Renovation of Gents and Ladies toilet of TERM Cell at fourth floor of Door Sanchar Bhawan, Bhubaneswar.

Amount

Sub-Head : Dismantling and Demolishing

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles upto 25 mm

Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead :

Thickness above 40 mm up to 75 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Credit for taking into possession old materials obtained from dismantling including carriage complete:

Unserviciable GI Pipes/Fiitings

Old Wash Basins of any size

Old Mirrors of any size

Old low level PVC flushing cisterns of any capacity.

Old PVC door frame with shutters

Sub-Head : Concrete Work

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

1:4:8 (1 Cement : 4 coarse sand : 8 brick aggregate 40 mm nominal size).

Sub-Head : Reinforced Cement Concrete

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for :

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Sub-Head : Masonry Work

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.ird course of half brick masonry.

Sub-Head : Cladding Work

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite stone slab all colour and texture except black, Cherry/ Ruby red

Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete

Sub-Head : Wood and P.V.C. Work

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.

Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive.

An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.

30 mm thick pre laminated PVC door shutters

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick.

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

Sub-Head : Flooring

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge.

Size of Tile upto 500x500 mm

Providing and laying premium quality antiskid heavy duty vitrified floor tiles of size 400x400mm, 12 mm thick of approved make (like Duratech of Kajaria or equivalent make) with water absorption less than 0.08%, conforming to IS: 15622, of desired shade and print laid on 20 mm thick bed of cement mortar 1:4 (1 cemenr : 4 coarse sand) excluding jointing and grouting which will be paid for separately, all complete as per direction of Engineer-in-charge.

Providing and laying premium quality digital wall tiles of size 300x600mm, 9 mm thick of approved make (like HD polished wall tiles of Kajaria or equivalent make) conforming to IS: 15622, of desired shade and print laid in approved pattern incuding highlighter tiles in skirting, dado, riser of steps over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigments etc all complete as per direction of Engineer-in-charge.

Sub-Head : Finishing

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Sub-Head : Repairs to Buildings

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Sub-Head : Sanitary Installations

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and laying in trenches unplasticised Rigid PVC drainage pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: (i) single socketed pipes.

75mm diameter

110mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler

Single tee with door

Single tee without door

Bend 87.5 degree

75mm bend

110mm bend

Bend 45 degree

75mm bend

110mm bend

Plain floor trap

P-Trap

Providing and fixing CP brass two way coat hook (heavy type) ACN-1161N of Jaquar or equivalent with CP brass screws etc complete as per direction of Engineer-in-charge.

Providing and fixing 600 mm long glass shelf ACN-1171N of Jaquar or equvalent with 40 mm long stainless steel screws, expandable fasteners etc complete as per direction of Engineer-in-charge.

Providing and fixing CP brass soap dispenser with glass bottle ACN-1135N of Jaquar or equivalent including fixing with stainless steel screws/ expandable fasteners etc complete as per direction of Engineer-in-charge.

Providing and fixing white vitreous china urinal with top inlet in white like "URS-WHT-13257" of Jaquar or equivalent of size 345x320x610 mm including fixing accessories, necessary inlet connections, outlet, spreaders with unions and waste fittings ALD-705/ 705L130/ 709/ 709L130 of Jaquar or equivalent (all in CP brass) fixed with anchor bolt screws etc all complete as per directions of Engineer-in-charge.

Providing and fixing white vitreous china under counter wash basin like "FNS-WHT-40701" of Jaquar or equivalent of size 605x410x200 mm with fixing accessories , single 15 mm CP brass long neck pillar cock CQT-23021 of Jaquar or equivalent with aerator, 32 mm CP brass waste coupling full thread with 80/ 130 mm height ALD-705/ 709/ 705L130/ 709L130 of Jaquar or equivalent all complete as per direction of Engineer-in-charge.

Providing and fixing floor mounted, white vitreous china two piece, water closet (European type) like "OPS-WHT-15753NS250UFSMZ" of size 380x645x805 mm of Jaquar or equivalent brand/make, shape, size and pattern including dual flushing cistern, UF soft close slim seat cover, hinges, conversion bend, fixing accessories and accessories set, in-built P/ S trap etc including making connection with the existing P/S trap/ bend, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with 6 mm thick hard board (marine ply conforming to IS:710) backing including necessary stainless/ CP brass screws etc complete.

Providing and fixing rectangular shaped urinal partition of size 900(H)x450(W) mm with frosted glass 10mm thick like 1810US/1810UC/ JSE-CHR-110US450X of Jaquar or equivalent including two nos. stainless steel brackets/ fittings in each partition all complete as per direction of Engineer-in-charge.

Providing and fixing 600 mm long stainless steel single towel rail like ACN-1111SM of Jaquar or equvalent with 40 mm long stainless steel screws, expandable fasteners etc complete as per direction of Engineer-in-charge.

Sub-Head : Water Supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.

20 mm nominal outer dia .Pipes.

32 mm nominal outer dia .Pipes.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT grating of approved quality and colour.

Circular type.

125 mm nominal dia with 25 mm waste hole.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 30 cm length.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Providing fixing health faucet (ABS chrome plated) ALD-577 of Jaquar or equivalent with 8 mm diameter, 1.0 metre long flexible tube and wall hook with NRV (back flow preventer) including necessary CP brass screws etc complete as per direction of Engineer-in-charge.

15 mm nominal bore

Providing and fixing CP brass 2-way bib cock with wall flange like CQT-23041 of Jaquar or equivalent all complete as per direction of Engineer-in-charge.

15 mm nominal bore

Providing and fixing CP brass angular stop cock with wall flange like FLR-5053N of Jaquar or equivalent all complete as per direction of Engineer-in-charge.

15 mm nominal bore

Providing and fixing concealed stop cock including brass regular body like ALD-089CQT with spindle extension & plastic protection cap and CP brass exposed parts like FLR-5083NK with fitting sleeve, operating lever, adjustable wall flange with seal all are of Jaquar or equivalent all complete as per direction of Engineer-in-charge.

15 mm nominal bore

Sub-Head : NEW TECHNOLOGIES AND MATERIALS

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)

18 mm thick

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

S S MURWAHA