SPECIAL REPAIRS TO BLDG NO.P-201 (SRW-36) INCLUDING CERTAIN REVENUE WORKS (REV-29, 23) AND MINOR WORKS (MW-29, 47, 30, 42, 48 ) AT SI LINES UNDER GE BHOPAL.

Amount

COMMON ITEMS FOR JOB 'A', 'B', 'C', 'D', 'E', 'F', 'G' & 'H'

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 Mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH]

S&F CPVC SDR 11 and plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors complete all as specified and directed [MAKE:-ASTRAL/ PRINCE as approved by GE]

S&F Bib cock, 2 way double handle with flange, cast copper alloy, chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.7212) or equivalent in JAGUAR/CERA as approve by GE]

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8328) or equivalent in JAGUAR/MARC as approved by GE]

S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent in JAGUAR/MARC as approved by GE]

S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH]

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE:-JOHNSON ENDURA or equivalent in SOMANY/ KAJARIA/ORIENT as approved by GE]

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE]

S&F Ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE]

S&F MCB SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 5 to 32 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed. [MAKE: Siemens/ Legrand/ Schinder/L&T as approved by GE]

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard dense soil complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance exceeding 1.5km but not exceeding 5 km and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

OTHER THAN COMMON ITEMS FOR JOB 'A'

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid on vertical surfaces, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE:-JOHNSON ENDURA or equivalent in SOMANY/ KAJARIA/ORIENT as approved by GE]

M&L for vitrified light shade flooring tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/NITCO]

M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ NITCO]

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/KAJARIA/NITCO]

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ NITCO]

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (area not less than 1.5 sqm each granite slab, table rubbed and polished) in floors and like; in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 18-20 mm thick granite tiles (of any type) in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ NITCO]

Fixing only of tiles of any size, type & thickness over existing floor finishes with approved tile adhesive complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for making good under cills and over archs, lintels and bressummers including all pinning where necessary in cement mortar 1: 6 complete all as specified and directed.

S&F and fabricating powder coated aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed. [MAKE: JINDAL/ AJIT INDIA/ HINDALCO]

S&F Sheet glass 4.8mm thick, ordinary quality and glazing to aluminium door, window & partition including pad/gasket, area exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size complete all as specified and directed.

S&F Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type C-22 , 100 mm size complete all as specified and directed.

S&F Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed.

S&F Aluminium handles, cast type anodised, 100 mm size complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 100mm long complete all as specified and directed.

M&L for factory made Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M&L for factory made Second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F powder coated aluminium mesh, guard/grill of size 50mm x 50mm & wire 5 to 6 mm thick of approved make and pattern cut to the size as required at site and fixing to the aluminium window frame fixed with and including aluminium F- channel and meeting channel complete all as specified and directed.

S&F Soap dish disc (oval) type, mild steel Chromium plated of approximate size 100 x 50 x 10 mm complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-45) or equivalent in PARRYWARE-SLIMLINE/CERA as approve by GE]

S&F Towel Ring of brass chromium plated fixed with and including Chromium plated brass screws complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-11) or equivalent in PARRYWARE-SLIMLINE/CERA as approve by GE]

S&F hand shower (health faucet) with 8mm dia 1.0 mter long flexible tube and wall hook complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-86) or equivalent in JAQUAR/MARC as approved by GE]

S&F Mild steel Chromium plated grating 100 mm dia with waste hole, fixed to Nahani traps complete all as specified and directed.

S&F PVC low level flushing cistern 10 liters capacity dual flush, ISI marked, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY smart dual flush , Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE]

S&F tubular towel rail of aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-40) or equivalent in JAQUAR/MARC as approved by GE]

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. [MAKE:-RAJSHRI PLASTIWOOD/ M/s SINTEX INDUSTRIES/ M/s POLY WINDOWS / M/s DURA PLAST/ M/s ACCUCELL]

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. [MAKE:-RAJSHRI PLASTIWOOD/ M/s SINTEX INDUSTRIES/ M/s POLY WINDOWS / M/s DURA PLAST/ M/s ACCUCELL]

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (single Y) equal or unequal, 75mm bore complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (single Y) equal or unequal, 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and directed.

S&F bathroom cabinet of hard thermosetting plastic of size 622 x 422 mm, fitted with superior quality distortion free 4 mm thick mirror complete all as specified and directed. [Make: PRAYAG (Model No. 555) or equivalent in NEELKAMAL/ PARRYWARE.]

S&F in repairs Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 430mm x 510mm x 203mm, bowl size:- 430mm x 380mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed. [MAKE:- Prayag (Cat No.1218D Gloss) or equivalent in NIRALI/BLUE STAR as approved by GE]

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120676) or equivalent in PRAYAG/ CERA/PARRYWARE /HINDWARE as approved by GE.]

S&F wall mixture non-telephonic with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.7365 or 7265) or equivalent in JAQUAR / PLUMBER / MARC as approved by GE]

S&F vitreous china wash down water closet pan, pedestal pattern concealed, ISI marked, white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed. [MAKE:-SOMANY (EWC concealed) or equivalent in ERA/PARRYWARE/HINDWARE as approved by GE.]

S&F chromium plated shower rose 125 mm size with swivel joints complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-73) or equivalent in JAGUAR/CERA as approve by GE]

S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent in JAGUAR/MARC as approved by GE]

S&F corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing 300mm size complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-44) or equivalent in JAGUAR/CERA as approve by GE]

S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12.5 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-43) or equivalent in JAGUAR/CERA as approve by GE]

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.

S&F Toilet paper holder of mild steel Chromium plated ‘D’ type, fixed to walls with chromium plated brass screws complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-48) or equivalent in JAGUAR/CERA as approve by GE]

S&F Jet spray (butterfly) with 1 mtr tube complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-18) or equivalent in JAQUAR / PLUMBER / MARC as approved by GE]

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8602) or equivalent in JAGUAR/MARC as approve by GE]

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (angle type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.8610) or equivalent in JAGUAR/MARC as approved by GE]

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST

M&L for Plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area not exceeding 3 Sqcm complete all as specified and directed.

S&F prelaminated particle board 9mm thick, exterior grade, pre-laminated both sides with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed.

S&F prelaminated particle board 19mm thick, exterior grade, pre-laminated both sides with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed.

S&F Magnetic catches with steel body ‘H’ type, fixed to shutter size not less than 40mm complete all as specified and directed.

S&F Brass handles, cast type, polished bright, 75 mm size complete all as specified and directed.

S&F Continuous (Piano) hinges, brass, 40 mm width of flaps (when open) complete all as specified and directed.

M&L for rendering 15mm thick in in cement mortar 1:4 on faces of brick work or concrete surfaces; mixed with water proofing compound (water proofing compound to be measured & paid separately as supply only) and finished fair and even complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed. [MAKE: ACCOPROOF/WATER SEAL/MC BOUCHAMIE, MUMBAI/FOSROC/CICO/PIDILITE]

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Preparing new plastered or un-plastered surfaces of wall and M&L for applying two coats of distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed. [NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.]

Preparing new plastered or un-plastered surfaces of wall and M&L for applying two coats of exterior acrylic emulsion paint, white or tinted over and including a coat of exterior wall primer on plastered surfaces complete all as specified and directed. [Make:- Ace Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] [NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.]

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior acrylic emulsion weather coat paint, white or tinted complete all as specified and directed. [Make:- ACE or M/s Asian Paints or WALL MASTA of M/s Berger or equivalent in M/s Shalimar as approved by GE] [NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.]

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats distemper oil emulsion, white or tinted complete all as specified and directed. [NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.]

M&L for applying 3mm thick wall care putty complete all as specified and directed. [Make: Birla/JK]

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

S&F decorative mild steel chromium plated, 19mm dia, minimum thickness 1mm, curtain rod with side fixing brackets, rings & decorative knobs complete all as specified and directed.

M&L for varnishing on surfaces of wood and wood based materials of any description over 10 cm in width or girth including cleaning and preparing the surface and applying under coat & finishing coat with synthetic varnish complete all as specified and directed.

Dismantling asbestos cement/FRP (corrugated, semi-corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section, in framed work in any position complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in framed work in any position complete all as specified and directed.

&F Rolled mild steel/tubular sections conforming to Fe 410-W (Gde E-250) quality -A as in roof trusses (framed) and trussed purlins, cross beam, rafters, posts including distance pieces, cleats etc complete all as specified and directed.

S&F Rolled mild steel flat as wind ties conforming to Fe 410-W (Gde E-250) quality -A including securing bolts and all necessary drilling, bolting complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL]

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in ridges, etc, fixed with & including self tapping screws complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL

M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES]

S&F stainless steel plate rack of minimum size 31”x36’x10” fixed with screws on wall complete all as specified and directed. (Make : PRAYAG (Model No P-348) or equivalent in NEELKAMAL/PARRYWARE

S&F stainless steel plate rack of minimum size 24”x30’x10” fixed with screws on wall complete all as specified and directed. (Make : PRAYAG (Model No P-330) or equivalent in NEELKAMAL/PARRYWARE

M&L for cleaning & drying thoroughly existing surface of walls, roofs, chajjas, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting; applying two coats of polymer modified cementations based protective & water proofing coating as per manufacturers instruction complete all as specified and directed. [MAKE: ACROCOTE / FOSROC or equivalent as approved by GE]

Taking down existing old roof treatment of any description, type and in any position including removal of old tiles, screed, felt, etc complete all as specified and directed.

M&L for providing 65mm thick (average) cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in leveling course, slope correction, etc finished even & rough mixed with and including water proofing compound (PIDIPROOF of M/s Pidilite Industries Ltd or STP No.1 of M/s STP Ltd), mixed in proportion 200ml per 50 kg bag of cement complete all as specified and directed.

M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 KG/SQM and thickness of membrane not less than 3mm having thermal insulation with white mineral/gravel finish on upper side of membrane uniformly embedded during manufacturing process laid in following sequence complete all as specified and directed.:- (a) Applying 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for seven days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment. (b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment. (c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated. (d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. (e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. NOTE:- (i) Work of water proofing treatment shall be carried out by the authorised applicator of the manufacturer. Necessary documentary evidence in support of the authorised applicator will be submitted to Engineer-in-charge before the commencement of water proofing work. (ii) The quoted rates is deemed to include for the cost of scaffolding, T&P, etc required for execution of the work.

Disconnecting existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting, if required, reconnecting and refixing in position (cleaning, repairing etc to be measured separately) complete all as specified and directed.

OTHER THAN COMMON ITEMS FOR JOB 'E'

Use & waste of Form work to edges of concrete flats, openings, floors & roofs and sides of RCC/PCC bands in walls and similar work exceeding 20cm wide for fair finished surfaces of concrete complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns pillars, boundary pillars and posts (including caps & bases) complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

S&F reinforced concrete pipes, class NP2, 300mm bore, laid and jointed with collars complete all as specified and directed.

OTHER THAN COMMON ITEMS FOR JOB 'C'

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in louvers and jallies 35mm thick (measured solid) of approved design/style including all mouldings and set in cement mortar 1:4 complete all as specified and directed.

S&F reinforced concrete pipes, class NP2, 100mm bore, laid and jointed with collars complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

OTHER THAN COMMON ITEMS FOR JOB 'D'

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions 20mm bore complete all as specified and directed. [MAKE:-JAINKO/GEM/SOMA /SHAKTI/CORONET]

S&F Cast iron Nahani trap with grating including jointing to waste pipe in cement mortar, dia of outlet 75mm complete all as specified and directed.

Cutting existing steel tubing 15mm bore for alterations or additions in position without taking down/up complete all as specified and directed.

Cutting existing steel tubing 20mm bore for alterations or additions in position without taking down/up complete all as specified and directed.

S&F Low density polyethylene pipes (LDPE) 50 mm bore of pressure rating 6 Kgf/Sqcm, laid in trenches complete all as specified and directed.

S&F High density polyethylene pipes (HDPE) 50 mm bore of pressure rating 6 Kgf/Sqcm, laid in trenches complete all as specified and directed.

OTHER THAN COMMON ITEMS FOR JOB 'E'

M&L for grouting of slab/beam by fixing 12 mm dia PVC nozzles and pressure injection of cement slurry (50 kg of cement mixed with 225 gms of Pidicrete SM of M/s Pidilite Industries Ltd or Cabex 100 of M/s Fosroc Chemeicals) with pressure not less than 3 M including necessary drilling, plugging nozzles, etc as per manufacturer’s instructions complete all as specified and directed. NOTE: The treated area should be ponded with water for 48 Hrs by flooding the surface.

OTHER THAN COMMON ITEMS FOR JOB 'F'

M&L for concealed point wiring for one light/fan/exhaust/bell point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and capping of size 25 mm , ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS muti-stranded copper conductor (green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be concealed in wall, duly painted with two coats of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked for mounting of fittings like switches, sockets, fan regulators, etc. fixed with galvanised screw and cup washer complete all as specified and directed. [Make of Cable : V-MARC/ Plaza/ Havells as approved by GE] Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Rate includes chase cutting for concealed wiring.

S&F Integral LED Street light luminaire of 25 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses, LED street light luminaires with IP 65 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro(Cat no. LR02-291-XXX-57-XX) or equivalent in Philips/ Crompton/Bajaj/Havells/LUKER as approved by GE.]

S&F Street light brackets made out of GI tubing, light grade, 32 mm bore 1200mm long, bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

S&F LED four arm aluminium casted decorative pole antique light with B-22 LED bulb fitting, victorian design, IP-65 protection, length of pole not less than 9 feets complete all as specified and directed. [Make: As per sample kept in AGE E/M office and all as approved by GE]

S&F LED lamp 10 watt, B-22 holder base with polycarbonate body and aluminium heat sink complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 6 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

OTHER THAN COMMON ITEMS FOR JOB 'G'

S&F non clogging pump set, capacity 5 HP with all accessories and connecting to electric system with suitable PVC Aluminium stranded conductor of required length complete all as specified and directed. [MAKE: CG/ KIRLOSKAR as approved by GE]

OTHER THAN COMMON ITEMS FOR JOB 'H'

M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in and including non metallic rigid PVC casing capping not less than 25mm base size with all fitting and fixing accessories including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly by suitable lugs, sunken sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of fittings like switches, sockets, fan regulators, etc. with 3mm thick laminated hylum sheet cover complete all as specified and directed. [Make of Cable : V-MARC/ Plaza/ Havells as approved by GE] Note : Wiring to be done as per approved colour code in IE rule.

All as per BOQ item No.150.10 above, but for 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per BOQ item No.150.10 above, one 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per BOQ item No.150.10 above, but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination for 3 pin socket out let 15 amp independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F Switch socket combination, multipurpose, 5 pin, 5/6 Amp, flush type, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/HAVELLS as approved by GE]

S&F Socket outlet multipurpose having provision for 2 & 3 pin, 6 Amp flush type, 240 volt AC complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/HAVELLS as approved by GE]

S&F switch socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type, 230 volt AC complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/HAVELLS as approved by GE]

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings with & including LED lamp white 9 watt retrofit, 230 volts complete all as specified and directed. [MAKE FOR HOLDER:-ANCHOR (PENTA PC series)/ LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE] & LAMP : BAJAJ/PHILIPS/SYSKA]

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 way, Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 complete all as specified and as directed. [MAKE: Siemens/ Legrand/ Schinder/L&T/ ABB as approved by GE] NOTE:- MCB shall be measured and paid seperatly.

S&F MCB SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 40 to 63 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed. [MAKE: Siemens/ Legrand/ Schinder/L&T/ ABB as approved by GE]

S&F MCB SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 40 to 63 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed. [MAKE: Siemens/ Legrand/ Schinder/L&T/ ABB as approved by GE]

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE :- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

S&F LED 20 W/21Watt tube light fitting (T8 type) with and including LED retrofit tube 20/21 W, 240V, PV > 0.90, colour Temp 6500 K, system luminious efficancy > 100Lm/W complete with powder coated CRCA decorative box type batten suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. [Make: Bajaj/ Philips/Wipro/Crompton/Syska/Havells/Luker as approved by GE].

S&F Wall fan, 400 mm sweep complete all as specified and directed. [MAKE: BAJAJ Neo Spectrum or equivalent in Havells/ Cropmton as approved by GE]

Deduct schedule of credit (calculation will be done off line) Rs.37,850.00

RAJPATI CONSTRUCTION

Neelam Traders

M/S RAKESH TRADERS

MS Soumya consultants and designers