SPECIAL REPAIR TO BATHROOM OF BLDG NO P-06 AND COOK HOUSE OF BLDG NO P-14 UNDER AGE B/R-I OF GE (N) MAMUN

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed.

Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed.

Refixing shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each in same opening, complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises,complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not specifically provided for, complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for( reinforcement cut as required to facilitate demolition) and rubbish off the premises, complete all as specified and directed.

Dismantling of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting , any gauge and thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified.

Precast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 including necessary moulds/formwork, complete all as specified and directed. Note :- Reinforcement shall be measured and paid seperately under respective items.

RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Formwork to sides and soffits of suspended slab such as roof slab, floor slab, shelves and similar works n. exc. 200mm thick (Horizontal or sloping), finishing the concrete surfaces fair, complete all as specified and directed.

Brick work with fly ash (Old Size bricks) sub class 'B' bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed.

Brick work with old unserviceable bricks retrieved from dismantling straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed.

Brick work with fly ash bricks (Old Size bricks), sub class'B' bricks straight or curved on plan to any radius as in half brick thick walls, built in CM 1:4, complete all as specified and directed.

Brick work with old unserviceable bricks retrieved from dismantling straight or curved on plan to any radius as in half brick thick walls, built in CM 1:4, complete all as specified and directed.

5mm thick rendering on concrete surface of ceiling, chajjas etc. in CM 1:3 finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed.

15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid for separately.

Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately.

20mm thick cement plaster in cement mortar 1:4 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement incl raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

10mm thick rendering on fascia / edging / ceiling of Chajjas, roof projections etc, making the edges in line, in true shape in CM 1:3 and finishing the surface without using extra cement, complete all as specified and directed.

Liquid membrane water proofing treatment over existing RCC roof slab / chajjah / canopy / parapet walls etc to be executed through approved applicator of the membrane manufacturer with following specification complete all as specified and directed :- (a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface and treating the crakes upto 3mm width with single pack fibre glass reinforced crack filling compound of SMART CARE CRACK SEAL (ASIAN PAINTS) or equivalent as approved. (b) Repair all joints and cracks with highly elastic bituminous cold applied putty of tarplastic having penetration upto 8mm levelling of surface to give proper slope (after setting) with roof repair mortar i.e. cold applied Bituminous Mortar & cold emulsion cum waterproofing liquid, Created SSD condition on surface with water, prime the surface with liquid membrane waterproofing elastomeric monolithic acrylic emulsified water based bituminous coating with 200% elongation mixed with potable water in the ration of 1:1 and apply @400gm per Sqm (As per Surface Conditions) (c) Apply first coat of Liquid Membrane Waterproofing Elastomeric Monolithic Acrylic Emulshified Water based Bituminous Coating having elongation 200% conforming to ASTM-C-412, having cracks bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50 mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm, laying of Geotex of 45 GSM/ Fiber mesh simultaneously and paste it properly with overlap of 50mm & allow the first coat to dry for 10 to 12 Hrs .

(d) Apply 2nd coat on poured first coat with consumption @700 gm per Sqm in opposite direction of first coat by Brush or Roller and allow it to dry for 10-12 Hrs. (e) Ensure final curing time of 36 Hrs before allowing/ carrying out any further work. (f) Conduct ponding test after 7 days, continnue curing of 14 days. (g) Apply two coats of UV Resistant Elastomeric Exterior Axcrylic Weather risistant water proof coating having elongation of 300% confirming to ASTM-D-6083 for UV Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membranc to give life and prevent its deterioration from sunlight. NOTE :- (a) The Application of water proofing treatment will be executed by the authorised applicator only after necessary approval from GE. (b) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (c) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be included this fact into account and no extra payment shall be made on this account. (d) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted. (e) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material.

S&F in repair 24mm thick factory made PVC door shutters to existing door frames made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (±0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ceosetory windows & other Frames/chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately).

35mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately).

Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 and making good to disturbed area in same finish, complete all as specified and directed.

Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long-1 No, hinges type B-21 100mm long-2 No. suitable handle-1 No, complete all as specified and directed.

35mm thick, 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. with sash bars, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed.

300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed.

100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed.

100mm long, stainless steel butt hinges, complete all as specified and directed.

200mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

150mm long, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plateand fixed with screws, complete all as specified and directed.

2nd class hard wood (wrought) Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each, complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised steel wire staples (fixed in repairs), complete all as specified and directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples,complete all as specified and directed.

Wire netting of stainless steel wire 0.71mm dia fixed with tinned tacks of stainless steel wire staples,complete all as specified and directed.

4mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

4mm thick figured/frosted glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

3mm thick figured/frosted glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

25mm bore stainless steel, single curtain/drapery rod (wall thickness not less than 1mm) including fancy type PVC brackets, fenials etc suitable for single curtain rod, fixed in repair, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.

Rolled sections in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed.

MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

75mm thick PCC 1:4:8 Type D-2 (40 mm graded stone aggregate) as in sub-base of floors, sub-bases, floors, pavings etc, complete all as specified and directed.

25mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crused stone aggregate) as in floors to recieve floor finishes, complete all as specified.

Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4, complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4, complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, as in skirting/dado etc. set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 to receive tiles complete all as specified and directed.

Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed.

Chequered coloured cement concrete tiles of size 300 x 300 x 22mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 20mm thick screed bed in cement mortar 1:4, grouted flush and jointed in neat cement slurry, complete all as specified and directed.

20-25mm thick machine cut kota stone slab flooring of size not less than over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Baislana zebra marble work 12mm to 15mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick cement mortar (1:4) including cutting moulding, polishing and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including round chamfering to the edges not exc 15 mm wide, complete all as specified and directed.

12mm thick heavy duty Industrial tiles (sqaure/ rectangular), area of each tile exc 0.08 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer mortar in CM 1:4 including dismantling of old tiles of any description with bedding layer of mortar and removal of rubbish complete all as specified and as directed.

Steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed

Refixing of old steel tubing 15mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed.

Steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

Refixing of old steel tubing 20mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed.

Cutting chases for concealed water tubing, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth, complete all as specified and directed.

15mm bore bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule (fixed in repairs),complete all as specified and directed.

15mm bore stop valve/angel valve, chromium plated cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed.

15mm bore concealed type stop valve/angel valve, chromium plated cast copper alloy with long shank and cup, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed.

15mm bore pillar tap, copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repairs), complete all as specified and directed.

Supply, fixing, jointing and testing, 20mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed in repair, complete all as specified and directed.

S & F in repair vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, complete all as specified or erecting stand including 32mm full threaded waste coupling and 32mm PVC waste pipe, complete all as specified and directed.

S & F in repair vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, front or back inlet and foot rests, any pattern including cement concrete bedding, complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including stainless steel or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed.

Vitreous china bowl urinal half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe including providing and fixing of PTMT urinal spreader with 15mm dia pipe, fixed in repairs and fixing 5 litres cast iron automatic flushing cistern, including brackets, complete all as specified and directed.

S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts at both ends of length 450mm for hot and cold water, fixed in repair, complete all as specified and directed.

Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and removing to store, complete all as specified and directed.

Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing to store, complete all as specified and directed., complete all as specified and directed.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges (fixed in repair), complete all as specified and as directed.

125mm size brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe of 15mm dia or union, complete all as specified and as directed.

Sinks with drainage board made of 1mm thick stainless steel kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 750 x 900mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw, complete all as specified and directed.

Chromium plated peg set of 6, powder coated fixed with chromium plated brass screws and woodwn/ plastic cleats, complete all as specified and directed.

Sheet glass shelf assembly 12cm wide consisting of 5.5mm thick glass with CP bracket guard and railing 60cm long including chromium plated brass screws and wooden or plastic cleats (fixed in repair), complete all as specified and directed.

100mm bore sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors with all fittings, complete all as specified and directed.

100mm bore sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls with all fittings, complete all as specified and directed.

75mm bore sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors with all fittings, complete all as specified and directed.

75mm bore sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls with all fittings, complete all as specified and directed.

50mm bore sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls with all fittings, complete all as specified and directed.

100mm dia cast iron bends, diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

100mm dia cast iron bends, diminishing pieces or tapers (larger bore measured) fitted with oval access door, complete all as specified and directed.

75mm dia cast iron bends, diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

75mm dia cast iron bends, diminishing pieces or tapers (larger bore measured) fitted with oval access door, complete all as specified and directed.

100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door, complete all as specified and directed.

75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door, complete all as specified and directed.

75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed.

50mm bore cast iron cowls, complete all as specified and directed.

100mm bore cast iron swan necks (or off-sets) upto 152 mm projection, fixed in repairs, complete all as specified and directed.

200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with one collar per length of pipe, complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, complete all as specified and directed.

Preparation of old painted sheet surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all specified and directed.

Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash,complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed.

Preparation of old surfaces of walls plastered or unplastered and applying two coats of white wash, complete all as specified and directed.

Preparation of old surfaces of ceiling plastered or unplastered and applying two coats of white wash, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying 2mm thick wall care putty, making the surface smooth & applying two coats of oil emulsion paint over a coat of priming paint , complete all as specified and directed.

Complete removal of old existing treatment of walls and applying 2mm thick wall care putty, making the surface smooth & applying two coats of oil emulsion paint over a coat of priming paint, complete all as specified and directed.

Preparation of new plastered or unplastered external surfaces of wall and chajjas and applying two coats of cement base paint over a coat of alkali-resistant priming paint, complete all as specified and directed.

Preparation of new plastered or unplastered external surfaces of wall and applying applying two coats of antifungal acrylic emulsion exterior weather proof paint, complete all as specified and directed.

Complete removal of old existing treatment of walls, chajjas, fascia etc. & applying two coats of cement base paint over a coat of alkali-resistant priming paint, complete all as specified and directed.

Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.

Point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick MS/GI pressed steel sunken box of adequate size and 3mm thick plastic laminated sheet cover fixed with brass screws complete including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed.

All as per Ser item No 119 here-in-before but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 119 here-in-before but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

Point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with and including 1.2mm thick GI/MS modular sunken box of required size with support frame (inner/outer) for mounting modular switch , sockets etc including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed.

All as per Ser item No 122 here-in-before but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 122 here-in-before but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 122 here-in-before but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

All as per Srl item No 122 here-in-before but for one 15/16 Amp socket point with 3x4.0 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

Modular one way switch 10 Amp, 1 module, front operated complete all as specified and directed.

Modular one way switch 16A, 1 module, complete all as specified & directed.

Modular socket outlet, 6A-5 pin with shutter combined 2 module, 230 volts complete all as specified and directed.

Modular socket outlet, 6A/16A-5 pin with shutter combined 2 module, 230 volts complete all as specified & directed.

Modular fan step regulator suitable for 1200/1400mm sweep ceiling fan hum free 100W, 120W - 2 module including necessary connection, complete all as specified & directed.

Switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed.

Switch piano flush button with shutters single pole one way 15/16 Amp 240 volts complete all as specified and as directed.

Socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutter, 240 volts complete all as specified and as directed.

Socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed.

Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings, complete all as specified and directed.

LED lamp 12W, 230V retrofit suitable for lamp holder as reuired, complete all as specified and directed.

LED lights fitting, 1x20W, 4' long 220V, 6500 K, AC, intenso LXS LED batten, wall mounted, PF-0.95, 25000 Hrs life, aluminium housing, pe-wired internally with all accessories, driver including LED tube light and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

LED light fitting 1X10W bulkhead luminaires, energy efficient wall mounted, pressure die-cast aluminium housing & enclosed with polycarbonated cover including LED light driver holder complete with all accessories and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Taking down carefully unsv copper/aluminium sub main wiring of any size including old broken steel/PVC conduit, removing materials to store for keeping in safe custody for taking credit complete all as specified.

Sub main wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor cable green colour of size 6 sqmm as earth lead in & including concealed rigid medium grade PVC conduit medium grade not less than 25mm dia ISI marked with all accessories and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as required at site or directed.

Replacement of MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 100 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.

Replacement of MCB DB, TPN, 4 way sheet metal enclosures double door 415 V AC, 50 Hz AC with IP 43 and IK 09 rating 200 Amps having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.

MCB, TPN, AC, 415 volts "C" series capacity of 40-100 Amps, 10kA and making connections, complete all as specified & directed.

MCB, SPN, AC, 240 volts "C" series capacity of 32 Amps, 10kA and making connections, complete all as specified & directed.

MCB, SP, AC, 240 volts "C" series capacity of 6-32 Amps, 10kA and making connections, complete all as specified & directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amps single pole MCB, complete all as specified & directed.

LED street light fitting 60 watt 230 V AC outdoor type with high pressure die-cast aluminum hosing, PC diffuser, and heat resistant complete with integrated electronic driver with high efficiency including 32mm bore GI pipe bracket mounted on wall or roof using clamps, nuts, bolts, washers, fasteners etc.complete with polycarbonated cover, IP 65/66 protection and connecting up with three core flexible copper conductor cable of suitable size incl taking down old unsv fitting, complete all as specified and directed.

1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 sqmm nominal cross section 4.0 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers incl taking down old unsv cable, complete all as specified and directed. Note- Earth work and protection work shall be measured and paid for separately under respective items of BOQ.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth for laying of pipe,cables, foundation of poles or stays, for re-routing of cables complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in depth, complete all as specified and directed.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified and directed.

Sand cushioning to under groudnd cables in layers of sand of 23cm thick (8cm before laying the cable and 15cm thick after laying cable) in trenches complete as specified and directed. Note: Only punned thickness of 18cm shall be measured and paid.

Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all ad specified and directed.

40mm dia GI tubing, light grade with all fitting laid in trenches or fixed on wall or along pole complete for protection of electric cable/strip, complete all as specified and directed.

Earthing complete in repair with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

M/S RANBIR SING AND CO (BID ID -3351196)

GANDOTRA CONSTRUCTION CO (BID ID -3353788)

M/S NARESH KUMAR SHARMA (BID ID -3354105)

s k construction co (BID ID -3361899)

RD Engineers (BID ID -3361816)

M/S HIMANSHU BUILDERS (BID ID -3354020)

M/S BHOTO AND CO (BID ID -3351309)