CONVERSION OF OVERHEAD CABLE TO UNDER GROUND CABLE OF 76 INF BDE CAMP AND PROVN OF 11 NOS OF 11 METER POLE MAST LIGHT WITH LED FLOOD LIGHT ALONG THE PERIPHERY OF FASF KOMPALLY UNDER AGE EM I OF GE U SECUNDERABAD

Amount

Dismantling concrete poles/ struts, any size

Taking down the LED street light of any make any specification from existing PCC pole and refix the same in Steel tubular pole complete all as specified and as directed by Engr-in-charge.

Taking down of ACSR conductor of any specification complete all as specified and as directed

Supplying, laying, jointing, testing and commissioning 1100 volts grade, LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/road crossing or fixed on poles, walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including taking down unserviceable cable complete all as specified and directed. Note : Earthwork Excavation, sand cushioning GI pipe and cable protection will be measured and paid separately.

All as per item No. 4.00 above 4 core 10 Sqmm

All as per item No. 4.00 above 4 core 16 Sqmm

All as per item No. 4.00 above 4 core 25 Sqmm

All as per item No. 4.00 above 3.5 core 35 Sqmm

All as per item No. 4.00 above 3.5 core 50 Sqmm

All as per item No. 4.00 above 3.5 core 70 Sqmm

All as per item No. 4.00 above 3.5 core 95 Sqmm

All as per item No. 4.00 above 3.5 core 120 Sqmm

All as per item No. 4.00 above 3.5 core 150 Sqmm

All as per item No. 4.00 above 3.5 core 185 Sqmm

Supply and fix, Street light control junction box 230 x 170 x 105mm up to 25Sqmm 3.5/4 core cables made out of FRP sheet moulded and arrangement for incoming and outgoing 3 phase 4 wire system with R, Y, B & N studs and control for incoming and outgoing cables with MCB SP 10Amp 230 volts with neutral link including pole mounting kit, completed all as specified and directed. Make:Phoenix, Hensel, RITTAL, LEGRAND, HAGER

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor cable of size 3 core 4 sq mm served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq mm 3 core in service connections complete all as specified and directed.

M&L for pole painting by applying two coats of aluminium paint over a coat of red oxide primer with emulsion black paint complete all as specified and directed.

M&L, Stickering of any type of street light pole with A1 graded radium strip of 100mm width three colour red, Yellow and green around the pole with 100mm gap in each strip at a distance of 1.1 metre high from the ground level complete all as directed.

Supplying, erecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) complete all as specified and directed. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

S&F, street light bracket single arm suitable to fix on the top of steel tubular swaged poles type 410 SP-31 (9 meter long) without making hole on pole complete all as specified and directed.

S&F Galvanised iron tubing, light grade with all fittings fixed complete to walls, poles, ceiling or laid in floors/trenches/road crossing/beside steel tubular poles for the protection of cable for the following sizes all as specified and as directed.

(a) 40 mm bore

(b) 80 mm bore

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying cable at and getting out in soft/loose soil all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and exceeding 1.5 Mtr depth up to 3 Mtr for laying cable at and getting out in soft/loose soil all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in hard / dense soil complete all as specified and directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick all as specified and directed

Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 Mtr above from the starting point all as specified

M & L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate coping of poles including forming work complete all as specified

M & L for PCC 1:3:6 type B2 using 40mm graded stone aggregate in foundations of poles, filling and mass concrete complete all as specified.

Supply, installing, testing and commissioning, factory made and tested, CPRI type tested and approved LT panel board indoor type, weather, vermin proof, cubical type, platform mounted, suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary Aluminium bus bar arrangement with insulated bus bar 1200 Amps rating, 4 strips, the panel should be dust proof, IP 54 class protection and made out of 3.15mm thick CRCA mild steel sheet with 40x40x5mm angle iron frame with necessary earth work excavation, hinged doors, front and rear opening and locking arrangement and duly powder coated on the out side and inside, cable glands and lugs for incoming and out going cable etc, independent chamber to accommodate complete all as specified and directed including following accessories :-

Incoming: (a) Micro processer released MCCB 4 Pole, 415 V, capacity 315 Amps - 01 No

Outgoing: (a) MCCB 4 pole adjustable type, 250 Amp, 415 Volts 35 KA – 02 No (b) MCCB 4 pole adjustable type, 100 Amp, 415 Volts 35 KA – 03 No (c) MCB SP 6-32 Amp -01 No (d) Indicating lamps (set 03 Nos) - 01 set (R, Y & B) (e) Digital panel mounted Voltmeter and ammeter flush type of size 96 X 96 mm three phase (f) 3 Phase Astronomical based Street light timer with contactor of suitable capacity -01 No (h) Panel wiring with suitable size PVC insulated heavy duty 1100 volts grade single core cable with copper conductor multistranded with cable end termination lugs.

Supply, installing, testing and commissioning, factory made and tested, CPRI type tested and approved LT panel board outdoor type, weather, vermin proof, cubical type, platform mounted, suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated bus bar 600 Amps rating, 4 strips, the panel should be dust proof, IP 54 class protection and made out of 3.15mm thick CRCA mild steel sheet with 40x40x5mm angle iron frame with necessary earth work excavation, hinged doors, front and rear opening and locking arrangement and duly powder coated on the out side and inside, cable glands and lugs for incoming and out going cable etc, independent chamber to accommodate complete all as specified and directed including following accessories : -

Incoming: (a) MCCB 4 pole adjustable type, 160 Amp, 415 Volts 25KA - 01 No

Outgoing: (a) MCCB 4 pole adjustable type, 63 Amp, 415 Volts 16 KA - 2 No (b) MCCB 4 pole adjustable type, 40 Amp, 415 Volts 16 KA - 5 No (c) Indicating lamps (set 03 Nos) - 01 set (R, Y & B) (d) Digital panel mounted Voltmeter and ammeter flush type of size 96 X 96 mm three phase (e) Panel wiring with suitable size PVC insulated heavy duty 1100 volts grade single core cable with copper conductor multistranded with cable end termination lugs.

Supply, installing, testing and commissioning, factory made and tested, CPRI approved LT panel board outdoor type, weather, vermin proof, cubical type, platform mounted, suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated bus bar 400 Amps rating, 4 strips, the panel should be dust proof, IP 54 class protection and made out of 3.15mm thick CRCA mild steel sheet with 40x40x5mm angle iron frame with necessary earth work excavation, hinged doors, front and rear opening and locking arrangement and duly powder coated on the out side and inside, cable glands and lugs for incoming and out going cable etc, independent chamber to accommodate complete all as specified and directed including following accessories : -

Incoming: (a) MCCB 4 pole adjustable type, 250 Amp, 415 Volts 25KA - 01 No

Outgoing: (a) MCCB 4 pole adjustable type, 160 Amp, 415 Volts 16 KA - 2 No (b) MCCB 4 pole adjustable type, 125 Amp, 415 Volts 16 KA - 2 No (c) MCCB 4 pole adjustable type, 40 Amp, 415 Volts 16 KA - 5 No (d)Timer plus power contactor- 1 No (e) Indicating lamps (set 03 Nos) - 01 set (R, Y & B) (f) Digital panel mounted Voltmeter and ammeter flush type of size 96 X 96 mm three phase (g) Panel wiring with suitable size PVC insulated heavy duty 1100 volts grade single core cable with copper conductor multistranded with cable end termination lugs.

S&F Weather proof outdoor bus bar chamber, made out of 3 mm thick MS sheet duly powder quoted comprising 4 Nos aluminium strips each of 250 Amps, 60cm long duly insulated mounted on insulators including MCCB 250 Amp with 4 No’s mounting legs made out of 25mm x 25mm x 6mm angle iron grouted in PCC block of size 30cm x 30cm x 90cm (30cm depth below ground level and 60cm above ground level) in cement concrete 1:3:6, type C-2 (using 40mm grade crushed stone aggregate), and connections with suitable size of aluminium thimbles, nuts, bolts & washers including cable glands at entry and outlet points including excavation and earth work, returning filling and removal of surplus soils, including taking out old unserviceable bus bar chamber complete all as specified and directed.

Supply and fix in repair 90 watts LED street light fittings new generation energy saving environmental friendly, long life, versatile pressure die casting aluminium IP65 with 10KV nominal voltage surge protection, luminaire with high power LED as light source and suitable drives etc complete all as specified and directed. Make:Fortune Arrt J-series cat part no LST90J5/HAVELLS Cat No ENDURASUNDOWNSL90WLED765PASVBOTG or equivalent in Crompton/Wipro.

Supply fixing connecting and testing in repairs/ replacement decorative warm white/ cool white LED Bollard light with opal diffuser & aluminium reflector of 08 Watt including nut, bolts, washers, clamps etc complete all as specified and directed by Engr -in-charge. Make :Havells cat no-CONEBLS8WLED8PSYMTOPC or equivalent in Crompton/Fortune Arrt/Philips.

Supply and fixing LED Solar street light fitting 40 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor with battery backup of at least 02 days complete all as specified and as directed by Engineer in Charge. Make : Havells Cat No SOLAR A10 40W or equivalent in Fortune Arrt/Crompton/ Philips.

S&F in repairs, Aesthetically designed decorative hot dipped galvanised mild steel step 3M pole with grey powder finish, Compatible for post top range. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories Window cover is fitted with allen screws to the pole complete all as specified and as directed. Make : Havells cat no - DECO POLE 3M TOP Ø 76 MM or equivalent in Philips or Bajaj.

S&F 60 W LED warm white/cool white Circular LED post-top offering excellent uniform illumination and aesthetics in one go Made up of Pressure Die Cast aluminium body and opal PC cover., IP 66 and IK 07 rating complete all as specified and as directed. Make :- Havells cat no -RINKPT45WLED757PSYMTOPC or equivalent in Philips or Bajaj.

M&L Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 Mpa working pressure.

M&L for cutting of road /hard standing up to a size not exceeding 20cm in width and not exceeding 60cm in depth for laying of LT UG cable/ protection pipe line making good the disturbed portion so as to match existing finishing with PCC 1:2:4 type B1/cement mortar in CM(1:2)Complete all as specified and directed.

M & L earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth strip 32 x 6mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 40mm bore from earth electrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 Mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/ dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed. Note:- Item of earthing includes cost of 7.5m long galvanised iron earth strip of 32 x 6mm size and protection pipe of 40mm bore GI light grade.

M & L earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth wire 4mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 20mm bore from earth electrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe light grade 15mm bore pipe for watering perforated at bottom 1.75 Mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/ dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed. Note:- Item of earthing includes cost of 7.5m long galvanised iron earth wire of 4 mm size and protection pipe of 20mm bore GI light grade.

Supply and laying in trenches of 80 mm dia DWC HDPE pipe, Heavy Duty, conforming to IS 14930 Part 2, made of HDPE, with corrugated outer wall and smooth inner bore, suitable for passing 1.1 kV, 4C x 10 sqmm to 3.5C x 35 sqmm XLPE cable, including cost of couplers, jointing accessories, end caps, and laying as per site requirement Complete all as specified and directed by Engr-in-Charge direction. Make SFMC, Reliance, Supreme.

Supply and laying in trenches of 100 mm dia DWC HDPE pipe, Heavy Duty, conforming to IS 14930 Part 2, made of HDPE, with corrugated outer wall and smooth inner bore, suitable for passing 1.1 kV, 3.5C x 50 sqmm to 3.5C x 95 sqmm XLPE cable, including cost of couplers, jointing accessories, end caps, and laying as per site requirement Complement all as specified and directed by Engr-in-Charge direction. Make SFMC, Reliance, Supreme.

Spreading riddle earth after preparation of excavated earth in cable duct with cable cushioning of cable laid in trenches complete all as directed by Engineer-in-Charge. Note: Punned thickness 18 CM (6.25 CM below cable and 11.75 CM above the cable) will be measured for payment purpose. Quoted rate inclusive of all arrangement as mentioned.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size with size 250mm x 150mm x 40mm all as specified and directed by Engr-in-Charge.

Supply and Fix 11 Mtr mast hot galvanised octagonal pole, continuously tapered (bolt fixing type) in single section made out of 3mm thick sheet with 210 mm bottom dia & 90 mm top dia made up of 3mm thk. HT sheet alongwith base plate of size 320X320X16mm locking arrangement complete with minimum 1 Mtr long MS/GI street light bracket, Bakelite sheet, neutral link, along with hinged door opening for loop in and loop out cable termination suitable MCB or any other electrical accessory, 4Nos of M24X75 long 'J' type EN 8 grade foundation bolts along with common template including Erection of metallic pole in cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and embedding 32 mm dia G.I. pipe (medium class)in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required etc.. connections, interconnections, testing and commissioning. Make : Bajaj/Philips/CG/Surya. Note : 1) The Contractor shall submit the manufacturer recommended drawing showing details of foundation obtained through Engineer in Charge for the approval of GE before execution of work. 2) The Quoted rates shall be inclusive of Concrete foundation of size recommended by OEM

Supply & fix 200/210 watts LED flood light fittings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection, luminaire with high power LED as light source and suitable drivers and mounting arrangements deemed to be included in the coated rates etc complete all as specified and directed. Make : Phillips/Bajaj/Wipro/Crompton greaves

Supply and connect PVC insulated PVC Sheathed flat twin core cable with stranded aluminium conductor of size 2.5 sqmm including taking down existing unserviceable wire complete all as specified and directed by Engineer-in-charge

Shreshta Associates (BID ID -3476519)

L and S ENTERPRISES (BID ID -3473546)

Srinivash Engineers (BID ID -3471502)

Universal refrigeration and Engineering Company (BID ID -3476083)

SVG SUPPLIES (BID ID -3473753)

MS ENTERPRISES (BID ID -3473321)

M/s. A&T Enterprises (BID ID -3475774)

Srinivasa Consructions (BID ID -3476011)

M/S J J ENTERPRISES (BID ID -3476269)

sree venkateswara enterprises (BID ID -3475310)

M/S B.SHRAVAN KUMAR (BID ID -3476504)