Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹72.8 LAccepted-AOC | L1 | Accepted-AOC The lowest tenderer | |
| 2 | L2₹78.7 L+₹2.3 L (3.04%)Rejected-Finance | L2 | Rejected-Finance Not the lowest tenderer | |
| 3 | L3₹84.9 L+₹8.5 L (11.1%)Rejected-Finance | L3 | Rejected-Finance Not the lowest tenderer | |
| 4 | L4₹90.5 L+₹14.1 L (18.5%)Rejected-Finance 0 3 SHASTRI STREET FEROZEPUR CITY PB 152002 | FEROZEPUR CITY | FEROZEPUR | PUNJAB | 152002 | L4 | Rejected-Finance Not the lowest tenderer |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
17 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
SPL REPAIR TO BLDG NO T 7 BSO YARD AND T-26 08 MD ACCN AND INTERMEDIATE SEWAGE PUMPING STATIONS (IPSs AND PROVN OF GUARD ROOM WITH TOILET AT FAFIRKOT MIL STN
2024_MES_650499_1
CA NO CWE SGNR T-89 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE FARIDKOT
As per NIT
9 documents required · 9 mandatory
₹1,000
GE FARIDKOT
₹1.7 L
21 Jun 2024
19 Apr 2024
18 May 2024
19 Apr 2024
17 May 2024
3 May 2024
Amount
Dismantling plain or corrugated steel sheeting any gauge,thickness, including Nainital or similar pattern roof covering in any position including necessary steel double scaffolding complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, Including bending in curve if required fixed with self tapping screws as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, Including bending in curve if required fixed with self tapping screws as specified and as directed.
S&F 600 mm dia Non Power Driven Full SS Air roof turbo ventilator fixed at roof with necessary bolting/welding Complete all as specified and directed.
M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for including necessary steel double scaffolding complete all as specified and as directed.
S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
S&F Fe-290(Gde-E-165) framed work as in doors or gates of angle or other section with gusset plates, rails, braces with ornamental and intricate design . Complete drilled for fixing of steel sheeting or other covering . Door , etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiftting (exc. of steel sheeting or other covering ,running rails and guides ) and hanging ; also fastening and fixing complete all as specified and directed .
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for PCC (1:2:4), type B-2, (using 40mm graded stone aggregate) as in hardstanding, mass concreting including forming necessary glass joints complete all as specified and directed.
M&L for PCC 75mm thick (1:3:6), type C-2, (using 40mm graded stone aggregate) 75mm thick as in plinth protection complete all as specified and directed.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified and directed
M&L Hard core of broken stone or boulders gauge not exc. 63mm deposited spread and leveled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified.
Demotion of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge
M&L brick work fly ash Sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
M&L for rendering 15 mm thick in cement mortar 1:4 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement
M&L for PCC 75mm thick (1:4:8), type D-2, (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified & directed by Engr-In-Charge. Note : Payment for providing grooves shall be made separately.
M & L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for PCC 1:4:8, Type D2, as in sub base (40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed by Engr-In-Charge.
M&L for sand filling under floors 25 mm thick including watering and consolidation etc complete all as specified and directed by Engr-In-Charge.
Material & Labour for Machine pressed precast concerte interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment all as specified and directed by Engr-In-Charge.
All as per Ser item No 23.00 above but expect paver blocks.
S&F in repair Steel windows or ventilators, fixed type, with glazing complete all as specified and directed.
M & L in repair in Pre-cast cement concrete block in kerbstone PCC 1:2:4, type B1, masonry with solid blocks, exc/n exc 10cm in width and setting in mortar 1:4. including necessary form work, on sides of roads including necessary excavation embedding blocks in ground to depth as directed and finishing exposed surface even and smooth complete all as specified & directed by Engr-In-Charge.
S&F Steel windows or ventilators, fixed type, with glazing bar complete all as specified and directed.
M&L for taking down cement plaster from ceilings & brick walls including wall tiles / terrazzo / kota stone etc. any type of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-In-Charge.
M&L for rendering 15 mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement
M&L Preparation of new plastered surfaces of wall applying two coats of white wash complete all as specified and directed by Engr-In-Charge.
Preparation of newly plastered/ RCC surfaces of walls and applying two coats of cement base paint complete all as specified & directed by Engr-In-Charge.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25 cm complete all as specified and directed.
M & L for Cement concrete in foundations, filling and mass concrete, type C2, (1:3:6 ), (40 mm graded stone aggregate) complete all as specified and directed.
Removing excavated material not exc 50 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
S & F In repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors/ in walls including necessary clamps and bends complete all as specified and directed by engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M & L for roughening surface of old concrete floor for picking sweeping clean and washing down complete all as specified and directed.
S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete all as specified as directed by Engr-in- Charge
S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete all as specified as directed by Engr-in- Charge
All as per Ser item No 40.00 above but as in vertical surfaces such as skirting, dados & risers to steps etc over and including 10 mm thick backing plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work. Note : Highlighter shall be provided as directed by Engr-in-Charge.
M&L 25mm thick plain cement concrete 1:2:4, type B-0, using 12.50 mm graded stone aggregates as in floor/ sub floor concrete complete all as specified and directed by Engr-In-Charge.
M&L Machine cut kota stone slab in flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 20 mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified.
M&L Machine cut kota stone slab as in flooring of 20-25 mm thick, set and jointed in cement slurry over & including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified & directed by Engr-In-Charge.
Dismantling of Stone slabs of any description or thickness in floors, plateform, apron etc laid bedded and pointed in any mortar including removing rubbish material from building and thrown in low lying empty area at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.
M&L Green Marble 20mm thick work (of any type) (table rubbed and polished) in Window cill over and including 20mm thick screed bed in CM 1:6 and including pointing in cement mixed with pigment to match the shade of green Marble including nosing edges complete all as specified and directed .
M&L in repair for RCC 1:2:4, B1, (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves and all as specified.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed by Engr-In-Charge.
M&L for TMT Bars of 6mm to 8mm dia,cut to length,bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip all as specified.
M&L old size brickwork with Sub Class Brick B straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified and directed.
All as per Ser item No 51.00 above but except bricks.
Taking down of chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified.
Taking down of chowkats or frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified
M&L for Taking down Shutter of any description exc 1 sqm nexc 2 Sqm each complete all as specified and directed.
M&L for Taking down & Refixing of Shutter in same opening of any description exc 1 sqm nexc 2Sqm each complete all as specified and directed.
S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified
Material and labour for steel framed work such as grills, gratings, etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe-290. Gde-E-165 complete all as specified and directed by Engr-In-Charge.
M&L PCC 1:3:6, type C0, using (12.5mm graded stone aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork complete all as specified and directed by Engr-in-Charge
S&F 35 mm thick 2nd class hard wood plain framed pannel shutters (any number of pannels) with pannels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed by Engr-in -Charge
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats.
S&F Steel windows with side hung shutters box type including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed by Engineer-in-Charge.
S&F Steel windows with side hung shutters box type including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed by Engineer-in-Charge.
Supply & fixing Factory made prefabricated Pressed steel Door frame made out of mild steel 1.25mm thick girth of frame 185mm including necessary MS rawl plug/bolts and fixing 75mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with Locking arrangement using mild steel mortise lock 4 levers with 2 Nos of keys of size 100mm including MS chromium plated handle and 2 Nos MS locking rods out of 8 mm dia not exc 1000mm long fixed to mortise lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a coat of zinc chromate primer on interior surface (not -visible from front) and hammer tone paint on exterior surface ( visible from front) as per Godrej Pattern complete all as specified and as directed by Engineer-in-charge.
S&F sheet glass of 4mm,ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane,complete all as specified.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge.
S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F Solid wood moulded grain printed PVC Door Frame of size 50mm x 95 mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, egdes will be painted to match printed sheets, in opening as per specification & drawing.
S&F Factory Made Solid PVC Moulded Door Shutter, with core, 28 to 30mm thick (styles), with 2, 4, or 6 raised panel design with 2mm thick Woodgrain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.
Dismentling of boarding any description fixed in any position with nails complete all as specified.
M&L for 18mm thick plywood grade BWR type BB fixed with screws to frame work alongwith both side 1.5 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved by Engineer-in-Charge including PVC lipping complete all as specified.
S&F continuous (piano) hinges 30 mm width of flap, stainless steel bright finish or electrogalvanised of complete all as specified.
S&F 150 mm long aluminium handles D type anodised complete all as specified and directed.
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 125 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasps staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed
S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F 100 mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.
M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.
M&L preparation old painted steel surface any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified.
M&L preparation of new or previously untreated surface of wood or wooden based surfce any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of old painted surface of wood or wooden based surface any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified
S&F in repair MS powder coated decorative drapery rod (colour as approved) of 20mm dia approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified
M&L for preparition of new plaster surfaces and applying two coat of weather proof exterior over one coat of exterior primer using hand roller complete all as specified
M&L Rendering 10 mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over chalk whitening complete all as specified & directed by Engr-In-Charge.
M&L in repair to RCC fillet beams in ceiling with cement mortar 1:3 over applying a coat of neat cement slurry @ 3kg/sqm complete all as specified and directed
M&L preparation of newly plastered or unplastered surfaces of wall applying two coats of distemper oil emulsion white/tinted with a wall care putty finished surface by hand roller complete all as specified and directed by Engr -in - charge.
M&L for complete removal of existing treatment of old decorated surfaces of wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of distemper oil emultion white/tinted with a wall care putty finished surface using roller complete all as specified
M&L preparation of newly plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed by Engr -in - charge.
M&L preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engr -in - charge.
Taking up or down 15mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified.
All as per Ser item No 94.00 above but 20mm dia
S&F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors, ceiling complete all as specified.
All as per Ser item No 96.00 above but except tubes.
S&F 20mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors, ceiling complete all as specified.
All as per Ser item No 98.00 above but except tubes.
M&L preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified & directed by Engr-In-Charge.
S&F in repair 15mm angle cock/ stop cock with flange cast copper alloy, chromium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge.
S&F in repair 15mm bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified by Engineer in Charge.
S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified by Engineer in Charge.
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor all as specified
S&F in repair PVC 10 litre capacity valve less syphonic action type, flushing cistern, low level, white/coloured with inlet ball valve, float, pvc bend and handle including brackets, etc. complete all as specified by Engineer in Charge.
S&F in repair Wash hand basin angle back 400x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified by Engineer in Charge
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.
M&L preparation of new plastered surfaces and applying three coats of white wash on ceiling as specified & directed by Engr-In-Charge.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair stainless steel plate rack 1.00 mm thick of size 900x600x250mm made out of 1mm thick stainless steel of first quality complete all as specified and directed by Engr-in-charge
S & F in repairs brass chromium plated overhead shower 125mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed by Engineer in Charge.
S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.
S&F in repair mild steel peg set 175mm to 250mm with hooks fixed to wall complete all as specified and directed by Engr-in-Charge
Dismantling CI/PVC pipe alongwith fittings of 75/100mm dia,below or above GL, laid in floors or fixed to walls jointed in cement mortar and taking out complete all as specified
S&F PVC (SWR) bend any radius 110 mm bore
S&F 100mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints laid in trenches, in floors or fixed to walls complete all as specified and directed by Engineer-in-Charge.
All as per Ser item No 117.00 above but 75mm bore pipe complete all as specified.
S&F in repair 100 dia CI bends, diminishing pieces or tapers all as specified
All as per Ser item No 119.00 above but but 75mm dia all as specified.
All as per Ser item No 119.00 above but with fiitted with oval acess door all as specified.
M&L in repairs CI Floor trap long neck 75 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.
S&F branch pieces, 75mm dia, single (equal or unequal), ordinary of inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge.
S&F 75mm cast iron vent cowls
M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complet all as specified.
S&F three layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity hoisted and fixed in position all as specified including PVC float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe & dismantling existing water tank complete all as specified and directed by Engr-in-charge.
S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M & L for mild steel work in rolled section as in main and cross beam hip, jack rafter, channels, plates Fe-410-W (Gde-E 250) including fixing in wall with cleats/making groove/fastners etc and making good with concrete all as specified and directed.
M& L for taking down of existing detoriated celing plaster and chipping of concrete and providing 10 mm thick ceiling plaster with CM 1:3 with URP including dubbing coat, fixing of mild steel mesh complete all as specified and directed.
S & F of welded steel wire febric wt n exc 4 kg/Sqm complete all as specified and directed.
M & L for water proofing treatment to RCC sunken slab as specified below and as directed by Engineer in Charge:- (a) Deismantling of existing sunken treatment and M & L for Rendering 15 mm thick in cement mortar 1:3 using water proofing compound on raised vertical surfaces. (b) Cleaning the surface with wire brush / coir brush, removing loose material like dust particles, dirt etc. (c) Creating fillet covering of 50 x 50 mm with polymer modified mortar on the junction of slab and wall (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surface. (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating. (f) Apply second coating of two component modified polymer coating after 72 hrs. (g) Laying concrete 1:4:8 over the coating as per requirement. (h) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout. (k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) WPC shall be measured and paid seperately.
M&L cement concrete 75 mm thick type, C2, 1:3:6, using 40mm graded satone aggregate as in plinth protection/path finishing surfaces even and fair (without using extra cement) all as specified
Demolition and breaking up drain pipes 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and sdirected.
M&L 150mm bore NP2 drain pipes laid in trenches and jointed as specified
M&L 150mm bore Concrete bed (PCC 1:3:6 type C2) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and sdirected.
M&L for Rendering 10 mm thick in cement plaster 1:4 with WPC on , fair faces of brick work or concrete surfaces all as specified and directed by Engr -in - charge. Note : WPC will be measured and paid separately
M&L PCC 1:2:4, type C0, using (12.50 mm graded stone aggregate) as in roof kerbs & Coping complete all as specified and directed by Engr-in-Charge
Supply only Liquid water proofing compound
M&L for Roof Treatment in as specified below and as directed : (a) Cleaning and washing of surface and removing all existing dust and applying 10 mm thick cement plaster in 1:4. (b) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water) (c) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (d) Applying three coats of HydroShield PUD microfibre reinforced UV resistent polyurethane (solid content 68% ) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls. (e) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Make : DrFixit/ Asian/STP Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge.
Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
M&L Providing, cement concrete Type B0, 1:2:4, (12.5 mm stone aggregate) with WPC in roof kerbs or mud stops, roof padding , rounded or chamfered on edges complete all as specified & directed by Engr-In-Charge. Note : WPC measured and paid saperately.
M&L for 10 mm thick plaster on ceiling in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge
M&L for Preparation of old srufaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Cement base paint of approved make complete all as specified and directed by Engr-In-Charge.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork etc. and making good disturbed ground complete all as specified & directed by Engr-In-Charge.
S & F angle iron posts and struts in fencing including cutting tops of shape as directed, drilling holes, notching for wire, etc.,flat iron fillets and round bars with hooks at ends (for securing wire mesh etc.) includindall necessary drilling, bolting or riveting, etc, and similar work confirming to Fe -290 Gde E-165 complete all as specified & directed by Engr-In-Charge.
Dismantling fencing wire mesh, any type complete all as specified & directed by Engr-In-Charge.
Supply only Chain link MS galvanised fencing, any size or type complete all as specified & directed by Engr-In-Charge.
Fixing only Chain link fencing including line wires,any mesh, size and type to any type of standards,rails,straining bolts,etc. including provision of binding wire, drilling/ welding on existing posts complete all as specified & directed by Engr-In-Charge.
S & F in repair iron strip for supporting chain link fencing complete all as specified & directed by Engr-In-Charge.
S & F in repair Mild steel work 10 mm dia and over round bars as in fencing cut to length, bent to shape etc. Fe 290 (Gde - E-165) or complete all as specified & directed by Engr-In-Charge.
S & F 5 - 10 mm diameter of shank mild steel screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends.each screwed end to be fitted with washers and one hexagonal or square nut, n exc. 5 cm long complete incl making holes on existing post holes without taking down complete all as specified & directed by Engr-In-Charge.
Material and labour for providing Reinforced Cement Concrete(Design Mix) M 25 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc complete all as specified and directed by Engr-In-Charge.
M & L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blending with clean dry sand @ 0.05 Cum per Sqm complete all as specified and directed by Engr-In-Charge.
Material and labour for providing Reinforced Cement Concrete (Design Mix) M 25 using 20 mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-In-Charge.
Material and labour for providing Reinforced Cement Concrete (Design Mix) M 25 using 20 mm graded aggregate as in beams, cantilever, chajja,lintels over 1.5 m complete all as specified and directed by Engr-In-Charge.
Material and labour for providing Reinforced Cement Concrete (Design Mix) M 25 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floor, roof, landing, balcknies, canopies, decks, slab and in shelves and like complete all as specified and directed by Engr-In-Charge.
M & L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; rough finished vertical or to batter complete all as specified and directed by Engr-In-Charge.
M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished vertical or to batter complete all as specified and directed by Engr-In-Charge.
M & L formwork to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and directed by Engr-In-Charge.
Material and labour for 10 mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-In-Charge.
M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and directed by Engr-In-Charge.
M & L Cement concrete 100 mm thick type D-2, 1:4:8, (40mm graded stone aggregate) as in sub-floors, sub bases, floors and pavings, etc complete all as specified and directed by Engr-In-Charge.
M&L Machine cut kota stone slab 20-25 mm thick as in skirting, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified & directed by Engr-In-Charge.
M & L Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls, built in CM 1:4 complete all as specified and directed by Engr-In-Charge.
M&L for 5 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.
M & L rendering 10 mm thick in CM 1:3 for roof with water proofing compound complete all as specified & directed by Engr-In-Charge. Note : WPC shall be measured seperately.
Supply only integral water proofing compound (WPC) complete all as specified and directed by Engr-In-Charge.
M & L for one coat of Bitumen primer for use in waterproofing and damp-proofing treatments @ 0.70 ltr/sqm as per Para 11.44.5 of MES Schedule Part -I, 2009 complete all as specified and directed by Engr-In-Charge.
M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed by engr-in-charge.
M & L for two coats of Aluminium Paint over APP membrane complete all as specified and directed by Engr-In-Charge.
S&F Factory made box type steel window with side hung shutter including pintle hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-Charge.
M & L for 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters) in Squares n.exc 0.5 sqm each complete all as specified and directed by engr-in-charge.
Supply and fixing 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by engr-in-charge.
S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-Charge.
S & F 125 mm long aluminium handles, fabricated type, anodised complete all as specified and directed by engr-in-charge.
S & F Floor door stopper of aluminium , 75-100 mm cast iron body, with hard drawn steel spring complete all as specified and directed by engr-in-charge.
S & F 2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 Cum each complete all as specified and directed by engr-in-charge.
S&F Vitreous china bowl half urinal flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete with flush pipe and half turn valve 15mm more all as specified and directed by Engineer - in - Charge.
M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15 mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.
M & L Coloured glazed ceramic tile 450x300x7 mm/350x 250x 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including screed of 10 mm thick rendering in cement mortar (1:4) complete all as specified & directed by Engr-In-Charge.
S&F in repair of vitreous china wash basin, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, 15mm fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with long screwed shanks and flynuts, screwed for iron pipe and chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement with PVC connections 15 mm size, 450 mm long with PTMT nuts and other end fixed complete all as specified and directed by engr-in-charge.
M&L of PVC (SWR) floor trap 75 mm bore plain with grating including jointing with solvent cement fixed to wall/laid in trenches etc complete all as specified and directed by Engineer in Chrge.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position all as specified including PVC float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe complete all as specified and directed by engr-in-charge.
S&F looking mirror 6mm thick of size 600mm x 450mm on commercial ply wood 6mm thick with PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed by Engineer in Charge.
S & F PVC 10 ltr. capacity valveless syphonic action type, flushing cistern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. complete all as specified and directed by Engr-in-Charge.
S&F 15mm size, length 450 mm PVC connection with PTMT nuts complete all as specified and directed by Engr-in-charge.
S&F bib taps, cast copper alloy with crutch or butterfly handle,chromium plated screwed down, screwed for 15mm bore of iron pipe or for brass ferrule and fixed all complete all as specified and directed by engr-in-charge.
S&F 15mm bore stop valve chromium plated ,screwed down high pressure with screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by engr-in-charge.
S&F 20 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer in Charge.
S & F Swivel shower of PTMT any colour for fixing with 15mm pipe with Shower arm 15 mm size, 195mm long complete all as specified and directed by Engr-In-Charge.
S&F Tubular towel rail, Brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer in Charge.
S&F PTMT shelf fixed with and including Chromium plated brass screw and plastic cleat complete all as specified.
S & F Hat pegs with legs solid body, 225mm to 300 mm complete all as specifed and directed by Engr-In-Charge.
S&F 15mm bore stop valve chromium plated with longshank and cup (concealed type) complete all as specified and directed by engr-in-charge.
S & F PVC (SWR) bends any radius, 110 mm complete all as specified and directed by Engr-in-charge.
M & L Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed by Engr-in-charge.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified by Engineer in Charge.
M & L for cement Concrete (1:2:4), type B-1, (using 20mm graded stone aggregate) as in coping manhole cover slab, bed block of hold fast and splash stone complete all as specified.
M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. n exc 6m mean radius, built in CM 1:4 complete all as specified & directed by Engineer-In-Charge.
M & L Concrete1:4:8, type D2, bed to drain pipes; 150 mm including packing under, and haunching against the sides of pipes after they arelaid and tested; incomplete all as specified and directed by Engineer-In-Charge.
Cutting into existing manholes for connecting new drains(Internal Dia 150 mm) , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-l, smooth finished, and reforming benching as required
Surface dressing including Trimming of Natural ground, rough excavated surfaces and filled up area to remove vegetation and/or small inequalities not exceeding 15 cm deep complete all as specified and directed by Engr-In-Charge.
M & L Pre-cast cement concrete block in PCC 1:3:6 type C1 masonry with solid blocks, exc/n exc 10cm in width and setting in mortar 1:6. including necessary form work, on sides of roads including necessary excavation embedding blocks in ground to depth as directed and finishing exposed surface even and smooth complete all as specified and directed by Engr-In-Charge.
M&L for preparation new concrete/bricks surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed by Engr-In-Charge.
Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed/surface in wall/roof/ceiling surface and its accessories on the surface etc includingincluding PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 2.8 mm thick plastic laminate Hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified and as directed:-
One light point/Fan point/Exhaust point controlled by one way switch
One three pin socket out let 5 amps on the same board with other switches
One 3 pin, 5A switch socket outlet point on independent board
One light point controlled by one two way switch
One bell point controlled by one bell push
All as per Ser item No 205.00 above but with 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor.
Supply and fixing of LED tube light fiting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-charge.
M&L ceiling rose 3 terminal / PVC / polycarbonate isolated body
M&L in repair ceiling rose 3 terminal / PVC / polycarbonate isolated body
M&L submain wiring with two single core PVC FRLS insulated copper conductor 10 sqmm and same 10 sqmm for continuous earth wire drawn in to concealed PVC conduit complete all as specified and directed by Engr-in-Charge. Note: Two run wire, one run earthwire and PVC conduit shall be measured as one unit.
S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC complete all as specified and directed by Engr-in-Charge.
S&F in repair Piano type switch single pole 1 way 5/6 amps 230 volt AC complete all as specified and directed by Engr-in-Charge.
S&F socket two in one 3 Pin 5 Amps 230 volt AC complete all as specified and directed by Engr-in-Charge.
S&F Piano type switch single pole 1 way 15/16 amps 230 volt AC complete all as specified and directed by Engr-in-Charge.
S&F in repoair Piano type switch single pole 1 way 15/16 amps 230 volt AC complete all as specified and directed by Engr-in-Charge.
S&F socket two in one 5/6 Pin 15/16 Amps 230 volt AC complete all as specified and directed by Engr-in-Charge.
S&F in repair socket two in one 5/6 Pin 15/16 Amps 230 volt AC complete all as specified and directed by Engr-in-Charge.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 AMP, in the MCB DB complete testing .
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as directed
Supply and spread dry fine aggregate sand in trenches for cable cushioning all as specified on both top and bottom of cable including ramming all as specified and directed by Engr-in-Charge. Note : For the purpose of payment the punned thickness only measured.
Supply and lay bricks sub-class ‘B’ of standard size laid in trenches of across the cable protection all as specified and directed by Engr-in-Charge.
Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and brick for protection to be measured and paid separately.
Supply and laying in replacement steel water tubing, 40 mm dia ISI Marked, '“light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified.
Supply and laying steel water tubing, 40 mm dia ISI Marked, '“light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified.
Supply and fixing LED flood light 70 watt 230 V, AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp enclosed with glass cover including fixing arrangement in road light, security light etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable suitable size as directed by Engr-in-chrg.
Supply and fixing PVC insulated stranded aluminium conductor cable PVC sheathed 2x2.5 sq.mm +1x1.5sqmm flat or circular including PVC heavy duty conduit of size 25 mm bore fixed to poles with suitable size clamps for connection of street light fitting from junction boxes complete all as specified.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement PVC Lamp holder suitable for LED 5 to 20 watt blub complete all as specified and directed.
Supply and fixing LED bulb 1x10 Watt lamp having luminous efficancy warranty 2 year all as per specification & directed.
Supply and fixing of LED tube light fiting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge.
S&F Piano type switch single pole 2 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
S&F in repair Piano type switch single pole 2 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
S&F bell push flush type 5 amps complete all as specified and directed by Engr-in-Charge.
S&F in repair bell push flush type 5 amps complete all as specified and directed by Engr-in-Charge.
S&F Bell ding dong AC 230V single pole complete all as specified and directed by Engr-in-Charge.
S&F socket two in one 5/6 Pin, 5/6 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
S&F in repair socket two in one 5/6 Pin, 5/6 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
M&L submain wiring with two single core PVC FRLS insulated copper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to existing concealed PVC conduit and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engr-in-Charge. Note: Cost of earth wire including in sub main wiring.
Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type MCB etc and making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ.
All as per Ser item No 239.00 above but in replacement only.
S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door including taking down unserviceable old DB any type, MCB etc and making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engr-in-Charge.
S&F MCCB 4 pole, 415 V. adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and preforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 including taking down old Unserviceable earthing any type complete all as specified and directed by Engineer-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is encluded in this item. (iii) Water pipe shall be provided in slainting position.
Supplying and laying factory made un-reinforced precast concrete cable cover, class EHV, type 1 with peak, size 250mm x 150mm x 40mm standard size laid in trenches of across the cable protection all as specified and directed by Engr-in-Charge.
Supply and Laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection will be measured and paid separately.
Supply and fixing in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications, including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)
Supply and laying steel water tubing, 25 mm dia ISI Marked, '“Medium grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road including taking down old Unserviceable pipe any type with all fitting complete all as specified.
Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection to be measured and paid separately.
M& L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed including taking down old Unserviceable gate valve any type complete all as specified.
Supply and fixing complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old Unserviceable light fitting any type as per specification & directed by Engr-in-charge.
Supply & fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed.
Supplying and fixing and commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostate, NRV, connection piece PVC connection for HOt and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 No nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.
Re-Fixing only electronic/electric meter single phase complete with accessories any size. two core copper flexible wire not less than 0.5 mtr for connecting from incoming to outgoing any size complete all as specified and directed by Engr-in-Charge.
Supply and fixing exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.
Re-Fixing only Exhaust fans complete with accessories any size. Three core copper flexible wire not less than 0.5 mtr for connecting from ceiling rose/connector to exhaust fan any size complete all as specified and directed by Engr-in-Charge.
S & F DBOX SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single pole complete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed .
Supply and laying Rigid non-metallic PVC conduit size 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. with all fitting including taking down old Unserviceable pipe any type complete all as specified.
S&F socket two in one 5/6 Pin, 5/6 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
S&F MCCB 4 pole, 415 V. adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed by Engr-in-Charge.
M&L submain wiring with two single core PVC FRLS insulated stranded copper conductor cable of size 4 sqmm and same 4 sqmm for continuous earth wire drawn in to concealed PVC conduit and making good to disturbed area complete all as specified and directed by Engr-in-Charge. Note: Cost of PVC conduit, conduit accessories and earth wire including in sub main wiring.
Supply and installation, commissioning of desert cooler electric driven (single phase), having nominal air flow capacity of 6000 CuM per hour (or nearest size).(*Steel body) deep galvanised steel thickness 1mm body and 1mm removal side and back panel single phase 230 volts, with submersible pump of suitable size (Maximum power consumption 250 volts) ISI mark (with float valve of 15mm dia, stop valve of 15 mm dia, nut washer PVC connections of 15mm dia to air cooler complete all as specified . Note : (a) : Sufficient length of 3 core PVE sheathed round copper cable size 23/076 to enable fixing in to plug point shall be provided by contractor. (b) Arrangement of power connections and water connections to the desert cooler will be included in installation. (c) No extra payment shall be made to float valve, stop valve, nut, wahser PVC connection, leakproof joints etc and making connection from GI pipe 15 mm dia to air cooler in this regards) nion for GI pipe ball valves brass complete including electric connection. (d) Contractor shall submit necessary company test certificate and purhase voucher and minimum warranty of 2 years complete all as specified and directed by Engr-in-Charge
Vinod Kumar Bajaj
BANSI CONSTRUCTION COMPANY
Marwaha Builders
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .