SPECIAL REPAIR TO SECURITY FENCING MISC REPAIR TO LIFT WELLS NO 1 TO 6 AND INTERNAL ELECTRIC FIXTURE FITTING AT CMVL UNDER AGE BR I AND AGE EM I OF GE NORTH MEERUT CANTT

Amount

M& L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

S&F mild steel work as for Hand rails, half round or other stock section, nosing to steps in cluding embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.). including necessary riveting and / or welding and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 11-15 mm dia of neck and exc 5cm and n exc 10cm long, complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Supply only 10mm dia round bars in available length as in line wire, cut to lengths, hooking ends etc. conforming to Fe-290 (Gde-165)) complete all as specified and directed Note : 10mm dia mild steel round bars 3 Nos shall be provided horizntly by interwewaving in the chain link and fixed with mild steel screw bolts with MS flat

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

Supply only chain link fencing, MS galvanised heavy zinc coated (Hot Dip) of 4mm nominal dia of wire and mesh of size 75mm x 75mm conforming to IS: 2721-2003 complete all as specified in clause 10.34 on page 214 & 215 of MES SSR - 2009, Part-I and as directed.

S&F fix galvanised iron concertina coil 450 to 600mm dia (1.2kg to 2.20 kg per mtr) complete all as specified and directed

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wie to be measured

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for applying 15mm thick rendering using ready mix plaster bags in CM (1:4) on brick / concrete surfaces of external walls finished even and fair using water proofing compound @ 3% of weight of cement as per manufacturers instructions complete all as specified. Make : Ulteratech rediplast, Birla Aerocon, Note : Contractor is required to deposit ready mix plaster bags of 100% CA quantity to the Engineer-in-Charge within 15 days of issue of work order No 1

M&L for preparing of old decorated surfaces of ceiling ( plastered or un plastered) including cornics etc and applying one coat of white wash complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coat of acrylic exterior emulsion paint (weather proof paint) over a coat of primer including JK Birla wall care putty 2mm thick on walls complete all as specified and direcrted. Note : All work will be carried out by authorised applicator only by use of rollers.

M&L for preparation of old plaster surfaces including complete removal of existing treatment and applying two coat of acrylic exterior emulsion paint (weather proof paint) over a coat of primer including JK Birla wall care putty 2mm thick on walls complete all as specified and direcrted. Note : All work will be carried out by authorised applicator only by use of rollers.

M&L for preparation of old plaster surfaces including complete removal of existing treatment and applying two coat of oil bound distemper over a coat of primer including JK Birla wall care putty 2mm thick on walls complete all as specified and direcrted.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n exc 10 cm width or girth when un connected with other painting in a different tint and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Dismantling of fencing post or struts (wood, steel, RCC) any section , post embedded in concrete , brick work, masonry etc , including taking out embedded portion and making good distrubed ground complete all as specified and directed.

Dismantling of fencing wire mesh of any size any type complete all as specified and directed

Taking down copper/aluminium point wiring (ligh, fan, bell, socket or power etc.) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings etc. for taking credit and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified and directed

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as directed for One light/fan/bell point wiring controlled by one, one way piano type switches 5 Amps complete all as specified and directed

All as per Srl item No 29 here-in-before but one socket out let point 3pin 5 amps on independent board

All as per Srl item No 29 here-in-before but socket out let point 3pin 5 Amps on the same board with other switches

All as per Srl item No 29 here-in-before but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board all as directed.

All as per Srl item No 29 here-in-before but using 4 sqmm copper conductor for with 4 sqmm earth wire for one 20 amps socket outlet on independent board all as directed.

All as per Srl item No 29 here-in-befor but with sunk zinc coated pressed steel terminal boxes suitable for modular fixtures including suitable Modular box, base plate and outer plate all as directed for One light/fan/bell point controlled by one, one way modular switch 06 Amps.

All as per Srl item No 29 here-in-befor but One 06 Amps socket outlet point on independent board controlled by one, one way modular switch 06 Amps.

All as per Srl item No 29 here-in-befor but One 06 Amps socket outlet point on same board controlled by one, one way modular switch 6 Amps.

All as per Srl item No 29 here-in-befor but with 2.5 Sqmm nominal cross sectional area copper conductor cable with earth wire 2.5 sqmm for one 16 Amps modular socket outlet point on independent board.

S&F Modular Switch, 1 Module, 6A, AC, 240V, one way ISI Marked complete all as specified and as directed.

S&F Modular Switch, 1 Module, 16A, AC, 240V, one way ISI Marked complete all as specified and as directed.

S&F Modular Bell Push, 1 Module, 6A, AC, 240V, one way ISI Marked complete all as specified and as directed.

S&F Modular Step Fan Regulator, 2 Module, 120W, AC, 240V, one way ISI Marked complete all as specified and as directed.

S&F Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way ISI Marked complete all as specified and as directed.

S&F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way ISI Marked complete all as specified and as directed.

Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fix in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed of maby Engr-in-Charge .

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed

Supply and fix of switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

S&F stepped type type electronic fan regulator flush type complete all as specified and as directed.

S&F in repairs lamp holder, PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, ISI marked complete all as specified and as directed.

Supply and fixing LED lamp 2 pin 9/10 watt complete all as specified and as directed.

S&F in repairs Ceiling rose surface Bakelite 65x50mm, 3 terminals, AC, 240V, ISI Marked complete all as specified and as directed.

S&F in repairs Call Bell, AC, 240V, SP, ISI Marked complete all as specified and as directed.

S&F in repairs LED Recess mounted, ceiling pannel, 2'x2' , 36 watts, 240V light fitting with heat exchanger unit complete all as specified and directed.

S&F Wall mounting fancy light fitting with polycarbonate diffuser prewired incl 6 to 9 Watts LED lamp Model No - 30978 Make - philips complete all as specified and directed. directed.

S&F spot cum down lighter fitting3 to 5 watts Model No - 30973 Make - philips complete all as specified and directed. directed.

Supply and fixing LED light fitting 1x22/25 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed.

S&F in repairs 40watt building Security light Watt pewired LED street light luminaire incl suiable size OD GI pipe light grade bracket, bend to shape, two nos mounting clamps with nuts, bolts and washers complete all as specified and as directed.

S&F Post Top,energy saving luminaire with 30 Watts high power LEDs, IP 65 complete all as specified and as directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and as directed. by Engineer - in -charge.

All as per item No. 60 above but IP-43 Protection VTPN DB, incomer MCCB type, 415V, 4way with 250 Amps rated busbar, double door type complete all as specified and as directed.

Supply and fixing MCB, SP, AC, 240 volts 'C' curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&F in repair Isolator DP, 40A, AC, 240V, ISI Marked all as specified. complete all as specified and as directed.

S&F and grouting in wall sheet metel enclosure factory fabricated with single pole and neutral with a two pin and earth plug top and socket complete with and single pole MCB 20 Amps 240 volts complete all as specified and as directed.

S&F 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 36KA with Thermal - Magnetic Release ISI Marked. complete all as specified and as directed.

S&F in repairs, 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25KA with Thermal - Magnetic Release ISI Marked. complete all as specified and as directed.

Supply, Laying and testing cable XLPE insulated screened, PVC bedded, Galvanised steel srip or wire armoured electric power cable (Heavy duty) 1100 V Grade, aluminium conductor of size 50 sqmm 3.5 core complete all as specified and as directed. Note : Earth work excavation, RFR, removal, sand cushioning, cable protection will be measured & paid seperately.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M & L for fly ash brick protection length of brick shall be laid across the length of cable) complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/ losse soil complete all as specified and as directed.

M&L for GI light grade tubing 40mm dia laid in trenches, road crossing , passing through pipe or laid in wall/pole complete all as specified and directed

Material and labour for single phase sub main wiring with 06 Sqmm nominal cross sectional area, two run of single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including one run of continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down old unserviceable submain complete all as specified & directed. Note:-One meter of conduit along with 3x6 sq mm wire shall be measured as one unit length.

All as per Srl item No 74 here-in-before but three phase sub main wiring with 4 run 10 Sqmm + 2 run 6Sqmm earth in 32mm dia conduit (4x10 + 2x6 Sqmm - one unit length)

M/L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, for pit cover including testing on completion complete all as specified & directed

Arun Construction Co.

vibha associates