Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC B XI 746 STREET NO 6 BHARAT NAGAR BARNALA 148101 | BARNALA | BARNALA | PUNJAB | 148101 | L1 | Accepted-AOC Being Lowest bidder | |
| 2 | L2₹29.9 L+₹2.3 L (8.39%)Rejected-Finance 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹33.0 L+₹5.4 L (19.6%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹39.6 L+₹12.0 L (43.5%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Himanshu, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2023_MES_600307_1
GE(S)/PAT/T-23/P/2023-24
Open Tender
Civil Works
Item Rate
180 days
Mil Stn Patiala
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (S) Patiala
₹60,000
Yes
30 Jun 2023
1 Jun 2023
30 Jun 2023
1 Jun 2023
28 Jun 2023
14 Jun 2023
1 Jun 2023 - 7 Jun 2023
Amount
Dismantling floor hearth wall tilling incl CM (beading bud not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for anti-skid premium (1st) quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.
Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 450 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in any thickness (below or above ground level), complete all as specified and directed by Engineer-in-Charge.
PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate 25mm thick as in bedding layer under floor tiles etc complete all as specified and directed by Engineer-in-Charge.
S&F Framed work such as grills,Gates, cooler stands gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete reinforced RCC Tank and similar suspended work incl removing debries obtained from demolition to a distance exc 250m but n.exc 500m and deposting where directed at a level n.exc 1.50m above the starting point complete all as specified and directed by Engineer-in-Charge.
Dismantling old unserviceable cement concrete/PVC water tanks of any description, capacity exc 250 and not exc 500 litres and removing from site including provision of PVC Water Storage Tank 500 ltr Capacity HDPE Double Layered ,Cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet Pipe connection including locking arrangement, Ball Valves high pressure of PTMT with Epoxy coated Aluminium Rod & high density plastic ball screwed for iron Pipe 20mm dia and (Min Weight 20mm-210gms) complete all as specified and directed by Engineer-in-Charge. Note (i) inlet ,out let & wash out pipe will be measured and paid separately.
Disconnecting existing tanks of capacity exc. 250 but n exc. 500 litres, setting aside or lowering for cleaning etc and hoisting reconnecting and refixing in position complete all as specified and directed by Engineer-in-Charge incl necessry GI fittings
Taking down eaves gutters and rain water pipes (AC Rain water pipe/SWG pipe line) of any size or pattern including all fittings etc complete all as specified and directed by Engineer-in-Charge.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge.
PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.
PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed by Engineer-in-Charge.
Taking up or down 15mm bore steel water tubing and connections complete all as specified and directed by Engineer-in-Charge.
GI tubes 15mm bore, medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
Taking up or down 20mm bore steel water tubing and connections complete all as specified and directed by Engineer-in-Charge.
GI tubes 20mm bore, medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated fancy type screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe fixed in repair complete all as specified and directed by Engineer-in-Charge.
S&F Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated fancy type screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe fixed in repair complete all as specified and directed by Engineer-in-Charge.
Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 incl Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engineer-in-Charge.
Rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 finished fair and even with out using extra cement complete all as specified and directed by Engineer-in-Charge.
Preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat cement base primer complete all as specified and directed by Engineer-in-Charge.
M&L for PVC waste pipe 32mm dia plain of standard length/size suibable for WHB and steel sink fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 18/19mm thick veneered particle board, solid core, exterior grade,with decorative face veneers one face, ISI marked.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel 300 mm ordinary rat tail rod pattern spring incl roller and roller plate.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm bore bib tap, CP fancy type, screwed down high pressure fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PVC low level flushing cistern 10 litre capacity, ISI marked, white. Fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Vitreous china bowl urinal flat back size 465mmx 355mm x 265mm white with greating and union for discharge pipe (excluding flushing cisten, flush pipe and waste pipe) fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Vitreous china squating pan orissa pattern size 580mm x 440mm, white, with integral foot rests (excluding flushing cisten and flush pipe) fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Vitreous china wash down water closet pan pedestal pattern , white, (excludingfixing bolts, flushing cisten and flush pipe) fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PVC connection 450mm long ,15mm size with PTMT nuts fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PVC connection 600mm long ,15mm size with PTMT nuts fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PTMT standard bib tap 15mm bore dia, any colours, screwed for iron pipe . (Minimum weight 90gms). fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Stop cock high pressure of PTMT of size 15mm bore any colour, (minimum weight 90gm).fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm bore dia PTMT Nipple suitable for HDPE water tank.( min wt. 38gm) fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 20mm bore dia PTMT Nipple suitable for HDPE water tank.( min wt. 45gm) .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PTMT waste coupling, 32mm dia bore suitable for steel sink .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for CP towel rail 60cm long with brass screw and cleats fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Toilet paper holder stainless steel with steel screw.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PVC seat cover (for EWC / Anglo Indian type WC). fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel butt hinges medium weight,cold rolled, ISI marked, 100mm long .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel butt hinges medium weight,cold rolled, ISI marked, 75mm long .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel butt hinges medium weight,cold rolled, ISI marked, 50mm long .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel sliding door bolts,plate type, stove enamelled black, ISI marked, 300mm long, with bright bolt not less than 16mm dia including nut, bolts and screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel pressed handles,oval type, ISI marked, 150mm long stove enamelled black including screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel pressed handles, oval type, ISI marked, 100mm long stove enamelled black including screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel barrel tower bolt, 150mm long, ISI marked, stove enamelled black, with bright bolt including screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel barrel tower bolt, 200mm long, ISI marked, stove enamelled black, with bright bolt including screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Aluminium alloy, anodised, siliding door bolt, 300mm long, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia including fixing bolts and nuts fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Aluminum anodized, barrel tower bolts of extruded section 200mm long, ISI marked including fixing steel screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Aluminum anodized, barrel tower bolts of extruded section 150mm long, ISI marked including fixing steel screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Aluminum bow handles, cast type, anodized 100mm long, ISI marked, including fixing steel screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Aluminum bow handles, cast type, anodized 150mm long, ISI marked, including fixing steel screws.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Floor door stopper 75 mm size of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate 140 mm, ISI marked .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PTMT grating doom, 125/140 mm dia (minimum weight 40gms) .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Continuous (piano) hinge, mild steel, bright finish, ISI marked, (width of fllap 40mm when open) .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm dia, chromium plated stop cock, cast copper alloy, high pressure with crutch or butterfly handle.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm dia, pillar tap, cast copper alloy with capstan head, fancy type, chromium plated,high pressured with or without lettered "Hot" or "cold.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Brass chromium plated mixer for Wall/WHB for mixing hot and cold water screwed down high for 15mm bore pipe or union fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of apertutre 1.18mm fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated guard and railing 60cm long.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PTMT grating round 125 mm size.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Glass 4 mm thick pin head of required size as directed. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Sheet glass 4 mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Vitreous china wash hand basin , white, flat back, of size 550x400mm.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Sink with drainage board made of stainless steel 1.0mm thick with plug washer and waste PVC pipe overall size 915x460mm bowl size 410x330x160mm.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 19mm thick pre-laminated (both sides) particle board, exterior grade, ISI marked, pre laminated one side with decorative choice lamination and other side balancing white lamination. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 4mm thick (3 ply) Plywood grade BWR, type BB ISI marked. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 6mm thick (5 ply) Plywood grade BWR, type BB ISI marked. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 9mm thick (5 ply) Plywood grade BWR, type BB ISI marked. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for 12mm thick (7 ply) Plywood grade BWR, type BB ISI marked. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PTMT waste coupling, 32 mm dia bore (Make: Paryag, Prima, Jainko, Parko) suitable for steel sink .fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for CP shower rose fancy type, revolving type, suitable for 15 mm bore GI pipe. fixed in repair complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any discription exc 1 sq. m and n exc 2 sq. m complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames ( with or without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engineer-in-Charge.
S&F Solid PVC door frame of size 50x47 made of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in open as per speifiction complete all as specified and directed by Engineer-in-Charge.
S&F Factory made solid pvc moulded door shutter 28 to 30 mm thick (stiles ) with 2,4,6, raised panel design with 2mm thick sheet on front face and 2 mm plain colour pvc sheet on back face supplying and fixing in frame at site as per specification and dwg complete all as specified and directed by Engineer-in-Charge.
M&L for PVC water storage tank 1000 ltrs capacity ISI marked, double layered. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for CP grating round 100 mm size.fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for PVC cabinet with looking mirror fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for CP Hand shower (Health faucet) shower including 1.50 meter long flexible tube. fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for Steel rack for kitchen 600mm x 600mm of weight not less than 7 Kg each fixed in repair complete all as specified and directed by Engineer-in-Charge.
M&L for CP Jet Spray suitable for EWC including 1.50 meter long flexible tube. fixed in repair complete all as specified and directed by Engineer-in-Charge.
Arneja Builders
rkkataria and sons
Nanotech Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .