Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-Finance H NO 501 DEEPAK VIHAR KHORA COLONY GHAZIABAD U P PIN CODE 201020 | GHAZIABAD | GHAZIABAD | UTTAR PRADESH | 201020 | ₹1.2 L | L1 | Accepted-Finance ok |
| 2 | L2₹1.5 L+₹28,875.39 (23.2%)Accepted-Finance H NO 309 26 MANOHAR NAGAR GURUGRAM 122001 | GURUGRAM | GURUGRAM | HARYANA | 122001 | ₹1.5 L+₹28,875.39 (23.2%) | L2 | Accepted-Finance ok |
| 3 | L3₹1.6 L+₹32,976.63 (26.4%)Accepted-Finance | ₹1.6 L+₹32,976.63 (26.4%) | L3 | Accepted-Finance ok |
Tender Value
₹1.7 L
EMD Value
₹3,340
Closing Date
11 May 2026, 5:00 pmClosed
VIMAL DEEP
DIV 4 Gurugram
flush door, pipe sanitary item and plumbing works
2026_HBC_518716_1
20260BB0D9A7 0204 443E BE70 10D34BC0011F255HSV
Open Tender
Civil Works
Works
90 days
Gurugram
2 documents required · 2 mandatory
₹250
₹3,340
Yes
12 May 2026
30 Apr 2026
12 May 2026
30 Apr 2026
11 May 2026
30 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | [12.36.1]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 10 | Sqm | 2,385 | ₹23,850 |
| 2 | [12.91]Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. | 5 | Each | 657 | ₹3,285 |
| 3 | [22.1.1]Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 1. White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 5 | Each | 2,027 | ₹10,135 |
| 4 | [22.106.1]Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1. 15 mm nominal bore | 20 | Each | 457 | ₹9,140 |
| 5 | [22.107.1]Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore | 9 | Each | 508 | ₹4,572 |
| 6 | [22.108.1]Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore | 5 | Each | 444 | ₹2,220 |
| 7 | [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 10,000 | Litre | 7 | ₹70,000 |
| 8 | [22.22.1]Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 4 | Each | 3,493 | ₹13,972 |
| 9 | [22.24.1]Providing and fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern and C.P. flush bend with fittings and C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 1. W.C. pan with ISI marked white solid plastic seat and lid | 3 | Each | 4,386 | ₹13,158 |
| 10 | [22.86.1]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 1. 15 mm nominal outer dia Pipes | 20 | Metre | 205 | ₹4,100 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.89 MB
BOQ_597605.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .