NIT NO:1084 /TC/2026-27

Supplying, Installation, Testing and Commissioning of dual view X-Ray Baggage scanner Inspection System mounted on castor wheels capable of passing through bags of dimensions 600 mm (W) X 400 mm (H), belt height 750 mm to 850 mm, 22”/24 LCD Monitor, Input / Output rollers with frames as per attached specification etc. as required.

Supplying, Installation, Testing and Commissioning of Door frame metal detector 20 zone or above Door frame Metal detector nominal Size: 760 mm (W) x 2050 mm (H) x 700 mm (D) loaded with necessary software as per attached specification etc. as required.

Supplying, Installation, Testing and Commissioning of Flap barrier made primarily of SS-304 stainless steel, bi-directional, following channel/passage width, Obstruction height N.S. 1200 mm. Single pass, pass speed of minimum 40 persons per minute and the flap barrier should be equipped with drop box along with a counter and a SCOSTA Card Reader for the collection of visitor cards as per attached specification etc. as required.Channel/passage width of 550 mm

Supplying, Installation, Testing and Commissioning of Motorized card retrieval pedestal (Drop Box) reads any ISO proximity or smart cards, using integrated third party reader, motor type : DC, with bin collector of capacity of 50 to 60 cards & one extra bin for transport of card etc. all related civil work i.e. excavation, cement concrete work, foundation work required as per specifications and OEM standard norms etc. as required at site.

Supplying, Installation, Testing and Commissioning of SAM Based SCOSTA Biometric-cum-smart card reader supporting up to three- factor authentication. Support card/biometric fingerprint, card/PIN or card/fingerprint/PIN. 13.56 MHz credential compatibility, ANSI - 378 template stored on smart card credential and verified on reader. Suitable for mounting on surface/wall or as per site condition including as per attached specification etc. as required. Note:- Item no. 5 & 7 i.e. SCOSTA biometric cum smart card Access Control System and Face Recognition Access Control System required to integrated. The integrated system/device with both systems integration in one device in also acceptable.

Supplying, Installation, Testing and Commissioning of 4 readers intelligent access control controller through master/ slave architecture (optional), TCP/IP, IPV6, SNMP V3, 2 lac card holder capacity, 2 lac transactions buffer, 32 access level as per card holder, OSDP secure channel, Supports 4 readers (OSDP) per controller (IN/OUT reader combination) as per attached specification etc. as required.

Supplying, Installation, Testing and Commissioning of SAM based SCOSTA Face Recognition access control terminal with SCOSTA Smart Card controller having minimum 8" TFT IPS LCD Display with Capacitive Touchscreen supports Walk Through Face authentication & verification from 0.3 meter to 3 meters, can be integrated with Fingerprint Reader, QR Code Reader without any additional IP requirement, 256 bit encrypted algorithm to protect important information such as personal information transmitted as per attached specification etc. as required. Note:- Item no. 5 & 7 i.e. SCOSTA biometric cum smart card Access Control System and Face Recognition Access Control System required to integrated. The integrated system/device with both systems integration in one device in also acceptable.

Supplying, Installation, Testing and Commissioning of work station processor: i5, dual core with 21.5" LCD Panel,2.4 GHz;3.0 GHz with turbo boost or better, L3 Cach: 3 MB or better, Memory 16 GB DDR4 RAM, Storage; Min 1TB SATA HDD, Operating System; Pre-load with windows 10/11 pro 64bit OS, Network; 2x10/100/1000 Mbps network interface as per attached specification etc. as required.

Supplying, Installation, Testing and Commissioning of Stainless steel Pole for TV Panel made on 73mm OD x 65mm ID ss tube (304) in brushed finish with hang bracket for TV unit as per attached specification etc. as required.

Supplying, Installation, Testing and Commissioning of Client License application per Flap barrier for photo pop up display, screen resolution 1920*1080, information will be displayed on screen with employee/visitor related fields. Supports provision for one dynamic image to change as per National/Global event (image size fixed). Supports one dynamic line in the bottom for the generic message / information to display on bottom of screen etc. as per attached specification etc. as required.

Supplying, Installation, Testing and Commissioning of Integration Server HPE ProLiant DL380 Gen10 server with one Intel® Xeon® Silver 4210R processor, 32 GB dual rank memory, 8 small form factor drive bays, P408i-a Controller with Battery, one embedded 4 x1GbE Network Adapter, SFF Easy Install Rail Kit, Cable Management Arm Kit, 800W power supply with 22" Monitor etc. as per attached specification etc. as required.

Supplying, Installation, Testing and Commissioning of RFID Card Printer - Resolution 300 dpi or better Accepted card size CR-80 Card Type RFID, MiFare Print method Dye sublimation / resin thermal transfer Dua1 Side Card Printer Required With graphics background Colors Up to 16.7 Million / 256 Shades per pixel Print Area CR-80 Edge to Edge Accepted Card 0.009”— 0.040” / 9 mil — 40 mil / 0.229 mm — 1.016 mm Input Hooper Interface 100 — 150 Cards Card Cleaning Card cleaning roller integrated in to ribbon cartridge; Interface USB 2.0 optional Ethernet with internal print server Software Driver for Windows 7 and Windows 10 Card Printer Design and Data Entry Software.

Supplying, Installation, Testing and Commissioning of HHMD ( Handheld Metal Detector ) Following Specifications 1. Dimensions: Length: 400mm (Max) Handle width: 40mm (Max) Body thickness: 35mm (Max) Search Probe Area: 150sq. cms (Min) 2. Weight: Not more than 325gms (Max) including batteries. 3. Power Source: Should work operate commercially available rechargeable 9V battery. Should operate for minimum 80hrs on single recharge. 5. Indication (a) Single LED based audio & visual indication for: (i) POWER ON – Normal Light (ii) METAL DETECTION – Bright Light (iii) LOW BATTERY INDICATION – Flashing Light 6. Operation: Single push button operation. 7. Construction: Should be rugged and Impact resistant ABS moulded casing. 9. Detection: Should be able to detect Ferrous and Non Ferrous metals. - Pistol.22 at min 6” - Cartridge.22 at min 2” - Razor Blade at min 1” 10. Tuning:Automatic to ensure detection of wide range of metals and alloys. 11. Temperature: The HHMD should work satisfactory in temperature range of -10 Deg C to +55 Deg C and humidity of 95% non-condensing. (Supported by Test Certificates from NABL accredited laboratory) 12. Safety: a)MagneƟc field should be harmless to magneƟc media , electronic devices and should be film safe (Supplier shall submit test cerƟficates from national/international accredited lab) b)HHMD should be harmless to pacemaker and pregnant woman (Supplier shall submit test cerƟficates from naƟonal/internaƟonal accredited labs as per ICNIRP guidelines ) 13. Certifications CE Certifie

Supplying, Installation, Testing and Commissioning of WEb Camera following specification VMS software is web based supported software to create & manage visitors and their appointments. 2 Creation and Updating application users should be provided. 3 Provision to schedule and preschedule appointments through VMS. 4 Provision to assign access rights to the Application users and create admin. 4 Software should support Single day and multiday appointment creation. 5 Time-based access should be provided. 6 Provision for Visitor Pass generation. 7 Visitor entry pass shall contain following information: · Organization name & Logo · Name · Company · ID Number · Address · Mobile Number · Visit Purpose · To Visit (Officer/Employee) · Escort name (if present) · Meeting Location · Date · In Time & Out time (Check In /Check Out) · Signature of issuing authority · Photograph · Signature officer/ authority · Appointment ID · Organization name & Logo · Remarks 8 Authorized employees must be able to create visitor appointments. 9 Provision of Approval and Disapproval of the appointment by the Admin. 10 Provision to generate Reports of the Users. 11 Provision of generating check In/ check Out reports of the Visitor 12 Report generation of incomplete Visit (Check In completed but Check Out not completed) 13 Visitors Not visited reports provision.

SITC of 10KVA double conversion online VFI-SS-111 UPS with 1 hour Backup, Output power capacity - 8000W, Waveforme - Sinusoidal, Input Voltage: 230VAC, Input Frequency: 50-60 Hz ± 5% auto sensing, Input Voltage range: 110 V-300 VAC @ 50% load, Input Power factor>0.99, THD of input current<10%, Output Voltage: 220 VAC/230 VAC/240 VAC ± 1%, Output Frequency: 50 Hz ± 0.1 Hz, Frequency synchronization: 47.5 to 52.5 Hz, THD of output voltage<3% Linear load & <5% Non-linear load, Converter mode: Yes, Configurable bypass: Yes, with LED + LCD Display and without isolation transformer & with 16x42AH Battery.

Supplying, Installation, Testing and Commissioning of Under Vehicle Surveillance System (UVSS) with All required Fittings and accessories complete as per attached specification. All related civil work i.e. excavation, cement concrete work, foundation work required as per specifications and OEM standard norms etc. as required at site

Supplying, Installation, Testing and Commissioning of Tyre Killer / Shredder Electrohydraulic type, of following blocking width Spike distance 200 mm; Blocking height 450 mm at angle of 60°; Spike height 400 mm incl. 200 mm high base; Dia of spike- 25mm, speed of uplift & lowering- 2 seconds, mains power supply should be 440/230 V AC, etc. as per attached specification. All related civil work i.e. excavation, cement concrete work, foundation work required as per specifications and OEM standard norms etc. as required at site.5 mtr blocking width

Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in surface complete as per specification and IS: 9537 (2000 Part 5) 2.15.1 - 20 mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010) - 3.11.3 - 3 x 1.5 sq. mm

3 x 2.5 sq. mm

Supplying and fixing metal clad busbar chamber made of 2.0 mm thick CRCA MS powder coated sheet with 4 strip aluminium alloy or wrought aluminium busbars of following capacity and length, complete with all accessories, including earthing the body etc. as per specification. 7.6.1 - 100 amps x 300mm long

Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board consumer unit of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) 9.3.1 - 2 + 4 way

Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.10.1 -6 amps to 32 amps

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)

Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification.

Excavation for foundation in soft soil/hard soil including dressing of sides and ramming of bottoms, lifting and getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres

Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.3.23 - 4 x 16 sq. mm.

Supplying , installation , testing and commissioning of 24 Port Non PoE Managable Giga Byte Switch 10/100/1000 24Port Gigabit Managed L3 Network Switch with 4 Gigabyte SFP Port

Supplying, installation, testing & Commissioning of Media Convertor 10/100/ 1000 gigabit with specification TP Port Rate-10/100Mbps N-Way Auto-negotiation, Fiber Port Rate - 100Mbps Duplex Mode - Full-Duplex / Half-Duple N-Way Auto-negotiation UTP Ports -RJ-45 UTP Fiber Ports -SC Distance - 0~2 Kms LED Indicators - TX LINK, FX LINK, TX ACT, FX ACT, PWR, FDX. Power Requirement - 5VDC 2A Ambient Temp.- 0~60°C Humidity : 5%~90% FCC Part -15 Class A & CE Marks

Supplying, installation, testing & Commissioning of SC-SC Patch Card Length up to 2 Mtr. for Optical Fiber Connector Type- SC / ST / FC / LC, MTRJ, Optical Fiber- Corning single-mode G652D, G657A, G657B, Cable Type- PVC & LSZH on request 0.9mm/2.0mm/3.0mm Simplex & duplex, Cable Color-yellow, Insertion Loss-≤0.2dB, Max. 0.3dB, Return Loss->PC≥45dB, UPC≥50 dB, APC≥60dB, Fiber Height-±100nm, Connector Ferrule Ceramic, (MTRJ: PS- Polyphenylene Sulfide )

Supplying, Installation, Testing and Commissioning of CAT 6 Patch Cord Length up to 2 Mtr. with specification of 4 Pairs Unshielded Twisted Pair (UTP) Cable, Conductor Metal: Bare Copper Conductor , 24 AWG, Insulation Material: HD-PE, Jacket Material: PVC UL94V-0, Heat-resistant: 60 degree C minimum , Flame property: The purpose of the vertical flame test is to screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) standards.

Supplying & laying of 4 core Optical Fiber Cables for 9/125 Ohm Single mode installation , Om3 type suitable for 10Gb Ethernet Network bend Insensitive , Aqua LSZH Sheath , glass strands Euro class Tiger- buffer 900, Colour code for tag compliant with EN 50173-2 and ISO-IEC 11801 standard , Except for Tight-Buffer Om4

Supplying , Installation ,Testing & Commissioning Of 32 GB SD Card Flash Memory Type Micro SDHC, SDXC Memory Storage Capacity 32 GB Compatible Devices Tablet, Camera, Smartphone, multi Colour Printer ,Special Feature X-Ray Proof, Water Proof, Temperature Proof, Drop Proof Read Speed 120 Mega bytes Per Second.

Supply Installation Testing & Commissioning of 6U Outdoor Rack Technical Data: DIN Std. 10mm Sq. Slots Basic Frame Construction Top & Bottom Cover Front Door 19 ”Mounting Angle Std. Equipment Mounting Standard Finish Rack Standard load capacity - upto30 Kg (Uniformly distributed in U Space)/ 2KG Per U

Supply Installation Testing & Commissioning of 42U Rack. Outdoor IP55 security rack cabinet for floor mounting. Contains 42U high rails in a19" rack format compatible with any Rack-type accessory. Box or cabinet prepared to place on the floor. Front door with triple point locks to prevent unauthorized access or vandalism Cabinet with IP55 protection, dustproof and complete protection against solid objects. Secured against jets of water projected from any angle. As an optional accessory, a module with 4 fans can be mounted on its upper part. It has side vents for proper ventilation. At its base it has a plate with glands for the passage of wiring. Load capacity up to 600 kilos.

Supplying and Laying of 6 Core Armoured / Outdoor Optical Fiber cable Generally confirming to EIA/TIA 568-C.2 and IEC/ISO11801 Excellent Margin with suppression of Cross Talk (NEXT) 4 Pair Separator Design 23 AWG cable For Outdoor installation With Laying Cable Underground With Suitable Size PVC Conduit/Casing Capping and Other Accessories as per requirement.

Supplying , Installation, Testing & Commissioning of Fiber Patch cord / Pigtail cable LC / UPC, LC / APCIL =< 0.3dB RL >= 50dB LC 2.0/3.0mm Simplex Patch Cord LC 2.0/3.0mm Duplex Patch Cord Options with multimode OM3, OM4, OM5 and single-mode OS2 G.657 Length up to 2 Mtr.

Supply, Installation , Testing and Commissioning of OFC Junction Box Fully Loaded fiber Optic Joint Termination Enclosure Box with OFC Splicing Tray , JC BOX ,Tiffin Type JC Durable Construction: Crafted from robust Plastic, ensuring longevity and protection for fiber optic joints Sleek Modern Design: Blends seamlessly with contemporary setups, Easy Installation: Screw-In installation type allows for Space-Efficient: Includes 5- 10 Fiber Optic Joint Termination Enclosure Boxes, perfect for multi-joint applications.

Supplying and laying Of CAT 6 Outdoor Cable Solid Annealed Bare Copper Conductor. LLD PE/PE Sheath Material For Video Power and Audio Communication With Laying Cable Underground With Suitable Size PVC Conduit/Casing Capping and Other Accessories as per requirement.