GE/BAS-63/2024-25 Repair/replacement of roof sheet, rolling shutter and false ceiling incl certain B/R works at Basoli under GE Basoli

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc 1.5 Sqm complete all as specified and directed.

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm PVC Ultra Violet chemical, glossymate finish 100% termite/water proof, fire retrandent eco friendly, PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F factory made solid panel PVC Mounlded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail: Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F in repair 18-20mm thick prelaminated PVC board having density 8 kg /sqm ,100% termite/ fire retrandent eco friendly soild board one side decorative choice laminate and other side balancing white as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc excluding Cupboard hinges , Aluminium handle , tower bolt, hasp and staple , piano hinges, Magnet and channel where required size as per dirn of Engr in Charge including taking down of old Cupboard of any type complete all as specified and directed

S&F in repair 5mm thick prelaminated PVC board having density 8 kg /sqm ,100% termite/ fire retrandent eco friendly soild board one side decorative choice laminate and other side balancing white for wall linning where required size as per dirn of Engr in Charge including taking down of old wall linning of any type complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S&F Mild steel Butt hinges medium weight cold rolled size 100mm. complete all as specified and directed by Engineer-in-Charge.

S&F aluminium handle , cast type, anodised ,150 mm size. complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F magenatic catcher for cupboard complete all as specified and directed.

S&F Stainless steel handle of size 150 mm long complete all as specified and directed.

S&F aluminium alloy , anodised ,sliding door bolt with hasp and size 250mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed.

S & F continiuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) in 30mm complete all as specified and directed by Engineer-in-Charge.

S&F for 100 mm stainless steel cupboard hardware hinge (donex hinge) for kitchen/cupboard ISI marked complete all as specified and dirceted.

S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for fly proofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, and two coats of synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 complete all as specified and directed.

S&F in repair 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed .

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

M&L Painting to old steel surfaces including prepration applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and directed

S&F in repair 15 mm CP long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

S&F steel water tubing galvenised, 20mm bore, medium grade with all fittings and fixed to walls, concealed including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

S&F in repair Vitreous china urinal Half stall type (white) o with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe complete all as specified and directed.

S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and directed.

S&F in repair urinal waste pipe complete all as specified and directed.

S&F in repair PTMT 32/40mm waste coupling of (half or full threaded) minimum weight 45gm complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified and directed.

S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed .

S&F in repair EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.

S&F in repairstainless steel grating with or without hole 100/125/150mm dia fixed with white cement complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

S&F 100/110mm dia PVC (SWR) P traps, including jointing to waste pipe with solvent cement complete all as specified and directed.

S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore of pipe all as specified & directed.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M & L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including preparation of new plastred surfaces then applying two coats cement base paint on walls over a coat ofprimer complete all as specified and directed.

M & L Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of new plastered surfaces and applying one coat primer & two coats of distemper oil emulsion over 3mm thick wall putty complete all as specified and directed.

M&L Preparation of old plastered surfaces and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L Preparation of old plastered surfaces and applying applying one coat of weather proof Apex paint complete all as specified and directed.

M&L Rendering 5mm thick in CM 1:3, on ceiling, etc. finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and Preparation of new pastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.

M&L for preparation of Old plastered surface and applying two coat of white wash on ceiling complete all as specified and directed.

M&L For Preparation of old/new white washed surfaces of wall (plastered or unplastered) for white washing and applying two coat of white wash complete all as specified and directed.

M&L preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint. complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed

M&L for Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed by Engr -in- Charge.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed by Engr -in- Charge.

Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etcwith welding work confirming to Fe-410-W (Gde-E-250) quality B two coat of synthetic enamel paint over a coat of red oxide primer including dismantling wrought iron or mild steel work of any descrfiption not otherwise provided complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded crushed stone aggregate) in plinth protection etc.laid in alternate bays complete all as specified and directed.

M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

M&L for applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.’

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed

All as per item above but, except bricks complete all as specified and directed

S & F position suspended false ceiling system using E - grid suspended ceiling grid system . The size of grid shall be 600x600 mm with GI frame work main runner 38X24 mm cross Tee 25X 24 mm and wall angle 24mmX24mm using 8mm thick ceiling panel laminated with PVC film on front face and foil back availalble in due drop textureas per IS -2095Part-I 1996 fixed in the grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and directed.

S & F hollow PVC 5mm thick Wall Lining any colour/texture sheet incl all fixing arrrengement as complete all as specified and directed.

Demolition of Wall boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.complete all as specified and directed.

S$F in repair of Steel rolling shutters of 1.25mm thick lathe ,without ball bearing, including top cover, anchoring rod, hasp and staple, spring, hood, clamp, guide rail and incl all other accesories whichsoever required to make the shutter functional and fixing in position as indicated, complete with gear operated type bevel gear box and crank handle incl taking down the existing shutter, complete all as specified and directed.( Note : Ball Bearing to be paid extra, )

S & F in repair Ball bearing for rolling shutters complete all as specified and directed

S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L For Glazed ceramic coloured tiles in vertical surfaces 450x300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in C.M 1: 4 complete all as specified and directed

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) Size of tile exc 0.18 Sqm but not exc 0.38Sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) Size of tile exc 0.11 Sqm but not exc 0.18Sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with grey cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed

Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed .

S & F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall .complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed

S & F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , laid in trenches or floor complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , laid in trenches or floor complete all as specified and directed

S & F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair complete all as specified and directed

S & Fin repair PVC (SWR) plain Bends in any radius 110 mm bore complete all as specified and directed

S & Fin repair PVC (SWR) plain Bends in any radius 75 mm bore complete all as specified and directed

S&F in repairs for 110mm dia bore PVC SWR branch piece single (Single Y) equal or unequal complete all as specified and directed

S&F in repairs for 75mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed

S&F in repairs for 75mm dia bore PVC SWR junction double (Double T) equal or unequal complete all as specified and directed

M/S YOGESHWAR ASSOCIATES GOVT CONTRACTOR (BID ID -3275841)

M/S SINGHAL ENGINEERS (BID ID -3276235)

G.M. ENGINEERING SERVICES (BID ID -3275483)

Ms International Engineers (BID ID -3276295)

ADVAIT CONSTRUCTION CO (BID ID -3275379)

M/s GIrdhari Lal Rakesh Kumar (BID ID -3276216)

MANOTRA BUILDER (BID ID -3276084)