Road Safety Work

Road Safety Work

RETRO REFLECTIVE INFORMATION BOARD WITH MICRO-PRISMATIC TYPE SHEETING TYPE-XI SIZE 600X 600MM WITH COMPLETE ERECTION WORK.

RETROREFLECTIVE INFORMATION BOARD WITHMICRO -PRISMATIC TYPE SHEETING TYPE-XISIZE 600X 900MM WITHPOST. WITH SQUAREPIPE WITH COMPLETE ERECTION WORK.

RETROREFLECTIVE INFORMATION BOARD WITHMICRO -PRISMATIC TYPE SHEETING TYPE-XISIZE 900X1200MM WITHPOST. WITH SQUAREPIPE WITH COMPLETE ERECTION WORK.

RETROREFLECTIVE INFORMATION BOARD WITHMICRO -PRISMATIC TYPE SHEETING TYPE-XISIZE 900X 1500MM WITHPOST. WITH SQUAREPIPE WITH COMPLETE ERECTION WORK.

RETROREFLECTIVE INFORMATION BOARD WITHMICRO -PRISMATIC TYPE SHEETING TYPE-XISIZE 1200X1800MM WITHPOST. WITH SQUAREPIPE WITH COMPLETE ERECTION WORK.

MICRO -PRISMATIC TYPE SHEETING TYPE- XI . OVERHEAD SIGN BOARD TYPE I, FOR BOTHSIDE MESSAGE BOARD , SPAN 10X 1.5 S.Q.MTRS. WITH COMPLETE ERECTION WORK.

MICRO -PRISMATIC TYPE SHEETING TYPE-XI ADDITIONAL OVERHEAD SIGN BOARD TYPE I,FOR EXTETION OF BOTH SIDE MESSAGEBOARD,(FOR SPAN 10X1.5 S.MTR. ) WITHCOMPLETE ERECTION WORK ON PER RUNNINGMTR.BASIS.

MICRO -PRISMATIC TYPE SHEETING TYPE-XI. CANTILEVER SING BOARD TYPE II( BOTH SIDE CANTILEVER MASSAGE) , SPAN 5X 1.5 SQ.MTR.WITHCOMPLETE ERECTION WORK.

RETROREFLECTIVE ROAD STUDS WITH SHANK-AS PER SPECIFICATION WITH LAYING/FIXING

RETROREFLECTIVE ROAD STUDS WITH SHANK-AS PER SPECIFICATION WITH LAYING/FIXING

FLEXIBAL MEDIAN MARKER-AS PER SPECIFICATION WITH LAYING/ FIXING

SOLAR POWERED ROAD STUDS/ PAYMENT MARKER WITH 3600 SMOOTHILLUMINATION -AS PER SPECIFICATION WITH LAYING/FIXING

RADIUM TAPE HIGH INTENSITY MICRO-PRISMATIC GRADE-AS PER SPECIFICATION

SQUARE BASE CONE-AS PER SPECIFICATION

MOB CONTROL HEAVY DUTY BARRIER

STOPER WITH WHEEL AND WITHOUT SOLARDELINATORS (LENGTH- 40.65 KG

STOPER (LENGTH 2500MM AND HEIGHT 900MM WIDTH 400MM AS PER SPECIFICATION APPROX. WEIGHT -45 KG.

ROAD MARKING WTH HOT APPLIED THERMOPLASTIC MATERIAL WITH REFLECTORIZING GLASS BEADS ONBITUMINOUS SURFACE. ( PROVIDING AND LAYING OF HOAT APPLIED THERMOPLASTICCOMPOUND SHALL BE 2.5 MM THICKINCLUDUNG REFLECTORIZING GLASS BEADS AT THE RATE OF 250 GMS PER SQM AREA. THICKNESS OF 2.5 MM IS EXCLUSIVE OF SURFACE APPLIED GLASS BEADS.

ROAD MARKING WTH HOT APPLIED THERMOPLASTIC MATERIAL WITH REFLECTORIZING GLASS BEADS ON RCC ORCEMENTED ROAD (WITH PRIMER APPLICAION OF CONCRETE PRIMER) ( PROVIDING ANDLAYING OF HOT APPLIDE THERMOPLASTIC COMPOUND SHALL BE 2.5 MM THICKINCLUDING REFLCTORIZING GLASS BEADS AT THE RATE OF 250 GMS PER SQM AREA . THICKNESS OF 2.5 MM IS EXCLUSIVE OF SURFACE APPLIED GLASS BEADS

RUMBLE STRIPS ( WITH FIXING): 1. MATERIAL: POLYURETHANE (PU) 2.DIMENSION: LENGTH: 500 MM, WIDTH: 100 MM , THICKNESS: 15 MM 3. COLOR: YELLOW AND BLACK COMBINATION 4. WEIGHT: NOT LESS THEN 470 GMS 5. 5 NO OF NAILS 4”USED FOR INSTALLATION ON ROAD

SOLAR LED TRAFFIC LIGHT BLINKER ONE NUMBER OF ORANGE TRAFFICE LIGHT WHISH IS BLIMKED EVERY SECOND MOUNTED ON A PLOE AND ABOVE SOLAR PANNEL AND SITUATED AT HR MAJOR JUNCTION AT MEDIAN AS WELL AS EDGE. SOLAR LED TRAFFIC BLINKER ONE NUMBER OF ORANGE TRAFFIC LIGHT WHISH IS BLIMKED EVERY SECOND MOUNTED ON A POLE AND ABOVE

RUMBLE STRIP (WITH FIXING) 1. MATERIAL: POLYURETHANE (PU) 2. DIMENSION: LENGTH: 500 MM , WIDTH :125 MM , THICKNESS:20 MM 3. COLOR: YELLOW AND BLCK COMBINATION 4. WEIGHT: MINIMUM OF 720GRAMS PER STRIP 5. INSTALLATION: REQUIRES 6 NAILS(4 INCHES) PER STRIP FOR ROAD INSTALLATION OF PLASTICS ENGINEERING& TECHNOLOGY (CIPET) 6.2 MATERAL IDENTIFFICITION: POLYURETHAN (PU) AS PER CIPET METHOD 6.3

PVC SPEED BREAKER SIZE (LxWxH)-250 mm X 350mm X 50mm

PVC SPEED BREAKER SIZE (LxWxH)-500mm X 400mm X 75mm