Nagercoil Corporation Providing Borewell at Ward no.44

Amount

Providing Borewell

Drilling of borewells anywhere In Tamilnadu including transporation from one place to anothor with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. by first taking a pil;ot bore of 140mm/150mm diaq anmd then enlarging to required dia direct or reverse rotary mud circulatuionmethored using rotary rigs fuel labour and drilling at site. Site wil be shown by the TWAD Board officers including construction of mud pit only Galaxy drills are to be used. (Drilling of 140/150mm/200mm pilot bore) upto 60mt depth ending below ground level)

PVC casing pipes 150mm CM (with Excise)

PVC casing pipes 150mm CS(with Excise)

Labour charges for inserting PVC casing pipes

50mm Sub Pipe

50mm Adopter

2" Bore clampset

Supply and Delivery of wet type submersible pumpset confirming to IS 8034 with ISI making as per specification. The duty condition detailed hereunder. The motor should be fitted with pump. The pumpset be supplied with 5M suitable flat submersible cable. The pumpset should be delivered to the local body officer or this District icluding packing, loading unloading and transit Insurance etc. The Pumpself supplied should be suitable for errection in 150MM dia borewells 20 lpm x 80m Head 1.5 HP

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps. pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter voltmeter, AMMETER, three pilot (indicating) lamps capacitor single phasing prevent or water level guard and laying and jointing the cables and twin earthing as per IE rules etc. complete and testing the pumpset and trqil run for 10 days.Up to 5HP

Supply and Delivery of wet type Pannel Board confirming to IS 8034 with ISI making as per specification. The duty condition detailed hereunder. The motor should be fitted with pump. The pumpset be supplied with 5M suitable flat submersible cable. The pumpset should be delivered to the local body officer or this District icluding packing, loading unloading and transit Insurance etc. The Pumpself supplied should be suitable for errection in 150MM dia borewells Duty 500-1200/PM x 10-15M 1.50H.P

4sqmm Cable

Nylon Rope

Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification.

2"GI Pipe

T. THANGAPANDIAN (BID ID -1137847)