COMPREHENSIVE MAINT OF MISC STRUCTURAL REPAIR DAMPNESS LEAKAGE SEEPAGE ROOF TREATMENT FLOORING REPAIRS TO COLUMNS FINS FACIA RAINWATER PIPES FLOORING PLASTERING PLINTH PROTECTION INTERNAL WS LINE WCS WHB, PVC DOORS WATER TANKS AND INTERNAL ELECTRIFI

Amount

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and as directed.

All as per item No. 1 above but 20mm dia complete all as specified and as directed.

All as per item No. 1 above but 25mm dia complete all as specified and as directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.

All as per item No. 4 above but 20mm dia complete all as specified and as directed.

All as per item No. 4 above but 25mm dia complete all as specified and as directed.

Refixing of serviceable GI pipes 15mm bore obtained from Item No. 1 here-in-before after cleaning in new or old positions complete all as specified and directed.

Refixing of serviceable GI pipes 20mm bore obtained from Item No. 2 here-in-before after cleaning in new or old positions complete all as specified and directed.

Refixing of serviceable GI pipes 25mm bore obtained from Item No. 3 here-in-before after cleaning in new or old positions complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Refixing of shutters obtained from Item No. 12 above in same opening of any description exceeding 1 sqm each and not exceeding 2 sqm each with old serviceable / with new builders hard ware articles if any complete all as specified and directed.

Taking down old unservicebale steel window/ventilators frame with shutter of any description complete all as specified and directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face ,with particle board core ,supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and directed.

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Materials and labour for treating back of chowkhats etc with tar or coal tar black paint, area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified and as directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing each pane fixed to steel frame(fixed with oil putty and clips)/wooden frame(fixed with Iind cl hard wood beads) including hacking out old broken glass from metal frmae/wooden frame complete all as specified and as directed.

Supply and fix 3mm thick frosted glass, ordinary quality and glazing in each pane fixed to steel frame(fixed with oil putty and clips)/wooden frame(fixed with Iind cl hard wood beads) including hacking out old broken glass from metal frmae/wooden frame complete all as specified and as directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Supply and fix aluminium powder coated glazed or gauged shutter for sliding window (2 or 3 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel,including all necessary fittings such as roller, joining cleats, glazing clips, rubber packing aluminium screw as required etc. complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators (including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix in repair 25mm dia powder coated aluminium curtain rod fancy type( length from 0.90m to 1.5m)with fancy type end side brackets and fancy type hanging brackets complete all as specified and directed.

Supply and fix in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repair chromium plated shower arm 400x25x25mm square shape for wall mounted shower with flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix in repair chormium plated shower 105mm dia round shape single flow with air effect (ABS body and face plate chrome plated with rubit cleaning system) for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix glass shelf 600mm long complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix toilet paper holder with flap recessed type (stainless steel) complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix in repair chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed.

Suply and fix in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed (Model No.BSSBSD-52 of Blue Star/SBSD 05 of Joyna/ Equivalent brand of Prayag).

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

Supply and fix in repair Vitreous china EWC 'P' or 'S' Trap of size 400x365x540mm, white including Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC (excl flushing cistern and flush pipe) complete all as specified and directed.

Supply and fix in repair 15mm bore Bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.

Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 600 complete all as specified and directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix in repair vitreous China wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore PTMT pillar tap, chain, plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fix in repair Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repair 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed.

Supply and fix 20mm bore gun metal, gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Vitreous china half stall semi oval type urinal flat back of size 710 x 330 x 450mm white including chromium plated fancy type urinal spreader with grating and union for discharge pipe and complete incl providing plugs, bedding urinals against wall in CM (1:2), securing urinal to plug with and incl 60 mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe and waste pipe complete all as specified and directed.

Dismantling of old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles 300x200x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 20mm thick plaster in CM (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid compound for concrete and mortar complete all as specified and as directed.

M&L for applying wall care putty 1.50 mm thick and applying two coats of oil bound distemper over a coat of alkali resistant primer on new plaster surface of wall etc complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and directed.

Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction complete all as specified and directed.

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/ plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified and directed.

Dismantling wrought iron for mild steel work for any description not otherwise provided for complete all as specified and directed.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.

Dismantling Asbestos cement / Transluscent ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed.

Supply and fix of pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Supply and fix of pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws as specified complete all as specified and as directed.

Material and labour for providing 40mm thick cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floors, laid in bays, finishing the surface even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) type A1 (1:1.5:3) (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

M&L for reinforced cement concrete (nominal mix) type A1 (1:1.5:3) (using 20mm graded stone aggregate)as in chajja complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for flat rough finished concrete surfaces complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness below or above ground level complete all as specified and as directed.

M&L for Hardcore of gauge exc.63mm but not exc. 100mm ,deposited,spread and levelled in layers n.exc. 15cm thick, watered/ rammed to a true surface complete all as specified and directed.

Material and labour for providing 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed

Material and labour for 300x300 x25 mm thick PCC designer Pre-polished tiles (Factory make and approved size) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floors finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside to store in safe custody or for taking credit including making good of the disturbed surfaces complete all as specified and directed.

Taking down old unserviceable items such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully including making good of the disturbed surfaces complete all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light point controlled by one 5 Amp one way switch complete all as specified and as directed.

All as per item No 103 here in above but for one fan point controlled by one 5 Amp switch complete all as specified and as directed.

All as per item No 103 here in above but for One 3/5 pin 5/6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No 103 here in above but for One 5 pin socket outlet 05 Amp on same board complete all as specified and as directed.

All as per item No 103 here in above but for One bell/buzzer point controlled by one push button same board with other switch or independent complete all as specified and as directed.

All as per item No 103 here in above but for One light point controlled by two 2 way switch complete all as specified and as directed.

All as per item No 103 here in above but for one 15/16 Amps socket outlet but using 2.5 sq mm,copper conductor with 2.5 sq mm PVC insulated single core cable for earth continuity conductor complete all as specified and as directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLS (Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed. Note: Chases cutting and making good to disturbed surfaces shall be measured and paid separately)

All as per item No 110 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 110 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No 110 here in above but for One call bell point controlled by one bell push switch complete all as specified as directed.

All as per item No 110 here in above but for one light point controlled by two 2 way switch complete all as specified as directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed. Note: Chases cutting and making good to disturbed surfaces shall be measured and paid separately)

M&L for cutting chases, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, cills, sunshades sheleves, lintels, etc and cutting chases for concealed water tubing or concealed conduict wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed.

Supply and fix switch piano flush button 5/6 Amp single pole, one way complete all as specified and as directed.

Supply and fix socket outlet 5 Pin, 5/6 Amps flush type complete all as specified and as directed.

Supply and fix Switch socket combination 5 Pin, 5/6 Amp flush type complete all as specified and as directed.

Supply and fix switch socket combination 5 Pin 15/16 Amp flush type with complete all as specified and as directed.

Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified as directed

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and directed.

Supply and fix bell push, flush type 6 Amps complete all as specified and directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed.

Supply and fix in replacement call bell Ding Dong, AC, 230V single pole complete all as specified as directed.

Supply and fix lamp holder PVC polycarbonate type with cord grip cap sutiable for pendant fittings complete all as specified and as directed.

Supply & fix Modular switch, one way, 6 Amp, 1 module complete all as specified and directed.

Supply & fix Modular switch, one way, 16 Amp, 1 module complete all as specified and directed.

Supply & fix Modular switch 2 way, 6A, 1 Module complete all as specified and directed.

Supply & fix Modular Bell push 6A,1 Module complete all as specified and directed.

Supply & fix Modular socket, 6A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix Modular socket, 6A/16A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix Modular fan step regulator, 120 watt, 2 module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 1 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 2 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 3 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 4 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 6 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 8 Module complete all as specified and directed.

Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, FRLS single core, multistranded copper conductor of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC casing caping including taking down old sub main wiring with casing caping complete all as specified and directed. (Note:Two run of 4.0 sqmm copper conductor cable, one run of 4.0 sqmm earth continuity cable and one run of PVC casing capping shall measured as one unit).

Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, FRLS single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old sub main wiring with casing caping all as specified and as directed. (Note:Two run of 6.0 sqmm copper conductor cable, one run of 6.0 sqmm earth continuity cable and one run of PVC casing capping shall measured as one unit).

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (Note:Two run of 4.0 sqmm copper conductor cable, one run of 4.0 sqmm earth continuity cable and one run of PVC conduit shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (i):Two run of 6.0 sqmm and one run of 6.0 sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.

Material and labour for sub-main wiring (Surface type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 10 Sqmm and one run of 10 Sqmm copper conductor as continuity earth wire,drawn through and including PVC Casing Caping (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit as specified and as directed. (Note:Two run of 10 sqmm copper conductor cable, one run of 10 sqmm earth continuity cable and one run of PVC conduit shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.

Supply and fix in repair powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door) 4 way, 240 V with 200 amps rated busbar DIN channel, neutral link & earth link superline complete all as specified as directed.

All as per item No 146 here in above but for 8 way SPN DB complete all as specified as directed.

All as per item No 146 here in above but for 12 way SPN DB complete all as specified as directed.

Supply and fix in repair vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100 A)as incomer including MCCB+12 modules incoming and outgoing make good of damaged surface/wall including re-connection with existing earth wire to DB all as specified and as directed. Note:- MCCB shall be measured and paid separately.

Supply and fix MCCB triple pole & neutral 40-100 amps,,16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed.

Supply and fix MCB single pole & neutral / Double Pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix in repair MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified as directed

Supply and fix in repair GI wire 4.0 mm as earth continuity conductor complete all as specified and as directed.

Supply and fix in repair GI pipe 15 mm bore (dia), light grade for protection of earth electrode complete all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified as directed.

Supplying & fixing LED tube light fitting, 1 x 18 watt bipin holders, connector block etc. complete with and connecting the same to ceiling rose with using copper conductor flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified & directed.

Supply and fix LED light fitting mirror type high output diffuser 2 ft ,10 watt, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of sutiable size complete all as specified and as directed.

Supply and fix round shape 6 watt, 220 volt , AC recessed type with high efficiency PMMA diffuser soft glare free light complete with diffuser, holder, LED lamp sutiable for roof ceiling including connecting up with three core flexible copper conductor cable of sutiable size complete all as specified and as directed.

Supply and fix round shape 12 watt, 220 volt , AC recessed type with high efficiency PMMA diffuser soft glare free light complete with diffuser, holder, LED lamp sutiable for roof ceiling including connecting up with three core flexible copper conductor cable of sutiable size complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm 40 watt, 220 V AC recessed /surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fix in repair LED light fitting, 1x10/1x9 W bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair LED lamp (B22 Base type) of 1x7 W after taking down the old unserviceable CFL/GLS lamp complete all as specified and as directed.

Supply and fixing in repair flame proof 2x16 W/ 20W LED tube light fixture with tube recommended for Gas / Vapor of IIA & IIB and Zone 1 and IP65 Protection complete all as specified and as directed.

Supply and fix in repair contactor with digital type timer switch for street light for 24 hrs operation including connection with existing serviceable DB and programming complete all as specified and as directed.

Supply and fixing in repair LED light fitting 25/35 watt energy saving versatile pressure die-cast aluminium building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and as directed.

Supply and fixing in repair LED light fitting 45 watt energy saving versatile pressure die-cast aluminium building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and as directed.

All as per item no 167 here above but for 60 Watt complete all as specified and as directed.

Supply and fix LED post top lantern with post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection including 20 Watt LED lamp with all accessories and fixing in existing post complete all as specified and as directed.

Supply & Fix in repair modular type power unit 25 amps complete with 4 module plate, starter plug and socket . Make-Crabtree (Sapphire) /Havells / C&S /Bajaj / Havells

Repair to fan: Taking down carefully Ceiling Fans of any make, model and capacity from their existing places for replacement of bush, bearing, Capacitor, servicing i. e. lubricating / Greasing and for rewinding/ painting by dismantling the same and keep the blades, canopy, splitpin and other parts and components in safe custody and hanging / fitting on it's previous position after repair/rewinding/painting/replacement of spares etc complete all as specified and directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of fans or as per existing make of spares, as approved by the GE. (iv) Rewinding and painting shall be measured and paid separately. Existing makes :- Bajaj, Khaitan, Usha, Himadri

All as per item No. 171 above but Exhaust Fans complete all as specified and as directed.

All as per item No. 171 above but Air Circulators wall mounted Fan complete all as specified and as directed.

All as per item No. 171 above but floor mounted pedestal fan complete all as specified and as directed.

Supply only GM Bush for ceiling fan 1200/ 1400 mm sweep/ Exhaust Fan 230/ 300/ 350/ 450 mm sweep/or any type fancomplete all as specified and as directed.

Supply only Ball bearing (cat No. 6201) for ceiling Fan/Exhaust Fan / or any type fan complete all as specified and as directed.

All as per item No. 176 here-in-before but cat No. 6202 complete all as specified and as directed.

All as per item No. 176 here-in-before but cat No. 6203 complete all as specified and as directed.

Supply only capacitor 2.5 mfd, 220 volts complete all as specified and as directed. Make:Tipcon / Universal / Sarda / Usha. / C&S).

All as per item No. 179 here-in-before but 3.0/4.0 mfd complete all as specified and as directed.

Supply and fix in replacement of louver shutter for 300 mm sweep exhaust fan, of existing make, made of MS sheet folded type complete all as specified and as directed.

All as per item No 181 here-in-before but for 450 mm sweep exhaust fan complete all as specified and as directed.

Material and labour for painting by spraying with synthetic enamel paint to Ceiling Fans / Exhaust Fans/ Air Circulators wall mounted Fans/Floor mounted pedestal Fans including Blades/Down rods/ Canopy/Stand, Casing/ Cage and all accessories after preparation of surfce including thoroughly rubbing /cleaning old rusted spot complete all as specified and as directed. Make of paint:- Asian / Berger / Jenson & Nicholson / Shalimar.

Material and labour for Rewinding of ceiling fans armature of 1200 mm /1400 mm sweep of any make & Model with replacing the burnt out winding by new super enameled high grade copper wire of existing gauge and number of turns and all insulating materials including heat vernishing and testing complete all as specified and as directed.

All as per item No. 184 here-in-before but for exhaust fan 230mm/ 300mm sweep, single phase, 230 volts complete all as specified and as directed.

All as per item No. 184 here-in-before but for exhaust fan 450 mm sweep, three phase, 230 volts complete all as specified and as directed.

Supply and fix in repair fan blades for exhaust fan of 300 mm sweep as per existing make and type complete all as specified and as directed.

All as per item No. 187 here-in-before but for exhaust fan of 450 mm sweep complete all as specified and as directed.

Material and labour for lathe work for worn out spindle of ceilling fan /Exhaust Fan/Air Circulators/Wall mounting Fan of any sweep , make & Model with replacing the worn out spindle by new one of existing size and materials including testing for free motion of fans complete all as specified and as directed.

S&F in repair of incoming twin core copper flexible wire ( not more than 45cm) of size 14/0.0076 from ceiling rose to ceiling fan / exhaust fans complete all as specified and as directed.

Supply and fix in repair 3 pin plug top 6 Amps for air circulator wall mounted fan/ floor mounted pedestal fans complete all as specified and as directed.

Supply and fix in repair 5 pin plug top 16 Amps for air circulator wall mounted fan/ floor mounted pedestal fans complete all as specified and as directed.

Supply and fix in repair 2.5 mfd fan capacitor, 220V complete all as specified and as directed.

Supply and fix 50mm bore galvanised pipe 'medium grade’ for fixing ceiling fan including housing/ fixing of GI pipe in wall and also making good the disturbed surfaces complete including taking down old unserviceable pipe complete all as specified and directed. Note :(i)Cost of cutting of wall, if any, for housing/ fixing of GI pipe and also making good the disturbed surfaces are deemed to be included in unit rate.

Supply and fix Wall mounting fan 400 mm sweep, 230V, AC 50 Hz, 1360 RPM with blade set, 3 speed with oscillation and tilt mechanism and mounting accessories complete all as specified and as directed.

Supply and fix Pedestral fan 400 mm sweep, metal body, 3 speed operation, 100W, 2200 RPM , 230V, AC 50 Hz, 1 with oscillation and tilt mechanism and mounting accessories complete all as specified and as directed.

Supply and fix exhaust fan 300 mm sweep, metal body, 230V, AC 50 Hz, copper winding and mounting accessories complete all as specified and as directed.

Supply and fix exhaust fan 250 mm sweep, metal body, 230V, AC 50 Hz, copper winding and mounting accessories all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutters 250 mm sweep, 230V, AC 50 Hz, copper winding and mounting accessories all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutters 300 mm sweep, 230V, AC 50 Hz, copper winding and mounting accessories all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix mild steel rod including fabrication of hook ,size as required at site for hanging the ceiling fan including taking down old unserviceable old rod complete all as specified and as directed.

KAY BEE ASSOCIATES

MASTER BUILDERS

CHOWDHURY SMALL INDUSTRIES

chaklader enterprise

Odessa Engineering Corporation

B G Trading Co.