WELCOME MAINTENANCE IN OFFICER MD ACCN, FAFA QTR AND WELCOME MAINTENANCE OF INTERNAL ELECTRIFICATION AND

Amount

M&L for preparation of old plastered surface of wall and applying one coat of distemper oil emulsion complete all as specified.

M&L for preparation of old plastered surface of wall and applying one coat of white wash complete all as specified.

M&L for preparing old plastered surface of ceiling and applying one coats of white wash complete all as specified and as directed.

M&L for providing wall care putty on surfaces of wall not less than 1 mm thick all as specified and directed by engineer in charge.

M&L for complete removal of existing treatment from old surfaces of walls and applying two coat of distemper oil emulsion complete all as specified and as directed.

M&L for prepration of old painted wooden surfaces of any description, over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified & directed by Engineer-in-Charge

Taking down Cement plaster from brick wall/concrete surface etc incl racking out joint & hacking out for key and scrubbing down with water all as specified

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ /Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L Rendering 10mm thick on fair faces brick/concrete surfaces or surface other than fair face of brickwork in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on ceiling surfaces in cement mortar 1:3 finished even & smooth complete all as specified and directed.

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash on ceiling surface complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of wall care putty not less than 1mm thick complete all as specified and directed.

M&L for repairing the edge / corner of Chajja / roof projection and similar work by removing plaster width / girth not exceeding 150 mm and making good with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified.

M&L for preperation of newly plaster surface of wall/ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

S&F in repair 25 mm dia stainless 304 grade steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. complete all as specified.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in Sqm n.exc 0.50 Sqm in each pane including hacking out old glass complete all as specified and as directed by Engineer-in-charge.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 in each pane including hacking out old glass complete all as specified and as directed by Engineer-in-charge.

Dismantling of stone slab of any description of thickness in floors & aprons etc, laid bedded and pointed in any mortar.

M&L for 18 mm thick Granite black work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:4 complete.

S&F in repairs Plastic water closet seat, anti-microbial snow white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as directed. Make : Cera cat part No 2308 or equivalent.

S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site.

Taking up or down 20mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 25mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

Supplying & fixing to walls and ceiling 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes type 'A' single socketed, in any length with rubber ring joints, fixed on walls with suitable MS clamps complete all as specified.

S&F Vitreous China Urinal, Size 375x320x620mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified. Make:- JAQUAR cat part No SKU URS WHT 132530 or equivalent make in KOHLER/GROHE

S&F Hand jet health faucet 15 mm bore with all connected fittings as approved by Engr-in-charge. Make:- JAQUAR cat part No ALD-CHR-573 or equivalent make in KOHLER/GROHE

M&L in repair Bib cock with wall flange Make:- Jaquar cat part No SKU ARI 39037 or equivalent make in KOHLER/GROHE

M&L in repair Angular stop cock with wall flange Make:- Jaquar cat part No ARI 39053 or equivalent make in KOHLER/GROHE

S&F in repair Bip tap with long body 15mm bore standard of CP any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms)

S&F in repair Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-120gms)

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing all as specified and as directed

S&f in repair 2 way bib cock of superior quality with wall flange 15 mm dia including fixing to pipe complete all as specified andall as specified and as directed

M&L for applying one coat of french polishing to glossy on old surfaces of any description, width or girth including cleaning and preparing the surface

S&F in repairs concealed stop cock reduced body with adjustable Wall Flange for pipe of 15mm bore. Make :- JAQUAR /KOHLER/GROHE.

S&F in repair overhead shower(with Arm) Dia 300 mm round shape single flow (body and face plate stainless steel with chrome finish )with rubit cleaning system. Make :- JAQUAR /KOHLER/GROHE.

S&F in repair Health faucet of superior quality ABS body 1.2 m long flexible tube and wall hook including fixing complete all as specified and as directed. Make : JAQUAR /KOHLER/GROHE.

S&F Swivel shower of CP any colour for fixing with 15mm pipe (min. weight 40gms)

S&F glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F in repair Towel Rack 600 mm long with lower Hangers Make :- JAQUAR /KOHLER/GROHE.

S&F in repair Towel Rail 600 mm long complete all as specified and directed. Make :- JAQUAR /KOHLER/GROHE.

S&F A shower arm 15mm size, 195mm long with bend of 45 degreee with flange of CP.

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed all as sepcified and directed.

S&F in repair Waste coupling 32mm bore of CP (half or full threaded) suitable for urinals.

S&F in repair Bottle trap 32mm bore of CP having min. water seal of 25mm.

S&F in repair Grating doom 100 mm dia of CP.

S&F in repair Towel Ring of CP fixed with & including CP brass screws & wooden/plastic cleats.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm

S&F in repair Tolilet paper holder, vitreous China colour, box type to walls with CP (CP) brass screws

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repair Ball brass valves 15mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule

Dismantling Asbestos cement corrugated/semi corrugated sheets in roof coverings complete.

M&L Asbestos cement two adjustable piece plain angular ridge 6mm thick Fixed with coach screws

M&L 6 mm thick asbestos cement corrugated or semi-corrugated ridge in roof fixed with L-type or J-type cranked hook bolts.

S&F in repair monkey protection type cover for HDPE water tank of capacity 500/1000 ltrs rotating type including nut bolt complete.

S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 900mm x 750mm x 255 mm

S&F in repairs 1000 Ltrs capacity rotational moulded polyethylene water storage tank white/ green triple layered (Cylindrical vertical with close top) hoisted and fixed in position including connections all as specified.

S&F in repairs 150mm length, floor door stopper of brass body, and tongue with hard drawn steel spring

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. Note: Credit for above items shall be made as per schedule of credit.

Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap and making good disturbed surface / wall as per existing complete all as specified and directed

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases( making good all to the disturbed surfaces as per existing) and modular flush metal boxes including cover plate with frame for mounting modular switches, sockets, regulators etc or including sunk cast iron/pressed steel/terminal boxed for mounting flush type switchs/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge , as described below:-

One light/ fan point controlled by one way switch 5 amp complete.

One 3 pin 5 Amps socket point controlled by one way switch on same board.

One 3 pin 5 Amps socket point controlled by one way switch on independent board.

One bell point controlled by one push button on independent board.

One light point controlled by two 2-way switches.

All as per item No. 71 here-in-above but 3pin/5pin 16Amps socket point controlled independently, with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

All as per item No. 71 here-in-above but for 20 Amps of AC enclosure independent, with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified. Make: Cat part No AHFSXXW161 of havells or equivalent.

Supply & Fixing Modular fan Regulator electronic step type, 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified.

S&F switch piano type , SP, one way, flush type 5 Amps complete all as specified.

S&F socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

S&F socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

S&F switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified.

S&F bell push siwtch piano flush type, SP, one way, 5 Amps complete all as specified.

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified..

Supply and fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and fixing Bell Multi Music type, 230 Volts complete with connection all as specified & directed.

Supply and fixing Bell Ding dong type, 230 Volts complete with connection all as specified & directed.

S&F fan Regulator electronic step type complete all as specified.

M & L for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note: Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC conduit shall be be measured as one unit length.

M & L for Sub Main Wiring with two runs single core 6sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note: Two runs 6sqmm, one run of 6sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

S&F in repairs capacitor 2.5 to 3.5 MFD suitable for ceiling fan/ exhaust fan complete all as specified and directed.

Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.

Supply & fix surface mounted bulk head LED light fitting including 10 watt LED lamp B22 base complete with all accessories and connection complete all as specified and as directed.

Supply and fix LED 9 W suitable for normal holder (Base Cap B22) complete all as specified.

Supply and fix LED 7 W suitable for normal holder (Base Cap B22) complete all as specified.

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified.

Supply & fix in repair recess type, 36 watt LED panel light (600x600 mm), colour warm white/cool white/natural white complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.

S&F LED extruded aluminium decorative & cylindrical shape bollard light 9 W with integrated driver with uniform light distribution complete all as specified. Make: Surya Cat part NoSLE BL 9W-BLK800 or equivalent

S&F LED post top light fitting 30W IP-65 rated completeall as specified and directed. Make: Surya Cat part No SLE PT 30W-ETPP or equivalent.

S&F LED Round/square recess mounted slim downlighter 6 watt, integrated electronic driver, colour warm white/cool white/natural white co-related colour temperature (CCT) of 6500K complete all as specified.

S&F LED Round/square recess mounted slim downlighter 12 watt, integrated electronic driver, warm white/cool white/natural white, co-related colour temperature (CCT) of 6500K complete all as specified.

S&F LED Round/square recess mounted slim downlighter 18 watt, integrated electronic driver, warm white/cool white/natural white, co-related colour temperature (CCT) of 6500K complete all as specified.

M&L for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description.

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

S&F MCB distribution board, SPN 2 Way, single door, sheet steel, phosphatised, powder painted with bus-bar 100Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

Supply & fix MCB SPN 63 Amps,' C' series , bracking cap10KA, 240V complete all as specified and directed.

Supply & fix in replacement of MCB SPN 40 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.

Supply & fix in replacement of MCB SPN 6-32 Amps,' C' series, bracking cap 10KA, 240V complete all as specified and directed.

Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' C' series, bracking cap 10KA, 240V complete all as specified and directed.

Supply and fix SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specified and directed Make : Havells or equivalent of Legrand /L&T/ C&S

Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearings, reassembling the fan and blades, painting of fans with synthetic enamel paint by spraying including filling cavities with filler, writing MES No. in paint, hanging/fixing the fan in its original position and testing on completion complete all as directed by Engineer-in-charge. Note: The spare parts (like as bearing, capacitor, rubber wheel bush, fan winding etc) required shall be measured and paid separately under relevant items as supply only.

All as per item No. 116 here-in-before but exhaust fans of any sweep.

Supply only ball / bush bearing as per existing & suitable for ceiling fan / exhaust fan complete all as specified and directed.

Supply only rubber wheel bush with GI bolt, nut and split pin complete all as specified and directed.

Supply only down rod 600/900 mm duly powder coated white with GI bolt, nut, rubber wheel bush and split pin, clamp etc including all accessories for fixing existing fan complete all as specified and directed.

S&F Plastic Surface mounting box 1 / 2 modular gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F Plastic Surface mounting box 3 / 4 modular gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F Plastic Surface mounting box 6 / 8 modular gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately under relevent item of Sch -A

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately under relevent item of Sch -A

M&L for sub main wiring with two runs single core 4sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor including 4sqmm copper green colour earth wire including with use of PVC pipe/Casing-Caping as per site requirement during wiring complete all as directed.

M&L for Modular metal flush box 1/2 Module complete all as specified and directed.

M&L for Modular metal flush box 3 Module complete all as specified and directed.

M&L for Modular metal flush box 4 Module complete all as specified and directed.

M&L for Modular metal flush box 6 Module complete all as specified and directed.

M&L for Modular metal flush box 8 Module complete all as specified and directed.

M&L for modular white cover plate with frame, 1/2 module complete all as specified and directed.

M&L for modular white cover plate with frame, 3 module complete all as specified and directed.

M&L for modular white cover plate with frame, 4 module complete all as specified and directed.

M&L for modular white cover plate with frame, 6 module complete all as specified and directed.

M&L for modular white cover plate with frame, 8 module complete all as specified and directed.

Supply and fix in repairs exhaust fan 300 mm sweep alongwith louvers/front grill, steel body complete, suitable to work on AC, single phase, 230 Volts, 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified.

Supply and fix in repairs exhaust fan 250 mm sweep alongwith louvers/front grill, made of sturdy engineering plastic complete, suitable to work on AC, single phase, 230 Volts, 1200 RPM , 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified.

Supply and fix in repairs ceiling fan 1200 mm sweep complete eith accessories, single phase, 230 volts, including connection with twin core twisted flexible copper conductor cable, complete all as specified and directed by engr-in charge.

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Casing and Caping and its all accessories of suitable size on wall/roof surfaces ( making good all to the disturbed surfaces as per existing) including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing including gang box / 2.0mm thick MS terminal box as per site requirement for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified for:-

One light point/ fan point / bell point controlled by one switch

One 3 pin 5 Amps socket point controlled by one way switch on same board.

One 3 pin 5 Amps socket point controlled by one switch on independent board

All as per item No. 140 here-in-before but with 4.0 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

Taking down carefully service connection of any type complete all as directed by Engineer-in-Charge.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out soft / loose soil complete for laying of cables all as specified and as directed by Engr-In-Charge.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed. Note:- Cost of HDPE pipe shall be deemed to be included in unit rate quoted.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed. Note:- Cost of HDPE pipe shall be deemed to be included in unit rate quoted.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core, laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed. Note:- Cost of HDPE pipe shall be deemed to be included in unit rate quoted.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections complete all as specified and directed. Make : Cat part No DHDLVDRWGOFO04 of havells or equivalent. Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply & fix in replacement of MCCB 125 Amps,' C' series , bracking cap16 KA, 4 Pole, 415V complete all as specified and directed.

Supply & fix in replacement of MCCB 100 Amps,' C' series , bracking cap16KA, 4 Pole, 415V complete all as specified and directed.

M&L for sub main wiring with four runs of single core 6sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall/roof including cutting & chases (making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire all as specified and directed by Engineer-in-charge.

Supply, installing, testing and commissioning of Pressure booster pump, single phase, capacity 1 HP, 220-240 volt, 50 Hz, head range upto 52 M, disharge range upto 140 LPM, type of insulation B class including protection against over current, low voltage, dust and water entry, IP 44 protection complete all as specified and as directed. Make: Kirloskar model No CPBS-73624H/V or equivalent.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

Taking down old unserviceable MCB any type/size as per existing complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable tube light fitting/sketch fittings/bulk head/security light etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for removing the defective fan winding of ceilling fan size upto 1200mm/140mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, soldering, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and directed by Engineer-in-charge.

SHYAMA CONSTRUCTION

M/s Hoti Lal Contractor

VAISHAKHA CONSTRUCTION

M/s Aditya Enterprises

shyam construction

M/S JAGVIR SINGH

M/s DEVI DAYAL CONSTRUCTION CO