PROVISION OF BERTHING FACILITIES AT HALDIA

Amount

Schedule "A" Part – I to Schedule "A" Part – VI: NOTE: Schedule "A" Part – I to Part – VI are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lump Sum price worked out by the contractor for "BUILDINGS & STRUCTURES", for the lumpsum price of Rs. 27,70,000.00 inserted by MES as listed in Schedule 'A' Part - I on Serial Page No. 21(R)

Price worked out by the contractor for "SITE CLEARANCE/ EARTHWORK AND AREA DEVELOPMENT", against the price of Rs. 23,658.70 inserted by MES as listed in Schedule 'A' Part - II on Serial Page No. 22(R)

Price worked out by the contractor for "INTERNAL WATER SUPPLY ", against the price of Rs. 0 inserted by MES as listed in Schedule 'A' Part - III on Serial Page No.

Price worked out by the contractor for "INTERNAL ELECTRIC SUPPLY ", against the price of Rs. 11,321.60 inserted by MES as listed in Schedule 'A' Part - IV on Serial Page No. 26(R)

Price worked out by the contractor for "EXTERNAL WATER SUPPLY", against the price of Rs. 3,10,365.70 inserted by MES as listed in Schedule 'A' Part - V on Serial Page No. 28(R)

Price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY " against the price of Rs. 48,017.60 inserted by MES as listed in Schedule 'A' Part - VI on Serial Page No.

Schedule "A" Part - VII: [Miscellaneous Items]

INTERNAL ELECTRIFICATION

Item No 1 : M & L for point wiring complete with PVC insulated and unsheathed cable 1.5 sq mm (nominal area) multi stranded copper conductor single core FRLS , Conforming to IS : 694 including medium grade concealed unplasticised PVC conduit conforming to IS : 9537 ( Part-3) and ISI marked not less than 20 mm dia with concealed in wall anodised pressed steel terminal boxes as per manufacturer's design of reqd. size (factory made) with grid plate, crown or cover plate made of polycarbonate of required colour complete with all accessories and all as specified including PVC insulated and unsheathed cable1.5 sqmm (nominal area) stranded copper conductor single core Conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete for following :-

(a) One light /fan/exhaust fan point controlled by one switch

(b) One 3 pin socket outlet on same board

Item No 2 : M&L for point wiring complete for one socket outlet 15 amps on an independent board with PVC insulated and unsheathed cable 4 sq mm (nominal area) stranded copper conductor single core conforming to IS : 694 including medium grade concealed unplasticised PVC conduit conforming to IS : 9537 ( Part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel anodised terminal boxes not less than 2 mm thick of reqd. size (factory made) with grid plate, crown or cover plate made of polycarbonate of required colour, complete with all accessories and all as specified including PVC insulated and unsheathed cable 2.5 sqmm (nominal area) stranded copper conductor single core conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete and controlled by one 15 Amp switch.

Item No 3 : M & L for Sub main wiring with 2 runs of 6 Sqmm PVC insulated HRFRLS Copper conductor cable including PVC concealed conduit of 20mm dia with accessories and along with one run of 4.0 Sq.mm HRFRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit.

Item No 4 : Supply and Fixing the modular type stepped fan regulator 120 W, 2 Module and connecting all as specified and as directed.

Item No 5 : S& F Ceiling fan 1200 mm sweep, single phase 230V, 50 Hz, BEE 5 star rated including down rod complete all as specified and as directed.

Item No 6 : Supply and fixing Exhaust fan of 300 mm sweep single phase 230 V AC, 1450 RPM, heavy duty with louvered shutters made of metal and connecting the fan to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified and as directed.

Item No 7 : S& F LED 1X20 Watts ceiling/wall mounted lighting fixture with lamp, lumen not less than 2100 lumen, polycarbonate body, environmental friendly, energy efficient fixed to wall connecting to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection with earthing complete all as specified and as directed. Make: Crompton Cat Part no LDL-20-CDL or equivalent as approved by GE from the list of makes included in the tender.

Item No 8 : S& F LED 1X8 Watts ceiling/wall mounted lighting fixture with lamp, lumen not less than 770 lumen polycarbonate body, environmental friendly, energy efficient fixed to wall connecting to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection with earthing complete all as specified and as directed. Make: Crompton Cat Part no LTT8-8 or equivalent as approved by GE from the list of makes included in the tender.

Item No 9 : S& F LED 1X18 Watts decorative ultra slim square profile liner LED lighting fixture with lamp, fixed to ceiling/wall , polycarbonate body, environmental friendly, energy efficient fixed to wall connecting to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection with earthing complete all as specified and as directed. Make: Crompton Cat Part no LCDSPLN-S-18-CDL or equivalent as approved by GE from the list of makes included in the tender.

Item No 10 : S&F 1X45 Watt LED Building Security Light with electronic drive suitable for 40 mm dia medium grade GI tubing 1.5 m long bent to shape fixed to wall and connecting to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection with earthing complete all as specified and as directed. Make: Crompton Cat Part no LSTS-45-CDL or equivalent as approved by GE from the list of makes included in the tender.

Item No 11 : S&F 9 Watt LED bulb pin type system, lumen not less than 770 lumen, complete all as specified and as directed.

Item No 12 : S&F Modular switch socket combination 2 in 1 , single pole, one way 6 Amp, 240 V flush type complete all as specified and as directed.

Item No 13 : S & F MCB SP 6 to 16 Amps 240 Volts 'C curve', complete all as specified and as directed.

Item No 14 : S & F MCB DP 40 Amps 240 Volts 'C curve', complete all as specified and as directed.

Item No 15 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

EXTERNAL WATER SUPPLY

Item No 16 : S&F , installed & testing of monobloc pumping set, centrifugal discharge of 3.3 litres/sec, electric driven , 3 phase 50Hz, 440V of capacity of 5HP and 45 m head, inclusive of starter and PCC foundation, connection cable, nuts and bolts complete all as specified and directed. Model No KDS-550 of Kirloskar Brothers or equivalent as approved by GE from the list of makes included in the tender.

Item No 17 : S&F , GRP Panel tank of 25000 litre capacity as per the description given below , inclusive of connection with nuts and bolts complete all as specified and directed :- (i) Tensile strength (Mpa)≥60 (ii) Bending strength (Mpa)≥100 (iii) Glass fiber content,%≥25 (iv) Standard panel is typically 1000 x 1000mm, 1000 x 500mm, 1000 x 1500mm. The contractor has to assemble the tank for the required capacity as mentioned above so that the tank can be placed and accomodated on the RCC staging mentioned in Sch 'A' Pt-I. (iv) The bolts, nuts and other fasteners that hold the GRP tank together shall be hot-dip galvanized. (v) The internal and roof bolts shall be of grade 304 stainless steel (vi) The sealant for sealing the joint shall be high density, non-toxic PVC foam (vii) Tank Support/ Skid Base i.e. The beams and framework shall be hot dip-galvanized (viii) Ladder :- The external ladder shal be hot-dip galvanized steel pipe while the internal ladder shall be made of standard 304 stainless steel pipe or hot-dip galvanized steel pipe. (ix) There should not be any metal components in the internal structure MAKE : APEX SANTECH SYSTEM/JESS INDUSTRIES/ESTRAC COMPOSITES (INDIA) PVT LTD/SINTEX INDUSTRIES LTD

Item No 18 : Cast iron sluice valve both end flanged class PN 1.6 conforming to IS-780 with iron wheel head and brass spindle of size 80 mm bore including necessary nuts bolt, washer, rubber/fibre board gasket complete all as specified and directed .

Item No 19 : Supply and fix Foot Valve conforming to IS 4038, 80 mm bore including necessary nuts bolt, washer, rubber/fibre board gasket complete all as specified and directed.

Item No 20 : Supply, fabricate, install, testing and commissioning of LT Panel board confirming to CPRI approved manufacturer made out of CRCA sheet 2.00 mm thick double door, Indoor cubicle type totally enclosed with front and rear opening, 40x40x5mm thick angle iron frame work, hinged doors with projected on raised PCC platform with PCC 1:2:4 type B1 (20mm graded aggregate) of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, nuts/ bolts used to be made of rust proof material as per IS: 8623, with 4 Nos bus bars of size 40x6mm (Copper bus bar) of 200 Amps rating , over 8 Nos insulators suitable for three phase LT AC, 50 Hz 415 V 4 wire, complete with powder coating, necessary internal electric wiring / connection with FRLS cables not less than 2.5sqmm , necessary sleeves IP45 class protection, as required and provision of the following : a) FOR INCOMING i) MCCB 100 Amp, 4 Pole, 16 KA, 415 Volts - 01 Nos ii) Digital ammeter 0-200 Amp 96 sqmm with CT -01 Nos iii) Digital Voltmeter 0-500 Volts -01 Nos iv) LED Indicating Lamps for each phase with colour code Red Yellow Blue for R, Y and B Phases - set of three b) FOR OUT GOING i) MCCB Cap 32 Amps, FP 415 Volts breaking capacity 25 KA - 03 Nos ii) Automatic Star Delta Starter 5 HP with relay delay - 02 Nos

Item No 21 : Construction of brick masonry valve chamber 600mm x 600mm x 600mm (inner dimensions) for valve including excavation and earth work in any type of soil and 100 mm thick PCC 1:4:8 type D2 foundation(using 40 mm graded crushed stone aggregate, 250 mm thick brick work in CM (1:6) plastring internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type C1 coping 50 x50x6 mm angle iron & 6 mm thick MS plate cover complete with locking arrangement and painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer all as specified all as directed.

Item No 22 : Cutting existing cast iron pipes/ GI pipes of any size and reducing to required length before laying and insertion of 'T's and branches for 80/50 mm, including screwing of existing pipe line for addition and alteration all as specified and as directed.

Item No 23 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 25 sqmm cross-sectional area, provided wth cable glands where equired, sticker inicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (From sub-station building to pump house LT panel)

EXTERNAL ELECTRIFICATION

Item No 24 : Supplying and laying reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150mm x 40mm in trenches for cable protection, complete all as specified and as directed.

Item No 25 : Supplying and laying reinforced precast concrete cable cover, class HV, Type I, flat, size 300 mm x 180mm x 40mm in trenches for cable protection, complete all as specified and as directed.

Item No 26 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed. [ Total 16 consists of 14 Nos for external electrification and 02 Nos for external water supply]

Item No 27 : Supply and lay HT UG cable heavy duty XLPE insulated screened PVC bedded galvanised steel strip or wire armored electric power cable for earthed system with aluminium conductor ,11000 volts grade cross sectional are 95 sqmm 3 core conforming to IS 7098 Part II -85 with latest amendements including testing,commissioning in trenches /duct/fixed to wall/pole complete all as specified and directed.

Item No 28 : S&F cable jointing kit for 11 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE cable 95 Sqmm complete all as specified and as directed.

Item No 29 :- Supply & installation, commissioning and testing, indoor type 500 KVA capacity of transformer step down 11/0.433 KV, copper wound, core type winding, AC supply 3 phase, 4 wire 50 HZ, oil immersed ,naturally cooled, delta connected on primary (HT side) and star connected on secondary (LV side) having tapping 0%, 2.5% ,5%, 7.5% on HV, to be charged by means of hand operated off load tap changing gear including first filling of oil and all standard fittings such as breather unit, drain out valve, conservator tank and mounting, complete all as specified in IS-1180 marked and shall comprise of the following :- Make:- Alstom / Schneider/ BHEL.

(a) HT side(primary) consisting of 03 Nos indoor porcelain bushing with brass rods complete with nuts,bolts and washers complete.

(b) LT side(secondary) consisting of 04 Nos indoor porcelain bushing with brass rods, complete with nuts bolts and washers complete.

(c) Oil conservator tank with filter type drain valve and oil level gauge.

(d) De-hydrating breather with first fill of dehydrating agent(Silica gel)

(e) Explosive vent for release of pressure will be provided on the cover.

(f) Thermometer pocket on tank cover.

(g) Silica gel breather along with conservator tank will be provided.

(h) One No 100 mm dia, dial type thermometer, vapour pressure type, having range (0-120) degree celsuis with metal guard having maximum permissible reading temperature indicator with re-setting device.

(j) Two earthing terminal on tank cover to facilitate fixing of 50x6mm galvanised iron earth strip for earthing of neutral & body.

(k) Rating plate and termninal marking plate-02 Nos

(l) Oil level guage

(m) Oil drain filter valve

(n) 4 Nos Lifting lugs will be provided.

(o) Oil filling hole with cap / plug with connecting plate complete.

(p) Air release valve plug

(q) Four plain solid cast steel heavy duty detachable rollers.

(r) Extra bushing for neutral in the LT cable box for providing independent set of earthing for neutral complete.

(s) First filling of new and unused transformer oil IS 335 marked filtered and tested for Di-electric strength not less than 42 KV at 2.0 mm gap between testing electrods. NOTE:- Certification of Di-electric strength shall be submitted by the contractor after filling/testing the Oil.

FOR OUTGOING :- (a) MCCB , AC, 415Volt , 3 phase, 04 pole 320 amp capacity, 35 kA with adjustable thermal and adjustable magnetic setting and over load protection - 02 No (b ) MCCB, 4 pole, 63 amps, 16KA, 415 Volts - 02 Nos (c) MCCB, 4 pole, 32 amps , 16KA, 415 Volts - 03 Nos

FOR OUTGOING :- (a) MCCB , AC, 415Volt , 3 phase, 04 pole 160 amp capacity, 36 kA with adjustable thermal and adjustable magnetic setting and over load protection - 03 No including metal plug and socket of 63 Amps(3P+N+E) for connection for outgoing feeding to connect cable for ship 3P + N+E

Item No 33 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 400 sqmm cross-sectional area, provided with cable glands where required, sticker indicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For Main Panel & APFC panelx2Run)

Item No 34 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 300 sqmm cross-sectional area, provided with cable glands where required, sticker indicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For Main Panel to AMF panelx2Run)

Item No 35 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 240 sqmm cross-sectional area, provided with cable glands where required, sticker indicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For Panel 2 to Panel 3 & 4)

Item No 36 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 25 sqmm cross-sectional area, provided with cable glands where required, sticker indicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For Panel 2 to Pump House and Fire Pump)

Item No 37 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 4 core, 16 sqmm cross-sectional area, provided with cable glands where required, sticker indicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For Panel 2 to High Mast)

Item No 38 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 4 core, 10 sqmm cross-sectional area, provided with cable glands where required, sticker indicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For Street light)

Item No 39 : M&L for road cutting and making good the surface to match the existing specifications, for laying of LT UG cable /Galvanised Iron Pipe complete all as specified and as directed. (For Street light)

Item No 40 : S&F street light fitting new generation energy saving and enviromental friendly, long life LED, street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07.incl 1.5m length GI tubing light grade, 40mm dia, bended to required shape with required nuts and bolts and clamp and connection complete with PVC wire 2.5 sqmm 3 Core for electric connection from light fittings to terminal box all as specified and directed. make Havells Cat No-ENDURAPEARLNEOSL40W LED757PASYTOPC equivalent philips,crompton

ITEM NO. 41 : Supply installation testing & commissioning of 16 m high mast , polygonal, tapered and flanged mounted type, totally hot dipped galvanized with galvanization thickness(coating) not less than 85mm and suitable for wind velocity as per IS 875 part III. The mast shaft will be in two sections with no circumferential weld and shall be stress fitted at site along with supply of accesories for 15 m. High mast which includes head frame, lightning arrestors, steel wire rope, compensating disc, winch power trailing cable, integral power tool control panel housing comprising of suitable timer & contactor circuit for automatic on/off of high mast lights, LED Aviation obstruction light, galvanized lantern carriage suitable for mounting with and including the following luminairies and accessories to be installed at mast:-. (a) Heavy duty LED flood light of 70 watt (Havells cat part No. JETANEOFL70WLED757LTG HSN CODE 9405. or equivalent in philips,crompton - 08 Nos. (b) Supply of control panel housing suitable control circuit for automatic switching on and off of the mast. It shall also have suitable controls for operation of power tool- Set -01 (c) Erecting of high mast with the help of suitable equipment and wiring of luminaries with all wiring material-Job 01 (d) Provision of GI Pipe earthing for high mast with 2.5m long 40mm dia GI Pipe including connection of high mast earth terminal with 25x3mm GI flats -01Job (e) Installation of control panel on suitable foundation(to be constructed as per OEM specifications) incl all material, labour -01Job MAKA : BAJAJ/PHILIPS/HAVELLS/CROMPTON GREAVES

Item No 42 : Supply and erecting of 7m long Octagonal Street light pole complete with casting base plate, taper plug, bolts, nuts, & screws or specified type complete make :- Utkarsh,Kolkata pole

Item No 43 : Supply, install, testing & commissioning of indoor type 11 KV 3 phase, 50 HZ, 26.3 KA, HT totally enclosed free standing, sheet steel clad, cubical pattern, HT panel switch board with locking arrangement for panel doors, complete with short time with stand current sec with 3 Nos 630A PVC sleeved copper bus bars and comprising of the followings :-Incoming VCB 400A -01 Nos & Outgoing VCB 400 A -01 Nos comprising of the followiing:-

INCOMING VCBs :-

(A) Incoming TP vaccum circuir breaker 11 KV 400 A, horizontal draw out type, horizontal isolation, rated current 400 A -01 Nos each fitted with :-

(a) Manually changing & closing mechanism, 1- Motorised spring charged closing mechanism.

(i) Mechanical close/strip knob - 01 set

(ii) Mechanical ON/OFF indicator - 01 No

(iii) Mechanical spring charged / free indicator -01 No

(iv) 1- Set of 6 Nos + 6 NC Aux contact block -01 No

(v) DC 30 volt, shut strip -01 No

(b) 1- Set space heaters 1x60 watt -03 nos, 230V AC with switch humidity sensor and thermostat.

( c) VCB ON & OFF switch, trip circuit heating, auto trip, service position, test position.

(d) 1-Set of Red/green indicating lamps for circuit breaker on/off auto trip indication.

(e) 3 resin cast type twin secondary current transformer of ratio 300-100/5-5A, class of accuracy 0.5/5P10, burden 10VA/10 VA burden for protection & metering.

(f) 1-3 phasing cast draw out type potential transformer ratio 11 KV root 3/ 110 V class 0.5 accuracy, 50 VA/ph burden, complete HT & LT fuses and connected to incoming side ( one per incoming VCB)

(g) Luminous push button for trip circuit check.

(h) Microprocessor based relay with local display & communication port.

(j) Multifunction electronic digital meter consisting of measurement of current, voltage frequuency, KW, KWH, KWARH etc type PM 500.

(k) 1 No- Cut out plate for cable entry for 95 sq mm 3 core cable.

(l) PVC FRLS copper cable single core multistranded of size 2.5 sq mm for all control wiring.

(m) MCB DP 32A -01 No for control supply.

OUTGOING VCBs :-

(B) Outgoing TP Vacuum circuit breaker 11KV, horizontal draw out type, horizontal isolator rated current 400A-01 Nos each fitted with :-

(a) Manually changing & closing mechanism, 1- Motorised spring charged closing mechanism.

(i) Mechanical close/trip knob - 01 set

(ii) Mechanical ON/OFF indicator - 01 No

(iii) Mechanical spring charged / free indicator -01 No

(iv) 1- Set of 6 Nos + 6 NC Aux contact block -01 No

(v) DC 30 Volt, shut strip -01 No

(b) 1- Set space heaters 1x60 watt -03 nos, 230V AC with switch humidity sensor and thermostat.

( c) VCB ON & OFF switch, trip circuit heating, auto trip, service position, test position.

(d) 1-Set of Red/green indicating lamps for circuit breaker on/off auto trip.

(e) 3 resin cast type twin secondary current transformer of ratio 300-100/5-5A, class of accuracy 0.5/5P10, burden 10VA/10 VA burden for protection & metering.

(f) Luminous plus button for trip circuit check.

(g) Microprocessor based relay & communication port

(h) Multifunction electronic digital meter consisting of measurement of current, voltage frequency ,KW, KVAR, maximum demand for KW/KVAR, PF, KWH, KWARH ETC type PM 500.

(j) 1 No- Cut out plate for cable entry for 95 sq mm 3 core cable.

(k) PVC FRLS copper cable single core multistranded of size 2.5 sq mm for all control wiring.

(l) MCB DP 32A -01 No for control supply.

(i) Each VCB triping coil voltage should be 30 VDC.

(ii) Two incoming panels panels & bus coupler shall be electrically & mechanically interlocked.

(iii) Contractor shall provide drawings of 11 KV VCB panel for approval before procurement. The set of HT panels shall be factory inspected and routine test shall be carried out in the presence of rep of Accepting Officer.

(A) BATTERY CHARGER :- Automatic float & manual boost charger housed in one common panel/ enclosure power coated. The panel shall be rigid self supporting structure reassembled totally enclosed cubical constructed out of sheet metal of 2 mm thick. The panel shall have hinged doors with adequate cross ventilation on both side as well as on the top, to avoid the rise of temperature. The panel shall be duly painted with chemical finish of synthetic enamel paint light grey internally as well externally. The charger equipment shall employee static semi conductor full wave silicon rectifire suitable for operation in conjunction with air cooled transformer single phase 230 Volts 50 cycles supply. The charger shall be capable of Automatic and manual operation automatic along with associated components for interlocking between the trickle charger shall be as under :- Make - ABB/Electricfield/Siemens/Bandford.

1. Type of rectifier : Air cooled type.

2. AC input : 230 Volts 50 cycles.

3. Type of charger : Servo control

4. Voltage variation : 230 V+ 10%

5. Frequency : 50 Hz

6. Frequency variation : + 2%

7. BOOST CHARGER

(i) Power output : 1 KW

(ii) Voltage : 36-43 Volts

(iii) Current : 10 Amps

8. FLOAT CHARGER

(i) Power output : 0.43 KW

(ii) Voltage : 36-43 Volts

(iii) Current : 10 Amps

(iv) Range of voltage control : 0- 43 Volt

9. DC output voltage : step - less regulation no load to full load.

10. Maximum temperature : 35 deg C and ambient temp of 50 deg C.

11. Dropping characteristics beyond the rating capacity of the charger.

(i) Float charger output voltage adjustable continuousaly 0-40 volt DC when operated manually.

(ii) Boost charger voltage adjustable continuously 0-5 volt/DC

12. Sealed maintenance free : 15 Nos batteries of 02 volts and 100 AH each.

(B) DC BOARD :- 30 volt DC distribution in sheet steel cabinet made out of CRCA sheet of 2 mm thick, powder coated floor mounted hinged door on the back for easy access to the components installed inside. The board will be completed with wiring of copper conductor bus bar links crimping terminals.

(a) INCOMING PANELS

(i) MCB suitable for 30 volt DC 63 Amps double pole with over load and short circuit realease as incoming circuit - 01 No.

(ii) Moving coil volt meter 96x96 mm 0-50V with fuse protection - 01 No

(iii) Moving coil Ammeter 96x96 mm 0-30A with LED indicating lamp - 01 No

(iv) Indicating LED lamp on the incoming side -01 No

(b) OUTGOING PANELS

(i) Double pole MCB to work on DC supply 30 volt of 10A rating and provided with indicating lamps - 01 No

(ii) High conductive electrolytic grade Aluminium bus bar of 100 Amps, TPN with heat shrinkable sleeve duly colour coated.

Item No 44 : Supplying, installing, commissioning & testing of Silent engine generating set with accoustic enclosure as per CPCB norms 415 volts 400 kVA 3 phase 0.8 power factor 50 Hz, 1500 RPM self excited self regulated brushless AC generator including accoustic enclosure suitable for ambient condition and conforming to condition under IS 4722, BS 5514/ 2613 /5000 with suitable AMF Panel as per manufacturer's recommendations complete all as specified and directed with the following :- (A) Alternator :- Standard design alternator rated at 400 kVA net output at site after considering de-rating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self excited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class 'H' and voltage regulation of +/- 1% at rated voltage from no load to full load. The alternator shall be conforming to BS 2613/5000 and shall be imposition to generate supply with frequency regulation with in +/- 1% tolerance. The alternator will be suitable for tropical climate and shall generally conform to BS - 2613/5000/ IS – 4722.The Alternator shall be:- i) Insulation class - 'H‘ ii) Temperature rise Class - 'H‘ iii) Excitation : Self Excited iv) Regulation performance: The voltage is kept constant with +/- 1%, manual voltage adjustment within +/- 5% v) Frequency regulation +/- 1%

(B) Diesel Engine: - Adequate capacity of Diesel engine as approved by the accepting officer basing on manufacturers technical details water cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for half an hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under :- i)Fly wheel with housing ii) Cooling system :- Moulded radiator with fan & belts iii) Cooling Water pump : - Centrifugal type belt driven iv) Exhaust System :- Exhaust System complete with exhaust piping of 150mm dia with MS pipe light grade upto & outside and 1meter away from the enclosure, covered with asbestos rope and aluminium foil of 28 SWG complete with in the enclosure for safe exhaust without transforming vibration to the wall of the enclosure. Exhaust gas turbo charger type. Exhaust manifold Silencer : Residual type Bellows iv) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governor for 1% speed /frequency regulation, Fuel filters, Fuel hoses. v) Lub oil System :(a)Lubricating oil filter (b) Lubricating oil pump vi) Air Intake System : (a) Air intake Manifold - Air cleaner dry type vii) Governor :- Electronic Governor viii) Starting System :- Electric Self starter with maintenance free battery including battery charging alternator

ix) Batteries :- Batteries of maintenance free of capacity as recommended by the manufacturer complete with copper conductor multi stranded leads of suitable length from self starter to the battery terminals complete with initial charge and initial fill of electrolyte all as specified and Starter gear ring Start and stop push button, Ignition key / Switch Handling and operation : Salient features of accessories shall be as under: Radiator with blower fan Corrosion inhibitor coolant, Paper element filters for fuel, lub oil and by pass, Electronic governor controlled direct fuel injection system Fly wheel housing and fly wheel x) Generator Monitoring Panel : - Comprising of all standard items as mentioned under this schedule or asper standard practice iginiton key switch and start / stop arrangement, indications for Engine parametes, hour run meter, RPM meter, Engine oil pressure indicator, water/coolent temparature indicator, Battary volt display. xi) Safety Controls : - Engine low lube oil pressure high water temparature and over speeding of engine xii) Coupling arrangement : - Flexible coupling, fly wheel to suit flexible coupling xiii) Accessories :- AVM Pads built in enclosure and for entire unit on platform. xiv) Base Frame : - Should be provided as OEM norms xv) Fuel Tank :- Additional Fuel Tank of capcaity to suit Daily service fuel tank made out of 3mm thick (10G) HR sheet top and bottom with caliberated level indicating arrangement, stop cock, drain plug, fuel pump of suitable capacity complete on a common base out side the accoustic enclosure. xvi) MS pipe line to and from the fuel tank to the DG Set

(C) CONTROL PANEL :- The standard microprocessor based control panel shall be fabricated out of 3.15mm thick CRCA sheet and powder coated in side and out side and shall display as follows:- (i) Voltage of all Three phases, (ii) Current of all Three phases, (iii) Frequency, (iv) Bus bar Chamber with aluminium busbar of cap 100 Amps - 04 Nos, (v) C.T. 100/5 Amps - 03 Nos. (vi) MCCB TPN, of appropriate capacity - 01 No .

D) Accoustic Enclosure:- Manufactured by OEM suitable for 400 KVA DG Set (i) NAL approved as per CPCB (ii) It Should be as per latest rules and regulations of Ministry of Environment and Forest and Pollution control board (iii) The generating set battaries and control panel should be inside the enclosure. (iv) Fuel tank should be out side the enclosure in the sub station building. (v) Construction Details/specification are as follows: a) Outer body :- CRCA Sheet of 1.6mm thick b) Doors :- CRCA sheet of 1.6 mm thick c) Sound Insulation :- As per OEM Norms vi) The accoustic should be composite in construction and fully assembled integral unit vii) The batteries should be placed inside the enclosure beside the DG Set on a suitable insulated platform viii) The fuel tank is to be located in Sub Station Building and cost of the fuel lines is deemed to be included in the offer. ix) The DG Set should be provided with external Emergency stop push button x) The enclosure should be suitably illuminated by LED Lamp fittings. xi) The noise level should be 75 dba at 1m under free field conditions. xii) The acoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Gen set Green. The base frame should be painted with epoxy based black shade

(E) ENGINE INSTRUMENTS PANEL :- All relevant Para meter shall be conventionally displayed on complete panel there by providing easy monitoring of lubricant oil pressure, coolant temperature battery charging ammeter, RPM and hour meter, starting switch etc.

Item No 45 : Automatic power factor control panels fabiricated out of 2.00mm thick CRCA steel sheet and other suitable size steel sections (angle iron 'T' section, channels etc) in cubicle compartments, free standing, floor mounted, dust and vermin proof complete all as specified and directed. Cable glands shall be provided on top as well as at the bottom of the panels. Panels shall be treated with anticorrosive process before powder coating of approved shade as per specifications. Panels shall be double door hinged type & in-built locking arrangment earthig terminals shall be provided for all distribution panels. Panels shall be suitable for 440V, 3 phase, 4 wire and 50Hz supply system. Lifting hooks shall be provided. Approval from the Accepting Officer for the design & specificationis of the Panel & its components shall be taken by the contractor before procurement. The automatic and manual control panel shall be of capacity as mentioned under and shall be provided duly housed/mounted with the following components/accessories/fittings complete in all respects as directed:- (a) 125KVAR capacitor automatic control panel with the follwing steppings:- (i) Considering 15% space for future expasion. (ii) Steps shall be 50+25+25+25 (b) BR-6000 Relay of 08 steps shall be used so that in future 2 steps can be used:01 Job. (c) MCCB, FP, 200Amp, 35KA with microprocessor based release relay: 01 No