Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 CrAccepted-AOC PLOT NO 122 JANAK PURI I IMLIWALA PHATAK TONK ROAD JAIPUR RAJASTHAN 302015 | JAIPUR | JAIPUR | RAJASTHAN | 302015 | ₹28.0 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹30.7 CrRejected-AOC | ₹30.7 Cr | L2 | Rejected-AOC L2 |
| 3 | L3₹31.6 CrRejected-AOC | ₹31.6 Cr | L3 | Rejected-AOC L3 |
| 4 | L4₹34.6 CrRejected-AOC | ₹34.6 Cr | L4 | Rejected-AOC L4 |
| 5 | L5₹40.5 CrRejected-AOC | ₹40.5 Cr | L5 | Rejected-AOC L5 |
Tender Value
₹24.7 Cr
EMD Value
₹34.8 L
Closing Date
24 Sept 2021, 12:00 pmClosed
Executive Engineer, PWD Civil-Division No.I(B)
Block-I, PWD Campus, Silvassa.
Construction of District Prison for the UT of DNH and DD at Randha.
2021_UTDNH_5593_2
E-TENDER NOTICE NO.19 OF 2021-22 (BLDG)
Open Tender
Civil Works - Buildings
365 days
UT of DNH and DD
As per tender documents
3 documents required · 3 mandatory
₹3,000
Executive Engineer, PWD Civil-Division No.I(B)
₹34.8 L
13 Dec 2021
16 Sept 2021
24 Sept 2021
16 Sept 2021
24 Sept 2021
16 Sept 2021
Amount
Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(D) By mechanical means in area of thorny jungle
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(E) Hard Rock
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(E) Hard Rock
Filling available excavated earth (soft soil) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.
Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating etc. complete. (more than 10 ton)
Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete (upto 10 ton)
Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton)
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. (more than 10 ton) as per direction of the Engineer - in - charge.
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (B) Ground Beams & Plinth Beams upto floor two level. (more than 10 ton) as per direction of the Engineer - in - charge.
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D)BEAMS having cross sectional area 0.12 to 0.18 sq.mt. as per direction of the Engineer - in - charge. GROUND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D)BEAMS having cross sectional area 0.12 to 0.18 sq.mt. as per direction of the Engineer - in - charge.FIRST FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D)BEAMS having cross sectional area 0.12 to 0.18 sq.mt. as per direction of the Engineer - in - charge. SECOND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D)BEAMS having cross sectional area 0.12 to 0.18 sq.mt. as per direction of the Engineer - in - charge. THIRD FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D)BEAMS having cross sectional area 0.12 to 0.18 sq.mt. as per direction of the Engineer - in - charge. FOURTH FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (E) Slabs, landings, shelves, balconies and cantilever slabs. (more than 10 ton) as per direction of the Engineer - in - charge.GROUND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (E) Slabs, landings, shelves, balconies and cantilever slabs. (more than 10 ton) as per direction of the Engineer - in - charge. FIRST FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (E) Slabs, landings, shelves, balconies and cantilever slabs. (more than 10 ton) as per direction of the Engineer - in - charge. SECOND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (E) Slabs, landings, shelves, balconies and cantilever slabs. (more than 10 ton) as per direction of the Engineer - in - charge. THIRD FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (E) Slabs, landings, shelves, balconies and cantilever slabs. (more than 10 ton) as per direction of the Engineer - in - charge. FOURTH FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Columns (more than 10 ton) as per direction of the Engineer - in - charge. GROUND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Columns (more than 10 ton) as per direction of the Engineer - in - charge. FIRST FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Columns (more than 10 ton) as per direction of the Engineer - in - charge. SECOND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Columns (more than 10 ton) as per direction of the Engineer - in - charge. THIRD FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Columns (more than 10 ton) as per direction of the Engineer - in - charge. FOURTH FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (F) Chajja and lintel (upto 10 ton) as per direction of the Engineer - in - charge. (A) Ground Floor
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (F) Chajja and lintel (upto 10 ton) as per direction of the Engineer - in - charge. (B) First Floor
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (F) Chajja and lintel (upto 10 ton) as per direction of the Engineer - in - charge. (C) Second Floor
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (F) Chajja and lintel (upto 10 ton) as per direction of the Engineer - in - charge. (D) third Floor
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (H) RCC WALL upto floor two level (upto 10 ton) (A) Ground Floor
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (G) Staircase excluding landing (upto 10 ton) as per direction of the Engineer - in - charge. GROUND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (G) Staircase excluding landing (upto 10 ton) as per direction of the Engineer - in - charge. FIRST FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (G) Staircase excluding landing (upto 10 ton) as per direction of the Engineer - in - charge. SECOND FLOOR
Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (G) Staircase excluding landing (upto 10 ton) as per direction of the Engineer - in - charge. THIRD FLOOR
Providing material and labour for TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (more than 10 ton) (A) Foundation and Plinth
Providing material and labour for TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (more than 10 ton) (C) First Floor
Providing material and labour for TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (more than 10 ton) (D) Second Floor
Providing material and labour for TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (more than 10 ton) (E)Third Floor
Providing material and labour for TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (more than 10 ton) (F)Fourth Floor
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional (upto 10 ton) (A) Foundation and Plinth
Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional (A) Ground Floor
Extra for brick work in superstructure above floor two level Item No. 2(6.13) (B) Conventional (more than 10 ton)
Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm Mild steel round bars after every three course embedded in Cement Mortar in foundation and plinth (B) Conventional (upto 10 ton) All Floor
Extra for half brick masonry in superstructure above plinth level upto floor two level.(B) Conventional (upto 10 ton) (A) Ground Floor
Extra for half brick masonry in superstructure above floor two level. (B) Conventional (upto 10 ton) (B) First Floor
Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO FLOOR TWO LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry (A) Ground Floor
Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO FLOOR TWO LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry (B) First Floor
Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO FLOOR TWO LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry (C) Second Floor
Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO FLOOR TWO LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry (D) Third Floor
Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO FLOOR TWO LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry (E) Fourth Floor
Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry. (A) Ground Floor
Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry. (B) First Floor
Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry. (C) Second Floor
Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.(D) Third Floor
Providing material and labour for applying exterior surface texture. `Heritage' of Bakelyte Hylam over [grit finish G-1987] or luxture a base coat of cement plaster to include : a) Application of Heritage surface Texture grit finish consisting of a two component system of dry granite and acrylic polymer bonding agent mixed in proportion specified by the manufacturers. Thickness of individual grid to vary between 150 to 180 mm microns and applied thickness of dry coating being 1.5 mm.(first layer rough plaster 12mm thickness,and last layer 8mm thicness) plaster thicness 20mm thickness ALL FLOOR UP TO HEIGHT OF BUILDING
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring & Skirting and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARK shade (more than 10 ton)
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring & Skirting and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit (upto 10 ton)
Providing and laying Marbo Grenite tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (upto 10 ton)
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick (upto 10 ton)
Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (upto 10 ton)
Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (upto 10 ton)
Providing material and labour for Laying 24" x 24" Ceramic Tiles 6mm thick tile flooring over 12 mm (average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and mat finish and jointed with color cement slurry including finised with flush pointing & cleaning the surface and MAAT finished tiles to be used etc. complete for antiskit (upto 10 ton)
Providing material and labour for laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton) etc. complete as per EIC.
Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton)
Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth.
Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. (upto 10 ton)
Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled.
Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, for Doors windows and clearstory windows including anodised alluminium But hinges with necessary screws and indian teak wood shutters with. (B) Particle board panels (more than 10 ton)
Providing wood work in frames of Doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood (upto 10 ton)
Providing and fixing post and pipe railing as per detailed drawing including 3 coats of painting to steel works complete. (more than 10 ton)
Providing and fixing extruded aluminum window having extruded aluminum Colour anodized section frame main outer size 127mm x 38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384 Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x 1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt),vertical member of size 122.20mm x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.
Providing and fixing fix glass window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.
Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 1meter placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embedded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete ( Approved Makes -Tata/SAIL/Jindal/Essar/Bhushan Steel/Arecelor Mittal). Railing height is 1 M. as per approved by architect. COMPLETE EIC
Applying general insecticide pest control treatment to floors ,cupboards,plinth,walls etc including labour material etc. complete. Using heptachloride 20 EC. As per 6113_pest Consentration Weight 0.50 percent is recommended one litre chemical emulison dillute with 39 litre of water will give . total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 /litre chemical/sqm of surface is recommended as per is including rate in plinth
Providing and fixing 1.2 thick S.S. 304 2b grade sheet with nitric acid.Process etching plate and all text &graphics fill-up by standard enemel black colored. Fitted with flats SS etching plat should be mounted on wall / wooden surface by SS screws and/or by 3m double side gum-tape,and where applicable as per company's guideline,with prior approval by Architect or on-site-authorised person.Indoor signage: stainless steel etching signage size :300X75mm (used in all chambers/door)COMPLETE EIC
Providing and fixing S.S.matt finished with back-lite by LEDs lighting on ACP fascia.Providing 3mm thick alluminium composite panel (ACP) sheet fascia and all side with required iron angle / hollow heavy pipe structure frame. and back side cover up by aliminium sheet ,complete box should be water-proof.size :10'0"X4'0"X0'5".Outdoor signage: stainless steel latters / logo signageCOMPLETE EIC
Providing and fixing moveble aluminium louvers window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.
Providing and layingchina mosaic integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge. - With average thickness of 120 mm and minimum thickness at khurra as 65 mm. all complete as directed by engineer incharge.
Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete.
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. (upto 10 ton)
Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M250 pnumatic compressed by mechanically pressed and as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.
Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. (more than 10 ton)
Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. (upto 10 ton)
Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour
Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour
Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) white plastic seal and cover.
Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size
Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour
Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.
Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.
Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia..(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.
Providing and fixing brass screw down stop tap.(A) 15mm dia.
Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.
Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia.
Providing and fixing chromium plated brass health faucet cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.
Providing and fixing Urinal PUSH FLUSH VALVE COMPLETE EIC/AS PER ARCHITECTURE
Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(Make specified as per appendix-1)
Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and curing complete.(B) 150mm dia. (166mm Ave. bed thickness)
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton)
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm (more than 10 ton)
Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton)
Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing 12.5 Litres high level C..I. flushing cistern with A pair of C.I. or Mild steel brackets, womplete with fittings such as syplionic arrangement, 15mm nominal size brass ball valve with polythene float, lever G.I. China (60 cm. ) and pull union and couplings for connections with inlet, outlet and overflow pipes etc. including cutting holes in walls and making good the same (overflow pipe to be measured and paid fo separately )
Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of cover to be not less 4.53 Kg.) (upto 10 ton)(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and fixing in position cowel went to pipes.(C) 100mm dia
Providing & fixing PVC water tank such as Sintex or equivalent on terrace, loft as directed by Engineer incharge including loading, unloading at site, supply and fixing on inlet, air vent, overflow, wash out with necessary gasket / packing, washer, check nuts and padestal of 300 mm height made of brick work and plaster.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT
Providing and drilling 215 dia nacked bore hole in overburden state (alternate layers of lime stone & yellow sticky clay formation) by DTH Ring up to required depth (Approx. up to 70 mt) including fixing of 175/180 dia ERW/PVC pipes (blank & slotted) & if required further drilling of 165 mm dia bore hole in Hard rock (trap etc) strata by DTH drilling method up to total depth of 120 mtr including measuring the yield by V notch and flushing of bore etc.
Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for 150mm diameter sewer.
(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton)
Earthwork for embankment including breaking clods, dressing with all lead and lift (excluding watering and consolidation)(C) From Borrow area within 1.0 Km.lead (upto 10 ton) including Rolling levelling & watering of earth work as directed
Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 200meters from the end of the cutting with all required lead and lift.
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil
Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. (more than 10 ton)
Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. (more than 10 ton)
Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. (more than 10 ton)
Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. (more than 10 ton)
Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (L) Chullah Hoods, weather shades Chhajjas Corbels etc. including edges. (more than 10 ton)
Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (B) Slabs, landing, shelves, Balconis , Lintels, Beams, Girders and Cantilever upto floor two level. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of suspended floor roof slabs Landings and the like. (2) Floors etc. above 200mm in thickness. (more than 10 ton)
Exposed brick cladding using exposed sand finished (traditional) cladding brick of approved make of size 225 x 65 x 30 mm ,includng to 10mm rough plaster in proposion 1:4(1 cement:4 sand) and fitting this tile used to adhesive chemical including cost of scaffolding, curing etc. complete in superstructure upto all level as per drawing and design approved by architect / engineer
Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the structural designs and directions of Engineer in charge.Column ( 122 x 61 x 3.6mm )
Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. (more than 10 ton)
Providing and planting BRUSH TREE including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan .including cost of soil filling and size of 5' to 6'
Providing and planting TABEBUIA ROSSIA including excavation 450 X 450 X 450 MM , back filling, pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 5' to 6'
Providing and planting KACHANAR including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan..including cost of soil filling and size of 5' to 6'
Providing and planting PINK CASIA including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan ..including cost of soil filling and size of 5' to 6'
Providing and planting PINK BI FLORA including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan .e.including cost of soil filling and size of 5' to 6'
Providing and planting KADAM including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling and size of 5' to 6'
Providing and planting FOX TEL PAM including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling and size of 8' to 10'
Providing and planting EXZORA RED including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2'
Providing and planting EXZORA PINK including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2'
Providing and planting AKELIFA including excavation 300 X 300 X 300 MM, back filling , pest control treatment,leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2'
Providing and planting TIKKOMA GAURICHORI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT
Providing and planting CHANDNI DRAFT including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT
Providing and planting CHANDNI BERICUT including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT
Providing and planting JET-ROPA DRAFT including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT
Providing and planting RAT RANI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT
Providing and planting HAMELIA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan . .including cost of soil filling 1' TO 2' FT
Providing and planting TIKKOMA CAPANSIA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan . .including cost of soil filling 1' TO 2' FT
Providing and planting KARAN DRAFT PINK including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT
Providing and planting PARAS including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT
Providing and planting MADHUKAMINI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT
Providing and planting MOGARA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT
Providing and planting KADVA MEHDI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' . FT
Providing and planting PHYSUC including excavation 300 X 300 X 150 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling.HEIGHT 1' . FT(GREEN COLOUR)
Preparing structural design of RCC Under Ground / Partially under ground / above high ground level Reservoir of required capacity as per relevant I.S. standards and constructing the same, including excavation in all types of soil strata (including rock)including shoring strutting if required, for loose soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff at all lead. Including cement plaster in CM 1:2 with approved water proofing compound to all over inside container (i.e. walls, base, top slab/dome bottom etc. all). Including all typesof labour and material charges of lowering, laying, erecting / hosting and jointing of pipe assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design. Providing and fixing accessories, CI Manhole frame and cover, water level indicator, adequate cowl type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for valves. Providing and applying three coats of cement paint / snowcem to the out side face of structure. It also includes satisfactory water tightness test as per relevant I.S. code and painting name of scheme and capacity on the tank as per direction of engineer in charge. Cost of 100000 litre
Designing structurally (and aesthetically) complying provisions of relevant Indian standards and constructing RCC Elevated service Reservoir of the following capacity and height , using latest Soil Investigation Report of proposed site , Seismic zone, Wind speed Zone. Including (1) Container shape any suitable type(or as specified), (2) Staging consisting of column brace trestle / shaft / combination column- brace trestle and shaft as appropriate(or as specified) and (3) Appropriate foundation system. This includes excavation in all types of soil strata(including hard rock), casting100 mm thick P.C.C. levelling course in M-10 , Refilling the pit with proper soil and disposing of the surplus stuff at all required lead. (4) This will also include cement plaster in CM 1:2 with approved water proofing compound all over inside container (i.e. walls, base, top slab/dome bottom etc. all).. (5) All types of labour & material charges of lowering , laying, erecting / hoisting & joining of pipe assembly of Inlet, Outlet, overflow, washout and bye pass arrangement as per hydraulic design are including. (6) Providing and fixing of any accessories(specified), CI Manhole frame and covers, water level indicator , lightening conductor, GI Pipe railing around walk way, at roof level, at gallery and around landing of inside shaft, Adequate cowl type ventilators or lantern type ventilator with stainless steel jali. (7) Scope of work includes constructing RCC spiral staircase with adequate tie beams,staircase footing ,Rcc chambers for valves. ventilating shaft and ventilators as well as door in shaft, SS grating to be provided to outlet pipe (inside container) for safety.(8) including providing and applying three coats of cement paint/snowcem (as specified) to the whole structure. (9) It also includes satisfactory water tightness test as per relevant I.S. Code and painting name of scheme & capacity on the tank as per direction of engineer in charge. 75000 litre Capacity
Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50Mt.lead.
Rolling and consolidation of soling including filling in depression which occur during the process, with power roler 8 tonne to 12 tonne.
Watering of earth work as directed.
Suppliying of graded stone aggregate of following sizes (for W.B.M. Road)(1) Hand broken stone aggregate 25mm to 90mm size.
Suppliying and rolling of graded stone aggregate of following sizes (for W.B.M. Road)(2) Hand broken stone aggregate 40 mm to 63 mm size.
Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and gradient (excluding spreading of Blindage)(iii) 25mm to 90mm size crushed stone
Supplying of murrum / binding materials
Providing and laying Tremix design mix cement concrete M-250 in roads / drive ways using 150mm thick pcc,150mm thik rcc in appropriate quantity as per specification, mechanically vibrated using and surface screed vibrators, vaccume pump power floater, power trovel, concrete floor cutter etc. Including steel form work with 150 mm M.S. channel sections incl. proper curing and providing and filling construction joint and dummy joints with "shalitax" primer silflex sheet not less than 20 mm th. incl. rounding the edges and cutting the groove by using concrete cutter in zigzac pattern upto 1/3 depth of the RCC thicknes and not less than 10 mm in width and filling the grooved by dummy joints with bitumen sealing compound of grade-A Including making all necessary arrangments for expansion joints at every 15 mtr's square or as per site situation with filling bitumen etc. complete. Note :- This item includes reinforcement, centering, shuttering, MS form work, necessary tools & plants etc. complete as per structural design given by comsultant and as directed by Engineer-in-charge.
Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (to level or slope) of I.S. class NP2 of following internal diameters.(iii) 600mm dia. (upto 10 ton)
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil
Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter for following diameter of pipes.(iii) 300 mm ,Extra for under reaming inside the bore Holes for under reamed piles of following Diameter.(iii) 300 mm
Providing and laying controlled cement concrete M.250 for R.C.C. bored piles of 1.20 Mt. diameter including ramming, vibrating, curing and finishing complete. (more than 10 ton)
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. (more than 10 ton)
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. (more than 10 ton)
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. (more than 10 ton)
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional (more than 10 ton)
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. (more than 10 ton)
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. (more than 10 ton)
Supply Installation Testing Commisioning of advance perimeter electric fencing with monitoring and controlling having 7“ touch display with 4 zone, buzzer output system with input voltage 12 V DC, input current 500 mA, output voltage 6.0-10 kV (1-Ph), pulse interval 1.2 s, pulse duration 0.3 ms, output energy 2.5 J, hooter 118 dB, lightning diverter, copper mounting box with post, module mounting structure with pole, digital multi meter, H.T wire clutch type 2 mm dia. ACSR conductor wire, etc. for 5’ fence height above ground level, #7 wire rows / stand, 250 mm spacing between wire rows, 7’ total pole height (above & below ground level), MS pipe with GI 25 mm x 25 mm x 3 mm angle support for posts / intermediate poles including nut-bolts, polypropylene corner insulator & intermediate poles insulator, wire tightener, tension spring, joint clamp, cut-out switch, joint clamp, earth kit, warning sign board etc. completed all as specified and directed by the engineer-in-charge. (Note: The item shall be measured and paid for in RM. No separate payment shall be made for any item / material deemed essential for functioning of the electric fencing.)
Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. (a) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [III] For 16A Plug with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (green) earthing wire (a) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories
Providing following type of Modular Type Accessories mounted with pvc / metallic/Wooden box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge (8) Modem Jack for Computer Open RJ-45
Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (K) Three phase 4 way SS Double door PPI type for single phase outgoing horizontal box
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (L) Three phase 6 way SS Double door PPI type for single phase outgoing horizontal box
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (H) Single phase 12 way SS Double door
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (F) Single phase 8 way SS Double door
Miniature circuit breaker single pole 1A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark
Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.
Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 40 Amp.
Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp.
Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (b) 40 Amp.
Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection. [A] Metal Clad Socket with metal clad top
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 4 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (d) 3 wire 4 sq. mm
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 4 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (g) 4 wire 4 sq. mm
Providing and erecting Approved make Ceiling Fan with double ball bearing ISI mark with condenser 230 volt A.C. 50 Hz. 1200 mm Sweep complete having 4 blades Aluminium body and blades sets having ornamental design shakes, canopy & 30 cms. Down rod erected with 24/0.2, 3 core flexible wire with earthing [Make shall be approved by Engineer in Charge]
Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site as original.
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.
Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar.
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.
Providing & erecting fresh air fan 250 mm dia with square frame make of ABS body with louvers
Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [B] 380 mm dia 900 RPM
Supplying and erecting approved make pedestal fan A.C. 230V. 50 Cy/s. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator, & standard lead flexible wires and plug top.
Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.
Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.
Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II) 1980. Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium /approved paint to be erected on / in existing Foundation. The length of poles are as below. (A) 7.5 mtr. Long Swaged Steel tubular pole (i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base plate. (Approximate Pole weight 67 Kg) For burial erection
Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II) 1980. Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium /approved paint to be erected on / in existing Foundation. The length of poles are as below. (A) 7.5 mtr. Long Swaged Steel tubular pole (ii) Add Extra for M.S. Base plate 300 X 300 X 16 mm for pole, Suitable for mounting on surface of foundation with foundation bolts, with required stiffeners welded with pole.
Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II) 1980. Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium /approved paint to be erected on / in existing Foundation. The length of poles are as below. (A) 7.5 mtr. Long Swaged Steel tubular pole (iii) Add Extra for PU base primer and PU Paint on pole.
Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable termination to be erected on suitable foundation (icluded).(L) 11 Mtr. Long 90 mm Top X 190 mm bottom dia, 3 mm thickness with
Providing street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fastners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr
Providing street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fastners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms. [D] Four Arm Bracket 1 Mtr
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 16 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories 4 wire 10 sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 95 Sq.mm.
Supply submersible pump set suitable for bore of 100 mm. dia or more having three phase motor capacity not more than 5 HP with following capacity. (b) 16 stage - 140 to 180 LPM discharge at 96 to 69 mtrs. Head respectively suitable for 50 mm dia. Delivery pipe
Supply and eracting Direct -on line, Starter with 15 A. rating contractor and with 4-14 A. range, directly operated thermal overload relay in sheet steel enclosure for 3 phase 415 V. 50 c/s. A.C motor up to 7.5 HP complete erected on P.W Block with necessary connection
Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S Flat with nut & bolts grouted in wall complete. [A] for 4.5 Kg Capacity
Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall complete. [A] for 5 Kg Capacity
Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook.
Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank
Providing and erecting 3 star and above rated approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) (A) for 1.5 ton capacity
Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity AMF Control Panel for100 KVA/125 KVA3 phase DG Set
Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.
Tirupati Sarjan Limited
API CIVILCON PVT
P.R. Patel and Co.
D.B.Infratech
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid