SPECIAL REPAIR TO BLDG NO P-83H AT NTS (SVP), TEYLERABAD UNDER GE MINNIE BAY, SRI VIJAYA PURAM

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.11 sqm but n.exc 0.18 sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed

M & L for durastone heavy duty vitrified parking tiles of size 600x600x15 mm thick as in floor set jointed and pointed in neat cement slurry over and incl 20 mm thick screed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M & L for durastone heavy duty vitrified parking tiles of size 600x600x15 mm thick as in skirting set jointed and pointed in neat cement slurry over and incl 10 mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed..

M & L for rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound on concrete or brick masonry surfaces and finishing the top surface even and fair complete all as specified and as directed.

Supply only liquid water proofing compound

M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed.

M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for applying polymer modified cement mortar rendering 15 mm average thick in layers CM 1:3 on concrete surface duly mixing polymer modifier 'Nitobond AR' of make: M/s Fosroc Chemicals India (P) Ltd. @ 10 Ltr per bag of cement or equivalent in M/s Harjas Coatings & Polymers @ 5% by wt of cement / M/s Pidilite Industries complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions.

M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer and including applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smoothall as specified & directed

M & L for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion of apex ultima paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. Make : Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion)

M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer all as specified.

M & L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. Make : Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion)

M&L for complete removal of old surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer including applying plaster of paris putty of 1mm thicness complete all as specified and as directed.

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed.

Demolition of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for complete all as directed.

Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75mm thick as in path /hard standing/plinth protection with finished surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with grade Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as directed.

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as directed.

Providing and fixing Factory made single rebate WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete in colour as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account.

Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 including screws complete all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodised 150mm long complete all as directed.

S&F repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed.

S & F in repairs Floor Door Stopper of size 70-100 mm of aluminium alloy body and tongue, anodised, with rubber cap complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sq.m and not exceeding 4 sqm each with shutters without taking off shutters from the frames and removing off site etc complete all as specified and as directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Supply only sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n.exc 0.5 sq.m in each pane complete all as specified and as directed

Supply only 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and as directed

Supply only particle board, 12 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed.

M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

M & L for providing cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in roof kerb,apex stones,bed plates etc complete all as specified and as directed

Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 20mm including taking down complete all as specified.

- Ditto - all as per item No 46 here-in-before but 25 mm outer dia

Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as directed.

Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as directed.

Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as directed.

Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as directed.

Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as directed.

Supply and fixing 25 mm outer dia tank Adaptor complete all as directed.

Supply and fixing 20mm outer dia union complete all as directed.

Supply and fixing 25 mm outer dia union complete all as directed.

Supply and fixing 20 mm outer dia Brass Tee complete all as directed.

Supply and fixing 25 mm outer dia Brass Tee complete all as directed.

S & F in repair 50 mm PVC pipe laid in floor or wall with fitting complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fixing in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed.

S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets all as specified and directed.

S&F in repairs, 15mm CP 2 Way Bib Cock heavy duty all as specified and directed

S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed.

S & F 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as directed.

S&F in repairs PVC flexible waste pipe of 32 /40 mm for wash hand basin and Kitchen sink complete all as directed.

S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs stop valves/angle valve cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed.

S&F brass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as directed.

S&F in repairs vitreous china wash basin, white flat back of size 550mm x400mm, excluding tap incl bracket complete all as specified and as directed.

S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (20mm graded aggregate) as in levelling course for slope correction of existing RCC roof surfaces including cleaning the roof surfaces and removing existing APP based membrane removing all foreign materials by wire brushes/ brooms/ water jet complete all as specified and directed by Engineer-in-Charge.

M & L for 15 mm thick screed bed in CM 1:3 in roof surfaces mixed with WPC as per manufacture's instruction complete all as specified and as directed.

S & F in repair Soap Dish with screws complete all as specified and as directed. Model No: Jaquar AKP-35731P

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as directed.

S&F 110 mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door complete all as directed.

S&F 75 mm bore PVC (SWR) bends of any radius complete all as directed.

S&F 75 mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door complete all as directed.

S&F 75mm PVC (SWR) vent cowl, complete all as specified and directed

S&F 100mm PVC (SWR) vent cowl, complete all as specified and directed

PVC (SWR) floor trap, 100-75mm dia plain with grating including jointing with solvent cement complete all as directed.

S&F in repair CP Waste coupling for Sink/WHB complete all as directed.

S & F in repair rotational moulded polyethylene water storage tanks 1000 Ltr (cylindrical vertical with closed top) UV protected anti bacteria coating with threaded cover hoisted and fixed in position including dismantling old tank complete all as specified in SSR Part I Make : Vectus-Smart, Prince -Store fit or equivalent

S&F in repair 25 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed

S & F in repair Gun-metal, globe or gate valves, 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S & F in repair Vitreous China urinals, bowl decorative type type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as directed.

M & L hardcore of gauge n exc. 63mm, with broken stone aggregate deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

100 mm thick plain Cement concrete (1:4:8) type C-2 (using 40mm graded stone aggregate) in sub base of floor complete all as directed.

Providing and laying vitrified parking tiles heavy duty of sizes (400X400) of 10-15 mm thickness conforming to IS 15622 in all colors and shades in outdoor floors and skirting meant for parking of cars and trucks, grouting the 3 mm width joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade including filling/grouting and finishing set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete.all as sppecified and directed.

M & L for providing cement concrete with type B1 (20 mm graded stone aggregate ) as in coping complete all as specifed and directed.

Taking down carefully existing aluminium/copper point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

One light /fan point controlled by one switch

One three pin switch socket 6 Amps plug point on same board

One five pin switch socket 6 Amps plug point on Independent board

All as per item No 98 herein before but with 2.5 Sqmm single core multi standard unsheathed copper conductor for one three pin socket 16 Amps on independant board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly complete all as directed.

All as per item No 98 herein before but with 4.0 Sqmm FRLSH single core multi standard unsheathed copper conductor for one three pin socket 16 Amps on independant board including continuous earth wire PVC insulated 4.0 Sqmm copper solid conductor to common earth dolly complete all as directed.

S&F Modular switch 1 way 6A, 220V 50HZ 1 module as per existing make and model complete all as specified and directed

S&F Modular Socket, 6A 2/3 Pin combined, 220V 50HZ, 2 Module as per existing make and model complete all as specified and directed

S&F Modular Socket 16A- 2/3 Pin combined, 220V 50Hz 2 Module as per existing make and model complete all as specified and directed

S&F Modular switch 1 way 16A, 220V 50Hz 1 modular as per existing make and model complete all as specified and directed

S&F ceiling rose, surface bakelite 65 mm x 30 mm, 3 terminals complete all as specified and directed

Taking down old u/s sub main wiring of any size and any discription all as directed by Engr-in Charge

M&L for Sub main wiring complete with 2 x 06 sqmm, single core, multi stranded copper conductor FRLS PVC insulated and sheathed cable 1100 volts grade, 6 Sqmm sixe with multistandard copper conductor, drawn in non metallic rigid P|VC conduit of size 25mm dia ISI Marked including PVC insulated unsheathed 6 Sqmm cable with multistandard copper conductor green PVC insulated as continious earth conductor cable connected dolly complete all as directed. Note (i) All three wire/cable (phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run/four runs of cable and one run/two runs of earth conductor and PVC Conduit/Casing Caping be measured as one length.

Taking down existing u/s fitting any type any size and Supply and fixing in replacemnt of LED lights fitting 1x20 w, 220V AC decorative box type with driver, holder including LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fix in replacement of MCB DB TPN, 415 volts, 200 A rated busbar 4 Way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 with MCB as incommer and MCB SP/TP in outgoing complete all as specified and directed by Engr-in-charge. Make Legrand, Schneider

S&F in replacement of sheet metal enclosure for MCB, DBm, SPN, 240V, 200 Amps rated busbar, 8way Double door enclosuer made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden retangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-Charge. Make - Legrand/L&T

Supply and fix in replacement of MCB 415 volts, 10 KA 'C' Curve complete all as specified and directed

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, complete with connection testing and commissioning all as directed by Engineer-in-Charge

Supply and fixing in replacement of DP RCBO 30 mA 40A SPN complete all as specified and directed by Engr-in-Charge

Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers etc connected to DBs all as shown in electrical plate No.5 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation / earth work in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab cover 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade,including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade up to 7.5 meter length etc complete all as specified.

S & F LED Light fitting 1x09/1x10 Watt bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed

Supply & Fix Exhaust fan, 300 mm Sweep complete with louvers including all civil work like cutting and making circular opening in existing wall etc, including connection up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make: Bajaj/Usha/Crompton Grieves

Supply and fixing wall mounting fan 450 mm sweep power 100 watts Operating Voltage 220-240 volts, single phase, jerk free oscillation and smooth running. Guard 120 Spokes Thermal overload Protect.or (TOP) helps in protecting the motor in case of any high voltage fluctuation, die cast aluminium hosing jerk free oscillation & smooth running comprising of high performance high speed motor for higher air delievery incl providion of three core flexible PVC Cable with standard copper conductor size 1.5 Sqmm connecting up to ceiling rose including all accessories complete all as directed. Make: Havells

Supply & Fix LED High Bay Light, 110W completed all as specified and directed.

Excavation in trenches, not exceeding 1.50m wide and not exeeding 1.50m in depth for foundations, trenches of cable or pipe lines etc or and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all specified and as directed.

Removing excavated materials (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal in store all as specified and directed following sizes:-

20 mm bore

25 mm bore

50 mm bore

100 mm bore

Taking up or down steel tubing and connection including cleaning for refixing or removal in store all as specified and directed following sizes:-

20 mm bore

25 mm bore

50 mm bore

100 mm bore

M&L for refixzing of exiisting old GI tubing medium grade with on e socket both end threaded in any length including cutting threading connection in new or old position and all type of GInew fittings for laid in trenches/wall/ceilling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of following sizes:-

25 mm bore

50 mm bore

Taking Out u/s Gun Metal, globe or gate valves , confied to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position for following size :- Make : LeaderZoloto

25 mm bore

50 mm bore

Supply, laying of Telerex DWC (double Wall corrugated) HDPE pipe confirming to IS 16205 (PART-24-2018) of outer dia 63 mm and inner dia 50 mm polyethylene including coupler, bends, cap etc with smooth internal and profited internal and profiled external surfacce for non pressure under gruond cable complete all as specified. Make : Gemini/rex polyextrusion ltd or equivalent

Taking down old u/s cable and Supply and laying in replacement of XLPE insulated PVC sheathed, armoured heavy duty electric under ground cable, with standard aluminium conductor, 1100 Volts grade of size 120x3.5Sqmm, laid in trenches/floor or fixed on wall/pole complete all as directed.

Supply and lfixing of GI pipe light grade with all fittings in trenches 50mm bore of GI pipe laid under road pavement of hard standing complete all as directed.

Please Enable Macros to View BoQ information