Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.8 LAccepted-AOC | 1 | Accepted-AOC AOC | |
| 2 | 2₹7.9 L+₹5,316 (0.68%)Rejected-Finance | 2 | Rejected-Finance L2 |
Tender Value
₹7.9 L
EMD Value
₹15,800
Closing Date
26 Nov 2020, 5:00 pmClosed
Executive Engineer
Water Supply and Sanitation Division Malerkotla
REPLACEMENT OF MACHINERY CONTROL PANEL REPAIR OF PUMP CHAMBER OHSR and WATER WORKS NEW DISINFECTION UNIT AUTOMATED WATER CONTROLLER NEW WATER CONNECTIONS PandL PIPE LINE and SIGN BOARD PAINTING ETC
2020_WB_56279_1
102/WSSD/MALERKOTLA/EE/2020-21
Open Tender
Civil Works
Item Rate
90 days
Malerkotla
Please refer Tender documents.
4 documents required · 4 mandatory
₹1
₹15,800
13 Jan 2021
18 Nov 2020
27 Nov 2020
18 Nov 2020
26 Nov 2020
18 Nov 2020
Amount
Component -1
Repair of Pump Chamber
White washing scraping inside of Pump Chamber.
Scraping of snowcem robbiacem etc.
White washing 2 coat inside of Pump Chamber.
Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on old work one coat to give even shade.
Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint.
Scraping of plastering of Pump Chamber.
Plastering 1:4, 12.5mm thick on Pump Chamber.
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.
Distempering with dry distemper of approved manufacture one coat on old distempered work.
Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting one coat with ready mixed paint for metallic surfaces in all shades on old steel or iron works.
Supplying & fixing glass panes including special metal sash putty of approved make.
Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.
panelled, glazed or glazed and panelled. 40 mm thick
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.
Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.
Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) (a) 30 mm thick
Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner straps, wooden knobs or handles fixed in position (Size 45 x 60mm).
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.
Repair including dismentaling and relaying of floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 for plinth protection.
Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent.
Providing and fixing of electric tube set of reputed make.
Repair of Gravel Pit outside the Pump Chamber. (0.90m Dia.) as per standard design & drawings of public health department.
RCC M-20 slab of opening of pump chamber.
Repair of OHSR
Repair of Expansion Joint Size 100 mm i/d complete in all respects.
Repair of Expansion Joint Size 80 mm i/d complete in all respects.
P/F OHSR Jali complete in all respects.
C.I. Cover of OHSR complete in all respects.
Repair of bottom dome including scraping & plastering complete in all respects.
Repair of Tank wall including scraping & plastering complete in all respects.
Painting of OHSR pipes including cost of labour & material complete in all respects.
Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.
Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast for plinth.
Conglomerate floor 40mm cement concrete topping 1:2:4 for plinth.
Repair of Water Works
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects.
Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).
Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7.
Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects.
Repair of main gate complete in all reppects.
Conglomerate floor 40mm cement concrete topping 1:2:4 for foot path.
Painting one coat with readymixed paint of metallic surfaces in all shades on old steel or iron works.
Finishing walls with exterior decorative cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade.
Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.
Repair and minor Replacement of existing pipe line
Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.
Hand boring Horizontally for crossing of pipe under road or any other obstacle by using Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160 mm complete.
Automated water controller switch to start or stop the pump based on water reservoir level complete in all respects.
Improvement in exisitng connections
Repair of old house connections complete in all respects.
Component -2
Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Component -3
Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.
PVC pipe 63mm o/d 6Kg/sqcm
Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.
PVC pipe 63 mm o/d
Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25.
PVC pipe 63 mm o/d
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Painting on Board both sides including priming coat , printing & Map as per Water Supply & Sanitaton standard.
Cost of Component -4 (Operation and Maintenance)
Provision for sodium chloride for disnfection of water Complete in all respect
Hardeep Singh Government Contractor
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .