SPL REPAIR OF MD ACCN BLDG NO LSM 76 1 TO 76 4 COY ASC (SUP) TYPE A AND FCSR AT SHILLONG CANTT AND SPL REPAIR TO MT SHED AT HQ 101 AREA AT SHILLONG CANTT UNDER GE SHILLONG

Amount

Dismantling plain or corrugated steel sheeting , any guage, thickness incl nainital or similar pattern as in roof coverings complete all as per specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as per specified and as directed.

Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete all as specified and directed

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc and n exc 1.5m in depth and getting out complete in soft.loose soil. And removing excavated material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point complete all as per specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as per specified and as directed.

Removing excavated material nexc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as per specified and as directed.

M&L for cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as per specified and as directed.

M&L for foundations, incl. rafts footing,plinth beams ,bases for columns etc type nominal mix (1:1.5:3)(20 mm graded aggregate) complete all as specified

M&L for columns,pillars,piers posts and type Nominal Mix (1:1.5:3) (20 mm grade aggregate) complete all as per specified and as directed.

M&L formwork to sides of plinth beams ,foundations and other similar works complete all as specified and as directed

M&L formwork to sides of pillars ,posts ,structs,piers,columns and like complete all as specified and as directed

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as per specified and as directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as per specified and as directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as per specified and as directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as per specified and as directed.

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as per specified and as directed.

Taking down shutters of any description nexc.1.0 Sqm each complete all as per specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as per specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as per specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as per specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as per specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as per specified and as directed.

Taking up or down steel tubing and disconnection, for 25mm bore of pipes complete all as per specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

M&L for wroght second class hard wood in scantlings framed and fixed complete all as specified and directed

Fixing only for wroght second class hard wood in scantlings framed and fixed complete all as specified and directed

M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as per specified and as directed.

S&F framed work as in doors or gates of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) complete all as per specified and as directed.

S&L 2nd class soft wood plain solid , Straight chowkats and frames, wrought , framed rebated on the solid , rounded or chamfered , put together with glue pinned at joints complete all as per specified and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as per specified and as directed.

M &L glazed skeleton hardwood shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete all as per specified and as directed.

S&F stainless steel wire cloth , 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as per specified and as directed.

S&F 30mm thk second class plain framed,panelled shutter(any number of panels) with panels of timber flat on both sides(feather edged) or of veneered particle board medium densit, wood particle board with commercial face venners,supplied and fitted to chowkats complete all as per specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as per specified and as directed.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as per specified and as directed.

S&F sheet glass ordinary quality and glazing with oil putty in square nexc 0.50sqm in each pane complete all as per specified and as directed.

S&F 18/19 mm thk block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work complete all as per specified and as directed.

S&F 12 mm thk block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work complete all as per specified and as directed.

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F aluminium anodised 150 mm long barrel tower bolts of extruded section and fixed complete all as per specified and as directed.

S&F aluminium anodised 100 mm long barrel tower bolts of extruded section and fixed complete all as per specified and as directed.

S&F aluminium handles cast type 150 mm anodised complete all as specified and as directed

S&F aluminium handles cast type 100 mm anodised complete all as specified and as directed

S&F butt hinges 100mm medium weight mild steel cold rolled and fixed complete all as per specified and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as per specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

Prelaminated particle board of 12 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as per specified and as directed.

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M & L 75mm thick PCC 1:3:6 type C2 as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing precast cement concrete set in CM(1:4) type B1 1:2:4 (20mm graded aggregate) in landing,cover slabs, shelves and similar artilces with plain faces incl. formwork complete all as per specified and as directed.

M&L MS TMT bars 10mm dia and over out to length , bent to shape required ,including cranking ,bending spirally for hooping for columns ,hooking ends and binding with and incl. MS wire(annealed) not less than 0.9 mm dia or securing with clips complete all as per specified and as directed.

M&L MS TMT bars 5mm dia and over out to length , bent to shape required ,including cranking ,bending spirally in stirrups with and incl. MS wire(annealed) not less than 0.9 mm dia or securing with clips complete all as per specified and as directed.

M&L non skid ceramic joint free tiles 7 to 8mm thick lightshade(Square/rectangular) polished area of each tiles exc 0.18 sqm but nexc 0.38 sqm in floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as per specified and as directed.

All as Per ItemNo.60 above but in vertical surfaces such as skirting/dado laid over and incl. a backing coat of 10 mm thk CM1:3 complete all as per specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/ 300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab complete all as per specified and as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as per specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as per specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as per specified and as directed.

Supply only Integral waterproofing compound complete all as per specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as per specified and as directed.

S&F Steel work in tublar trusses including special shaped washer etc complete all as per specified and as directed. using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as per specified and as directed.

S&F GI frame work for snaprid false ceiling comprising of GI perimeter channel 0.55 mm thick Main T-flange of 25mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm/cc using GI wire of 4 mm thickness GI frame will be 60 x 60 cm to recieve E-Board ceiling complete all as specified and as directed

M&L 4mm thick E board 600 x 600 mm perpainted fibre boards ceiling designer/decorative type with different designs as approved by Engr-in-charge fixed or laid in ceiling timber/GI/aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as per specified and as directed.

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads complete all as per specified and as directed. make Jaguar/Marc/Parryware

S & F in repair 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as per specified and as directed.

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as per specified and as directed.

S & F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as per specified and as directed.

S & F in repair PVC (SWR) bends 110mm dia complete all as specified and as directed

S & F in repair PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as per specified and as directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No.81 above but for 20mm dia (Bore) complete all as per specified and as directed.

All as per Item No.81 above , but for 25mm dia (Bore) complete all as per specified and as directed.

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as per specified and as directed.

S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as per specified and as directed.

S&F 25mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as per specified and as directed.

S&F in repairs 20mm dia harrison rails, chromium plated with wooden finished fancy type with fixing brackets stops,rollers etc complete all as per specified and as directed.

S&F in repairs 20mm dia double rod brackets stops ,rollers etc wooden finished all complete all as per specified and as directed.

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as per specified and as directed.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as per specified and as directed.

Complete removal of existing wall treatment surface and applying two finishing coat of white wash on old surfaces complete all as per specified and as directed.

Complete removal of existing wall treatment surface and applying two finishing coat of acrlyic emulsion paint , anti fungal resistancr ,dirt resistance exterior paint required shade incl. primer coat on new surface complete all as per specified and as directed.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as per specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and treated with two coats of synthetic enamel paint over one coat of pink primer complete all as specified

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and appyling two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

M&L for preparation of new steel surfaces exc 10cm width or girth and appyling two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

S&F sinks made of stainless steel 1mm thick kitchen or lab with plugs,washers and wastes ,incl. bedding in cement mortar on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 990x420 double bowl with size 410x330x160 complete all as specified

S&F 15mm bore brass CP swinging mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as per specified and as directed.

S&F in repairs vitreous china EWC with P or S Trap incl. seat cover closed pattern with flat bottom and cover and MS CP hinging device ,PVC flush bend pipe incl PVC flushing cistern 10 ltr capacity ,Low level valve less , Symphonic action type , white , with inlet , Ball valve , float and handle incl. 32mm dia PVC flush pipe, a pair of cast iron brackets duly painted/ erecting stand incl. cutting and pinning in Ends ,Making good disturbed surfaces in CM 1:3 Incl. taking down unserviceable flushing cistern and connected items of any descriptions , complete all as per specified and as directed.

S&F in repair vitreous china clay wash hand basin of size 550x400 mm incl. pedastal pattern complete all as specified and directed

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repairs brass CP tubular towel rail 20 mm dia , 60 cm long incl. brackets complete all as per specified and as directed.

S&F in repair single lever basin mixer with popup waste with 450 mm long braided hoses of complete all as per specified and as directed.make jaquar Cat part No:- KUP-35051BPM or equv. In Marc/parryware/Prayag

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag complete all as per specified and as directed.

S&F in repairs Soap dish holder of complete all as per specified and as directed.make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag

S&F in repairs towel rings square shape stainless steel of make jaguar cat part no:- AKP-35751P or equivalent in Marc/Parryware/Prayag complete all as per specified and as directed.

S&F in repairs corner glass shelf with bracket of complete all as per specified and as directed. Make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware complete all as per specified and as directed.

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete all as per specified and as directed. 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F CP Hand shower 27x27 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera complete all as per specified and as directed.

S&F stainless steel kitchen plate of size 24'x30'10' with all fitting and fixtures for installation of plate rack complete all as specifeid and directed

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switchcomplete all as per specified and as directed. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No. 113 here in before but for one bell point controled by one bell push complete all as per specified and as directed.

Description all as per Srl item No.113 here in before but for socket outlet point 5 Amp on same board complete all as per specified and as directed..

Description all as per Srl item No.113 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 113 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix in repair switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix in repair bell Push (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix in repair socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix in repair switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing in repair ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing in repair call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing in repair LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

S & F in repair wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings

S & F in repair wall light fittin (Florette) Alabaster glass for diffured light effect, recommended to use with energy saving lamp and synchonised design concept with 4 watt complete with necessary connection compelete all as specified and as directed Make- Havells Item code- LHFOAIC1TZ11010

S & F in repair wall mounted LED 7 watt fncy picture light (wram type) in gold colour fittings with all accessories, integrated electronic driver and fixed to wall suitable size complete all as specified and as directed including taking down old unserviceable light fittings MAke - Philips cat no 31402-7 watt

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation. Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia complete all as per specified and as directed. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe.

S&F bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm.

S & F in repair Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.

Supply and fixing in repair LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix in repair MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

Excavation in trenches not exceeding 1.5mtr. In depth and not exc 1.5mtr in width and getting out in soft/ loose soil for laying of cable etc

Returning ,fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick.

Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from strting point.

Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications :-

S&F Factory made (Dust and power Jet Proof according to IEC 60529) opaque junction box of size 800 x 300mmx 170 mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , with locking arrangement suitable for fixing TPN DB 4 way and energy meter single phase with glass for showing meter reading and 2 Nos M40 size cable gland and one M32 size gland suitable up to 16 Sqmm cable etc complete all as specified and directed including taking down old unserviceable junction box. Make : HENSEL/Sintex. .

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

S & F in repair Slim desingn LED recessed square PLUTO NEO 2X 2, 28 watt flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified make- Philips full glow high efficiency

S & F in repair Wall bracket decorative LED with lamp 12 Watt complete with necessary connection including taking down old unserviceable one

S & F in repair LED down lighter with lamp 12 Watt complete with necessary connection including taking down old unserviceable one

S & F in repair Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one Make Bajaj/Havell's/CG.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

Supply and fixing GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed for following sizes 40 MM dia bore

Supply and fix in repair MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 10 Sq.mm 2 core , confirming to IS specifications .

KB Singha and Associates

M/s J. C. CONSTRUCTION

M/s A L Traders