Inviting for the Supply of Building Material For Constrcution Under MRGS Fund At GP Nalfadi Taluka Rajura Dist Chandrapur

Amount

Material Supply

12.5 mm nominal size

40 mm nominal size

20 mm nominal size

30 mm thick prelaminated flush door shutter

Aggregate 40 mm (hand broken ) blasted

Aldrop

All Bearing Roller

All Frame rail angle anodized

Alluminium Screw 32*6 mm

Alluminium section

Binding Wire

Brass hanging type door stopper 150 mm

Brass tower bolt (barrel type) 250x10 mm

Bricks

C.I bracket for wash basin and sinks

Ceramic Glazed Tiles Ist quality 300x300 mm in all shades and designs of White, Ivory , Grey, Fume Red and Brown etc.

Chequered terrazzo tiles 22 mm thick(medium shade)

Coarse Sand

Concreate Mixer 0.25 to 0.40 cum with Hopper

Corner Stone 38*20*30

Steel Shuttering for Lintels, Beams, Girder, Plinth beam, Cantilever. (Per Cum of concrete)

Electric Vibrator

Fine sand (zone IV)

Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Frosted glass sheet or nominal thickness 4 mm ( weighing not less than 10 kg/sqm)

G.I pipes 50 mm dia

G.I pipes 25 mm dia

Glass plain 5 mm

Handle 150 mm Stainless Steel (Rounded Shape)

Hinge Stainless Steel 125 mm

Hire Charges of Concreate Mixer 0.25 to 0.40 cum with Hopper

Lock for Sliding Shutter

OBSERVER GALLERY PAINTING

Oxidised mild steel sliding door bolt 250x16 mm

P.V.C Connector 15mm dia

P.V.C Pipe 32 mm dia 10 kg Pressure (class IV)

Piller tap 12 mm dia. Chromium plated heavy

Plastic emulsion paint

Plumber with tools skilled

Pole with Painting

Portland Cement

Powder Coating

Rubble 80 MM

S.C.I gully or nahani grating 100 mm dia

Sinc base oil paint

Socket brass for 32mm tap

Soft Murum

Steel Centering for Colums/Pillars (Per Cum of Concreate)

Steel Centering for Foundation. (Per Cum of Concreate)

Steel Primer

Steel Shuttering for Lintels, Beams, Girder, Plinth beam, Cantilever. (Per Cum of concrete)

Steel Shuttering for Roof, landing , balcony having 12.5 cum Tk (Per cum of Concrete)

Shuttering Centering

Water

Steel TMT FE 500

Stone ware pipe 150 mm dia

Stop tap brass with crunch wheel 15mm dia.

Synthetic enamel paint, having VOC (Volatic Organic Compound content less than 150gm/litre

Terpentine

Through Stone

Tile Cutting Machine

Turpentile oil

uPVC Pipes ( working pressure 4 Kg/cm2 ) Single socketed pipe 75 mm dia

Vibrator ( Needle type 40 mm)

Vitreous China orrisa type w.c pan size 580 mm

Vitrified tile ( Matt finish). Size 590 to 605 mm X590 to 605mm X 8 to 10mm.

WALL PAINTING BOTH SIDE

Water tank H.D.P . Container syntex or alike

White cement based putty

White glazed wash hand basin (55x50) cm

Moorum

Vibratory Roller *8 to 10 tonne

Water Tanker 5 to 6 KL Capacity

R.C.C Pipe NP2 class 900 mm dia

R.C.C Collars NP2 Class 900 mm Dia

Carriage of R.C.C Pipe 900 mm dia

Brick Bats

PVC Gasket For Glass

P.V.C Pipe 20 mm dia 10 kg Pressure (class IV)

Mason (brick layer) 2nd class

Fine sand (zone IV)

Interlocking C.C. paver block(60 mm thick, M-30)

Joint cutting machine with 2-3 blades

Bhisti

Mason (brick layer) 1st class

Display Board/ CIB

Nails

MS Engle

Kamlakar Bhauji Asutkar (BID ID -7121615)

Dilip Dethe (BID ID -7121708)