8130 ADDITION ALTERATION AND SPECIAL REPAIRS TO CG DOCK SHIFT DUTY ROOM CG DOCK COMPRESSOR ROOM FOR C NO 63 YAS DEPT AT ND MUMBAI AND PROVISION OF ENTRANCE PORCH SHED FOR PM DEPT OF ND MUMBAI UNDER GE NW KUNJALI

Amount

Taking down cement plaster of any description hacking for key, racking out joints and scrubbing down with water etc to receive plaster and removing debris outside MD land incl necessary scafolding complete all as specified and as directed

M&L Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed .

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed . (Note: Water proofing compound shall be measured and paid separately).

Supply only integral water proofing compound complete all as specified and as directed

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons complete all as specified and as directed.

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for 18-20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. (Note: colour of granite shall be decided by the GE ).

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed. .

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed. .

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and as directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick complete all as specified and as directed .

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and as directed

M & L for New treatment/Old of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+9 storey of bldg complete all as specified and directed .

M&L for New plastering wall/ceiling preparation and applying two coat of oil bound distemper over a coat 1 to 2 mm thick wall care putty and primer incl preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed .

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and as directed

M&L Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scafolding for high rise bldgs upto G+9 floor complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified and as directed

M&L for (450mm x300mm x 7mm or 600x300x7mm) thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm),but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. Note :Pattern,design and colour of tile shall be approved by GE

M&L for non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc. 0.11 Sqm but n. exc. 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Note :Pattern,design and colour of tile shall be approved by GE

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed.

S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair complete all as specified and directed..

S&F in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap .complete all as specified and directed .

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends.complete all as specified and directed .

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, complete all as specified and as directed

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F 160mm dia bore PVC (SWR) bends any radius complete all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base complete all as specified and as directed.

M&L 25 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in hardstanding laid in alternate panel complete all as specified and as directed.

Complete removal of existing water proofing treatment including taking down of tiles,APP and PCC upto concrete roof surface including cleaning, wire brushing, watering and removal of debris upto 15 Km distance complete all as specified and as directed.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping complete all as specified and as directed..

M&L for applying a coat of bituminous primer conforming to IS-3384 @ 1.20 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. Providing and laying five layered 4 mm thick APP (Atatic poly propylene) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm as specified here-in-after. The APP membrane shall be laid using LPG torch-on-application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorized applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slop towards rain water pipe outlet complete all as specified and as directed. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete.

M&L for cement concrete tiles 25cmx25cmx22 mm thick, machine pressed, (with grey cement & pigments) set jointed and pointed in neat cement slurry in floors over and including 15mm thick bedding layers in CM 1:3 all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed..

S&F in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed complete all as specified and directed..

S&F in repairs 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified complete all as specified and directed..

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed..

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.. .

M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed..

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed..

Removing debris exc 1.50 Km but n exc 20 Km and depositing where directed, in soil outside MD land complete all as specified and directed.. .

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out hard dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

PCC in foundation in 1:4:8 type D2 (40mm garded agg) in foundation filling and mass concrete complete all as specified and directed.. .

PCC in foundation in 1:3:6 type C2 (40mm garded agg) in foundation filling and mass concrete complete all as specified and directed.. .

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

S&F framed work in doors or gates/collapsible gate of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.

S&F 4mm thick polycarbonate roof sheet of required profile with shelf taping screw as view cutter over the framed MS work complete all as specified and as directed .

Material & labour as fixed in repair for Stainless steel decorative railings, staircase (design and pattern as approved) made out of SS pipes, SS flats, SS plates etc. of grade 316 complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed .. Design for stairs/ladders or any others will be as approved by GE.

Material & labour as fixed in repair for Stainless steel decorative railings chains alloy grade 316 having 8mm minimum thickness (design and pattern as approved) as used to connect two stainless steel post with hooks etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block With Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete over 20 mm thick screed bed in Cm 1:6 complete all as specified and directed.

M & L for heavy duty parking tiles ( johnson endura or equivalent make approved by GE )of size n exc 0.50 Sqm of thickness 20-30mm anti skid and max grip complete all as specified and as directed . (Note: Design ,pattern and colour of tiles shall be approved by GE)

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new platered wall surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed

M&L for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed

M&L for name plate of very high Acrylic material sheet (Colour shall be as directed by Engr-in-charge) UV, Moisture, water and Termite resistant and name/Latter are of mirror shine and are made from 3 mm thick Copper/gold color with mirror shine Acrylic sheet (Latter are 3 mm elevated / raised / up from surface) complete all as specified and directed (Note : Colour of acrylic material sheet & design of name shall be approved by GE ).

S & F 3 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding col/beam/ slab to hold ACPcladding etc complete all as specified and directed. (Note:- Colour/ Pattern of ACP sheet shall be approved by GE)

S&F 12mm toughened glass for door, shutter, partition, shelves, etc with and including fitting and fixture such as glass handles, latches, SS studes, fitting for doors pivot etc complete all as specified and as directed.

M&L for glass door lock with latch bolt, dead bolt & stike plate of ( S/s OSSPL -ML-111N standard SSS or equivalent make approved by GE) in the middle of the door complete all as specified and as directed.

Removing debris exc. 1.50 Km but n exc. 20 Km and depositing where directed, in soil outside MD land complete all as specified and as directed.

M & L for point wiring in repair with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for One light point controlled by one switch

All as per ite,m No. 74 but for one ceiling fan/wall fan/exhaust fan point controlled by one switch complete all as specified and as directed.

All as per ite,m No. 74 but for One 5 Amps switch socket combination on independent board complete all as specified and as directed.

M & L for point wiring in repair with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including suitable size PVC non metalic rigid casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable 2.5 sqmm as earth continuty conductor, connecting to common earth dolly including required nos and size of modular box with cover plate frame in any module complet necessary electrical connections for each work station point comprising of one 5 pin 15 A switch socket combination on same board

M & L for point wiring in repair with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 4.0 sqmm size 1100 volts grade drawn through and including suitable size PVC non metalic rigid casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable 4.0 sqmm as earth continuty conductor, connecting to common earth dolly including required nos and size of modular box with cover plate frame in any module complet necessary electrical connections for each work station point comprising of 03Nos. 5A and 01 No switch socket 15Amps complete all as specified and as directed.

M&L for submain wiring with 2 runs of 10 sqmm and one run of 10 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up complete all as specified and as directed. Note: 3 runs of 10 Sqmm cable and one run of PVC casing & caping shall be measured as one unit.

M&L for submain wiring in repair with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed. Note: 3 runs of 4 Sqmm cable and one run of PVC casing & caping shall be measured as one unit.

S&F LED recess mounted type fitting 36W 2'x2' CRCA LED Slim panel with recess mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified.

Supply and fixing in repair of LED 90W street/building security light fittings with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP 66 protection complete all as specified and as directed.

Supply and fixing in repair wall/surafce mounted 20W LED battern fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block 02 Nos including connecting up with twin core copper conductor cable with suitable size complete all as directed and specified. Make : C&S LTTB4F20WLEDEW BATTERN or equivalent make from list of manufactures.

Supply and fix in repair switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type complete all as directed and specified.

Supply and fix in repair switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as directed and specified.

Supply and fix in repair modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module complete all as directed and specified.

Supply and fix in repair modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module complete all as directed and specified.

Supply and fix in repair ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as directed and specified.

S&F steel sheet enclosure double door type IP54 IK09 protection DB SPN 8 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

S&F steel sheet enclosure double door type IP54 IK09 protection DB SPN 4 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

S&F steel sheet enclosure double door type IP54 IK09 protection DB SPN 12 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

S & F Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 12 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 607735 or Equivalent make from list of manufactures

S & F in repair MCB SPN 63 Amps, 10 KA Rupturing capacity complete all as specified and directed

S & F in repair MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and directed

Supply and fix MCCB, 415 volts, 4 pole of cap 160 Amps, 35 KA, ICS = 100% ICU complete all as specified and directed. Make - Legrand cat part no 420017 or Equivalent make from list of manufactures

S&F Exhaust fan of size 380mm sweep complete set with PVC body and louvers connecting up including provn of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan including taking down old unsv fan complete all as specified and directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof complete all as specified and directed. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

S&F wall fan 400 mm sweep rated 230 volt 50 HZ AC supply single phase PVC body including accessories and connection with flexible wire three core for phase, neutral & earth, including taking down old unsv fan and transport to MES store and making good disturbed surface complete all as specified and directed..

S&F ceiling fan 1200 mm sweep BLDC , BEE 5 star rated 230 volt 50 HZ AC, having air delivery 220cum/min, 350 rpm supply single phase including accessories and connection with flexible wire three core for phase, neutral & earth including taking down old unsv fan and transport to MES store complete all as specified and directed.Make: Baja cat No. Energos 35 neo or equivalent make from list of manufactures

S & F 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.make -Legrand Cat part no -507814, or equivalent make from list of manufactures

Supply and fixing LED bollard, IP65/IK 10 having following features Product Features RNS ID : RS025843 Brand Name : Philips Part Number : BCP400 LED09 T CW PSU GR S1 Lumen (lm/W) : 900 Color Temperature : 6500 Product Name : Outdoor Luminaires Frequency : 50 Hz IP Rating : IP65 Power (W) : 17 Series : City Cube Bollard Colour : Grey

Rohit Enterprises (BID ID -3099402)

Pragathi Infrastructure Co. (BID ID -3115911)