Widening and Strengthening of Kharkhoda-Kaul-Mundali to GMBS road via Kala Aam (ODR) under state Sector

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm in thickness as per morth clause-201 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Excavation in foundation in mixed soil with moorum,shingle,kankar required the special tools & plants including lift up to1.50 m. and lead upto 30m and including filling watering and ramming of excavated earth into the trenches and the side of foundation trenches or into the plinth and removal ,disposal of suurplus earth.si 251(a)Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Construction of granular sub-base by providing close graded Material, mixing in Place method at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing, laying and spreading of Stablized graded stone aggregate (ETA) after mixing with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying with 1% OPC cement and 3.5% Emuslion in unform single layer on sub-base /subgrade and compacting with the road roller to achieve the desire density.Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.3 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom per morth clause-503 rates are Including all labour, material, T&P, taxes & Labour cess but excluding GST.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG-30)@ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Cement concrete with 2cm guage approved stone grit, coarse sand & cement in proportion of 3:1.5:1 in pavement 10cm /as per design thick for C.C road With 43 grade cement and coarse & fine aggrigate confirming to IS standrad mixed in concrete mixture /Plant of not less then 0.2 cum capicity & appropriate weight batcher using approved mix design, laid in approved fixed form work (steel channel) laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion cloth for curring of concrete pavements for not less then 14 days curring compound (where as specified) and water finishing to lines & grade including supply of all material, labour , tools & plants etc. requried for proper complition of work and also incuding complete shifting of material & concrete etc.As per SI No New Item 9 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Dismantling brick work or stone work in lime or cement mortar and including stacking/disposal of dismantliend materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet).As per UPPWD SOR No 692.Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Dismantling reinforced cement concrete or reinforced brick work including stacking/disposal of dismantliend materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet)..AsPer UPPWD SOR 694 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Back filling with Local sand behind abutment, wing wall and return wall complete as per drawing and Technical Specification & MORTH 710.1.4.of IRC:78 & 2200.Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Plain Cement Concrete in Grade M10 Open Foundation with cement (OPC ) approved coarse sand & two cm gauge well graded grit in 6:3:1 proportion all including necessary shuttering as per MORTH specification 1500, 1700 & 2100 complete as per Drawing and Technical Specifications.Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Plain Cement Concrete with 2 cm. gauge Stone ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work Complete same as S.O.R item 281Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Plain Cement Concrete with 2 cm. gauge Stone ballast, Coarse sand of 1.25 F.M. and cement OPC, in proportion of 4:2:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work Complete same as S.O.R item 279(a) Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

M-150 Brick work in foundation and plinth in 1:4(cement & coarse sand )mortar including all material T&P proper complation of work.etc.305(a)Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

RCC work in Grade M 25 sub-structure & Super structure with cement (OPC) approved coarse sand & two cm gauge well graded grit in 2.1:1 including necessary shuttering placing & binding of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all material , labour , T & P etc.required for completion of work as per MORTH specification 1500, 1700 & 2200.Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications IS-1786 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and laying Cement(OPC) concrete wearing coat M-25 grade for wearing coat (for wearing coat) including reinforcement complete as per drawing and Technical Specifications. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Supply & Fixing of 100 mm dia Drainage Spouts of MS with gratings as per drawing including cost of all materials, labour, T & P etc. required for proper completion of the work as per drawing and Technical specification. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked...As per UPPWD SOR no 644 & 645. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

M-150 Brick work in superstracture in 1:3(cement & coarse sand )mortar including all material T&P proper complation of as item no.307+309 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

12mm. Thick.plaster with cement and coarse sand in 1:3 over brick work including supply of all material, labour,T&P etc. (582.a). Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

M.S. or iron work of small sizes and section such as M.S. Grills / Stair case railing / gates / trusher / racks etc.and holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work..As per UPPWD SOR no 502 (A) .Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Struck cement Pointing with 1:2 cement and fine sand of 1.25 mm mortar including supply of all material T & P etc complete. (SI No. 574). Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Construction of embankment/Patri with approved material obtained from borrow pits with all lifts (Not less than Distance 3 km) and all leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Ref. to Mort&H Specification No.305) including all labour, mateial, T&P taxes and Labourcess, cost of earth and royalty but excluding GST etc.

Supplying, Laying,Fixing and jointing NP-3 Class Hume Pipe 600 mm Dia including all labour, material, T&P, tax. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Supplying, Laying,Fixing and jointing NP-3 Class Hume Pipe1000 mm Dia including all labour, material, T&P, tax. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Constrution of rumble strip (size 250 mm wide & 25 mm thick at center parabolic) on adjoining intersection of road with BC with all material, T&P, material , labour complete as per direction of Engineer in charge. including all labour, material, T&P, tax. Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 .Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and laying of repeated bars with hot applied thermoplastic compound marking 300 wide , 5 mm hieght and 600 mm apart as per IRC-35 as per morth clause-803 the finished the serface to be lable, uniform and free from streaks and holes including all labour, material, T&P, taxes & labour cess but excluding GST. (Repeted bar)Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and laying hot applied thermoplastic compound 2.5 mm thick i/c reflectrorising glass beads @ 250.00 gm per Sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all material , labour and T&P etc as per Table No.803 of clause MORTHRates are including all labour, material, T&P, taxes & labour cess but excluding GST

Reflective Raised Pavement Marker Providing and fixing of raised pavement markers (Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. All T&P/ machine material and labour required for proper completion of work.Rates are including all labour, material, T&P, taxes & labour cess but excluding GST and also as per morth clause-804

M/s Juneja Construction Pvt Ltd

Krishna Infratec

R.G BUILDWELL ENGINEERS LTD.

SHARMA CONSTRUCTION

KRISHNA CONSTRUCTIONS