Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Responsive |
| 2 | Accepted-Technical | Accepted-Technical Responsive |
Tender Value
₹36.1 L
EMD Value
₹72,142
Closing Date
2 Apr 2026, 11:00 amClosed
Executive Engineer Killar Division HPPWD Killar
Executive Engineer Killar Division HPPWD Killar
C/O Balance work Additional four rooms including approach road.
2026_PWD_132640_1
15227-37
Open Tender
Civil Works - Buildings
Percentage
180 days
KILLAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,000
₹72,142
6 Apr 2026
27 Mar 2026
2 Apr 2026
27 Mar 2026
2 Apr 2026
27 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing under layer for plinth protection of 75mm (Seventy five3 millimetre) thick (unconsolidated) bed dry brick/stone aggregate 40mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specification,approved Drawing,design to the entire satisfaction and direction of the Engineer-in Charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | 34.23 | Per square metre. | - | - |
| 2 | Providing plinth protection 50mm (Fifty millimetre) thick in cement concrete 1:3:6 (1 cement 3 sand 6 graded stone aggregate 20mm (Twenty millimetre) nominal size including curring complete as per HPPWD specification,approved Drawing,design to the entire satisfaction and direction of the Engineer-in Charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | 34.23 | Per square metre | - | - |
| 3Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (Fifteen into twenty two centimeter) thick in cement mortar 1:6 (1 cement 6 sand ) and inside plastring with cement plaster 1:3 (1 cement 3 sand ) including earth work and laying 10 cm (Ten centimeter) thick cement concrete in 1:5:10 (1 cement 5 sand 10 graded stone aggregate) of 40mm nomianl size) and 7.5 cm (Seven decimal five millimeter) thick cement concrete 1:2:4 (1 cement 2 sand 4 graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design/drawingcomplete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | |||||
| 4Providing wood work in frames of doors, windows, clear storey windows and other frames wrought frames and fixed in partition second class Deodar wood complete as per HPPWD specifications, approved Drawings, design, to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | |||||
| 5Providing and fixing 40mm (forty milimeters) thick second class deodar wood panelled and glazed or panelled and glased shutters, for doors and windows and clerestory windows, including black ennameled iron butt hinges with necessary screws complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | |||||
| 6 | Brick work using common burnt clay first class building bricks in cement mortar 1:6 (one cement : one sand) in foundation and plinth up to floor all levels including curing complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | 1.77 | Per Cubic metre | - | - |
| 7Providing and fixing 40x3mm (Forty into three millimetre) flat iron hold fast 40cm (Forty centimetre) long including fixing to frame with 10mm (Ten millimetre) dia meter bolts and nuts and wooden plugs and embedding in cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 20 mm (Twenty millimetre) niminal size, block 30x10x15cm (Thirty into ten into fifteen centimetre) complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | |||||
| 8Providing and fixing 250 mm x 16mm (Two hundred fifty into sixteen millimetre) matt finish anodized aluminum sliding door bolt ,anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Government. | |||||
| 9Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) aluminium (Matt finish ) tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | |||||
| 10Providing and fixing 125 mm (One hundred fifty five millimetre) aluminium ( Matt finish ) handles anodized transparent or dyed to required shade and colour with screws complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. | |||||
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
SBD.pdf
Tender Documents • 3.31 MB
BOQ_196157.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .