and trading oil and greasy spot and applying two coats of exterior emulsion paint (Apex) on surface of wall /floor surface (VVIP area) any colour as approved by GE complete all as specified and directed.

Painting to old wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed .

Painting to old steel surfaces surface of any description not otherwise described over 10 cm in width or girth including preparation of already primed surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed .

Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 15cm high and 2.50cm width with thick synthetic enamel paint of approved tint complete all as specified and directed.

Chequered cement concrete tiles 25cm x 25cm x 22 mm-25 mm thick with grey cement and pigment, set , jointed and pointed in neat cement slurry in floor over and including 15 mm thick screed bed in cement and sand mortar 1:6 including dismantling of existing tiling with cement mortar bedding complete all as specified and as directed .

60mm thick coloured machine pressed with grey cement and no pigment interlocking factory made paver blocks rubber moulding of any size and shape conforming to IS 15658-2006, M-35 set, jointed and pointed in dry sand over including 25 mm thick sand cushion including dismantling of existing tiling with cement mortar bedding complete all as specified and as directed .

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base of floors including finishing the top surface of concrete even and rough complete all as specified and as directed .

Plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in lintel, cill, bed block, coping ,bed plate, bond stone etc including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed

50 mm thick jalli in Precast reinforced cement concrete 1:2:4 type B-0,using 12.5 mm graded aggregate and setting in cement and sand mortar 1:4 etc fixed in repair complete all as specified and as directed

S K TRADER

SUMIT ENTERPRISES

M/s RKG CONSTRUCTIONS

Leelashah Enterprises

Malik Builders