SPECIAL REPAIR/ REPLACEMENT OF THE 11 KV POWER DISTRIBUTION NETWORK AT CP COLONY AND NEARBY AREAS UNDER GE (UTILITIES) UDHAMPUR

Taking out unserviceable PCC poles HT and LT any type and size complete all as specified and directed.

Taking out unserviceable Steel poles HT and LT any type and size complete all as specified and directed.

Taking out unserviceable stay assembly complete any type and size complete all as specified and directed.

Taking out unserviceable insulator any type and size complete all as specified and directed.

Taking out unserviceable Cross arms any type and size complete all as specified and directed.

Taking out unserviceable ACSR conductor HT and LT any type and size all as directed. Note : (i) Unsv materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unserviceable materials from the site to MES store deemed to be included in the quoted rates.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, and for laying of cable or pipes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25cm thick each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

M & L for providing earthing with GI earth plate electrode 600 X 600 X 6mm buried directly in ground (earth pit not less than 2.25M deep below ground level ) with top edge of the earth plate not less than 1.5M below ground level connected to GI strip 32 x 6mm thick for earthing lead fixed by means of nuts,bolt,washers etc connected to earth test point complete all as specified in electrical plate NO 3 of SSR 2009 part 1 ,including necessary excavation and earth work in any strata of soil,comman salt, charcoal dust, 40 mm dia light grade GI pipe up to 7.5 metre for protection to earth lead, GI water pipe 20mm dia with funnel &wire mesh , PCC pit with CI cover and frame etc all as specified and directed by Engineer-in-charge. Note:- All the joints shall be made with welding to get proper conductivity. Note:- The Contractor shall fix the Earth Pit Chamber Board of3.15 mm thick mild steel sheet of size min 45 cm X 30 cm fixed with 12 mm thick MS rod two nos up to 90 cm Height by nut/bolts including spray painting with two coats of synthetic Enamel Black Paint complete MS Sheet both side including writing letters min 6 cm height i.e. Earth Pit No. , Location, Earthing test value and date and other letters complete all as specified and directed by Engineer-in-Charge.