GE/C-78/2024-25 REPAIR TO FLOORING, JOINERY, PLUMBING AND OTHER MISC WORK AT PRATAP CHOWK, TAURAS ENCLAVE, DAPS-I AND OTHER ADJOINING AREAS OF AGE B/R-II UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

All as per item no 02 before but except bricks

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified.

Taking down cement plaster in concrete or brick wall surface of any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering in cement mortar 1:6 finished even and other than fair surface on wall complete all as specified and directed by Engineer-in-Charge.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and fair complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed finished even and fair including taking down old plaster complete all as specified.

M&L Preparation of newly plastered surface applying two coats of Cement based paint on walls complete all as specified.

M&L for preparation of newly plastered surface applying two coats of oil bound distemper with roller brush (white or tinted) on plastered wall surfaces complete all as specified.

M&L complete removal of existing treatment of old surface with two coat of oil bound distemper on walls / ceiling incl preparation of old plastered surface complete all as specified and directed

M&L resecuring or Easing and adjusing without taking down of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area exc. 1sqm but not exc. 2 sqm each,complete all as specified and directed.

M&L for 2nd class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified.

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, complete all as specified.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same opening complete all as specified.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging complete all as specified.

S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides. The size of rail & style as per IS :1003 (Part I), Kilan seasoned & chemicals pressure treated, complete all as specified.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube.

S&F mild steel work as in hold fast 25x3mm flat iron and similar articles conforming to Fe-410-0, complete all as specified.

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified.

S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed.

S&F in repair Prelaminated particle board 18/19 mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing continuous Piano hinges, bright finish stainless steel, width of flaps when open 30mm with suitable size steel screws complete all as specified and directed .

S&F 100 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified.

S&F 75 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.

S&F in repairs 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified.

S & F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified.

S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified.

S&F in repair 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified.

S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified.

S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified.

S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified.

S&F in repair Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified.

S&F in repairs 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed stainless steel wire staple, complete all as specified and directed.

S&F in repairs 4.00 mm thick plain sheet glass with wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, complete all as specified.

S&F 4.00 mm thick figured glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified.

S&F 5.5 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm each including grinding of edges for crockery cupboard including taking out/ broken glass with roller, complete all as specified.

S&F mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified.

S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified.

S&F in repair double aluminium channel size 10x20x2 mm, complete all as specified.

S&F MS roller with "C" shape staple, chromium plated for 5.5mm thick sheet glass complete all as specified.

S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed.

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified.

M&L for dismantling tiles laid dry or pointed of any size and thickness in walls and floors and complete removal of debris outside MOD land complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes of cement plaster 1:6 complete all as specified and directed.

M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured complete all as directed.

S & F for coloured Non - skid Ceramic tiles 6 to 7 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm ( size 400 mm x 400 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed.

All as per item No 58 above but to 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including screed/plaster on walls complete all as specified & directed.

M & L for 600x600x08 to 09mm thick coloured vitrified tiles(joint less) (make of tiles as approved by GE)as in floor over, including pointing in coloured cement to match the shade of tiles including cleaning with water and applying cement slurry @ 3 kg/sqm on prepared surface of floor and including cutting/adjusting of existing door shutter at required height after taking down and refixing complete all as specified directed.

All as per item No 60 above but to 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including screed/plaster on walls complete all as specified directed by Engr-in-Charge, and approved by GE all as directed.

M&L for coloured glazed ceramic tiles 300x600 x 6 to 7mm / 300x450 x 6 to 7mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 16-18mm thick black granite stone work (table rubbed and polished) laid over and including 15mm thick screed bed or bedding layer in CM 1:4 as in steps, Jambs, pillars, window clips, cooking platforms and like, inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, front and side of slab moulded and polished complete all as specified and directed. Granite stone slab shall be laid in single piece with rounding of edgesand a grove shall be provided beneath the projection portions of stone slab and provn of hole for gas pipe shall be provided.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified.

M&L for anodised aluminium door shutters, aluminium section weighing .55kg/Rmincluding necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F Powder Coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified. Note: The window shutters shall be double leaf and double shutter/double shutter and single leaf. The rates qouted by contractor deemed to be inclusive of entire completion of work like glass panes 4.00 mm thick and stainless steel wire coth 0.36mm nominal dia of wire average width of aperture 1.40mm complete. Net area to be measured for payment purpose.

S&F for steel windows / ventilators fabricated from roll formed sections made of galvanized steel colour coated powder coated (Base steel as per Sqm IS-513 D quality galvanized as IS 277 with zinc coating of 120 GSM with total coated thickness of 0.60mm. The coated section shall be with primer coated of primer of -7 microns thick, finish painted with a polyster paint of 12.16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure plyster powder upto 50-60microns thick with the following specifications (a) Main frame 72mm x 55mmx0.58mm (b) Mullion 72mmx50mm x0.58mm(c) Glazed/guazed shutter frame 47mmx20.20mmx0.58mm (d) Glass beads size 12mmx12mmx0.58mm Accessories. Each shutter shall be provided the following fittins (a) Stainless steel pipe of hinges 01 set (b) Steel handle-04 Nos. Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass. WIRE MESH -Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate. Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw. Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening.

Taking up or down 15 mm dia GI tubing and connections complete all as specified.

Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified.

S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, pipes should be painted with bituminous paint of approved quality complete all as specified and directed.

S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.

M&L for demolition of cement Concrete pavings exc 15 cm thickness (below or above ground level) for EWC & IWC removing out cinder/ concrete from sunken portion and and (a) M & L for sunken portion filled with Cinder or 40mm graded brick bats over finished with 50mm thick PCC 1:2:4 type B1 with water proofing compound including applying 2 layer of 85/25 Bitumen @ 1.20 Kg/Sqm each coat all as specified and directed (b) M & L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete Plus as specified .(c) M & L for providing 50 mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(d)Filling of sunken with brick bats as per requitrement.(e) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.all as specified and directed.Note : IWC/EWC Shall be measured and paid under relevant items seperately

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified.

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 915mm x 460mm x 200mm with bowl size 410mm x 330mm x 160 mm including taking out existing Complete including fixing of granite slab with and including providing suitable size groove for adjusting top level ,moulding of slab each side and polished all as specified.

S&F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to rain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete complete all as specified .

S&F in repairs vitreous chinaware wash hand basin with pedestal of size 580mm x 450mm complete including , CP Waste couppling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.

S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top ) composite type or lid should be thread type) hoisted and fixed in position with flot valve and tank connection nipple including dismantling of pvc tank complete all as specified.

S&F Rotational moulded polythylene 500 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top) hoisted and fixed in position with float valve, tank connection nipple including of dismantling pvc water tank complete all as specified.

Cleaning and removing all scales and dirt etc. of the tank by scrapping with hard plastic/nylon wire brush and washing it with bleaching powder solution and thereafter washing the same with clean water from service water tank and mouth of circulating pipe of capacity of tank upto 1000 litre complete all as specified and directed by Engr-in-Charge.

S&F in repairs chromium plated toilet paper holder, complete all as specified.

S&F in repairs chromium plated soap dish, complete all as specified.

S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI.

S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L band water screwed down for iron pipe and fixed complete all as spd.

S & F in repairs 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.

S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified .

M&L for only pasting the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints over a complete roof of the bldg complete all as specified.

M&L for applying two coat of silver Shield BITUMINIOUS paint on APP membrane complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick screed bed on top of roof concrete incl taking in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing incl taking down complete all as specified.

M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints complete incl dismantling of existing treatment all as specified.

M/L for providing concrete (1:3:6) type C1 (using 20mm graded stone aggregate) in roof kerbs or mudstops,rounded or chamfered in edges concrete complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as directed.

M& L for rubber moulded Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick with mixture of grey cement & pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in C M 1:6 complete all as specified and as directed.

M & L Cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified.

M & L Machine pressed precast concrete rubber moulded interlocking dark coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade all as specified and disposing to debries etc all as directed by Engr-in-Charge.

M&L sand filling under floors or in foundation including watering and consolidation

S&F stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 750mm x 750mm x 250mm including complete all as specificed and directed.

S&F 15mm bore dia of pipe bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed complete.

S&F 15mmbore dia of pipe brass CP mixer for wall for mixing hot & cold water screwed down for iron pipe and fixed.

S&F 15mm dia PVC waste pipe for WHB and kitchen sink complete.

Providing & Fixing type B0 1:2:4(12.5mm graded aggregate) set in cement mortar 1:4precast cement concrete louvres and jallies, 25mm thick (measured solid), inclding all mouldings complete all as specfied and directed.

M&L for door seal of min length of 75mm/required length complete all as specified and directed.

S & F in repair brass chromium plated towel ring including a pair of CP brass bracket coplete all as specified and directed.

S & F in repair Glass Corner Shelf 10mm thick including CP railing radius 300mm radius complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe 15 mm bore of pipe screwed for iron pipe fancy pipe all as specified and as directed.

S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed.

S&F in repairs CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complete all as specified.

Schedule of Credit

M/S Sunil Steel Works (BID ID -3197580)

POONAM ENTERPRISES (BID ID -3195755)

M/s SAAR ENGINEERS (BID ID -3197381)

imran construction company (BID ID -3197108)