E1-0602-2025

Amount

Supply and Delivery of 500 litre capacity doubledoor freezer in Model - 500B/A Storage capacity 500 Litre Voltage 230 Watts 380 (Vinus,Bluestar) including cost and conveyance of all materials to site and all labour charges etc.(As per local market rate)

Supply and delivery of 15 litres capacity tilting grinder equipment with following specifications: 1) Fully stainless steel body 2) Motor: 3 phase 1.5 HP motor 3) Stone used: Millstone (As per local market rate)

Supply and delivery of IDLY PLANT (DELUX) – CAP 240 Nos. IP – 240 Made of 304Gde 16 SWG SS sheet.This unit is divided with 04 chambers. This is mounted on SS stand . Racks will be provided underneath to keep idly plates. Idly boiled within 5 to 7 Mts. Heat resistance door with auto steam injection. Each idly tray having 20 iddlies. Total tray is 12 Nos.(As per local market rate)

Labour charges for replacement of gas burner, gas tube, regulator, and gas valve including all labour and conveyance charges etc complete as directed by departmental officers (As per local market rate)

Supply and delivery of Heavy metal eversilver and Aluminium vessels specified in the list including transportation and all other handling charges etc complete as per the reqruirement (As per local market rate)

VANA 18G WT HANDLE with 26" SIZE + S.S LID

VANA 18G WT HANDLE with 23" size

HOTPOT 40 TOLBOY RU EXW

COOKER 80 LITALU ANCOR

BUCKET 15 RR SS

BUCKET 12 RR SS

ANDA JUMBO 22G MUT SS with 19" SIZE + S.S LID

ANDA HALF 22G MUT SS with 18" SIZE + S.S LID

ANDA HALF 22G MUT SS with size 13 .1/2 + S.S LID

ANDA HALF 18G MUT SS with FLAT BOTTAM 19 SIZE SIDE HANDLE + S.S LID

COLLANDER 22 RR SS

DISCO DRUM 4 VS SS

KOPPARAI 5 INNER (VH)

DRUM 15-18 WELD MDC SS with 18 SIZE

DRUM 15-18 WELD MDC SS

TEA CAN 25 LT VH SS

KADAI 26 HVY XL UB ALUM

MUG REVIT 6 JM SS

MUG 3 HANDLE RME ALU of 6 SIZE

DOSA TIRUPI FORK KT IRN

KNIFE TUMKUR BIG KT WOOD

EVER SILVER PARTITION PLATE

EVER SILVER TUMBLER-300ML

Repairing of boiler including replacement of following spares and labour charges for erection and dismantling: 1) Inner drum plate 2) Steam inlet copper tube 3) Burners 4) Packing rope 5) Bolt nuts 6) Outer drum welding 7) Outer casing 8) Steam control valves 9) Outlet pipe line 10) Mild steel union 11) Cutting, welding lathe and conveyance charges (As per local market rate)

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Dismantling the existing damaged plain cement concrete Up to 3M height including clearing away from the site and all labour charges etc complete .

Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Supply and delivery of PVC Water tank of approved quality of departmental officers loading, unloading Cost and conveyance of all materials to Site etc., Complete.

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification .

Supply and delivery of 300mm dia RCC non pressure spun pipe ( NP3 ) with socket and spigot ends as per IS 458/2003 anufactured with sulphate resistant cement with 12 mm HI -alumina lining with rubber ring joints

Lowering 300mm dia RCC pipes and specials into the trenches and laying to proper grade and alignment and as directed by the departmental officers.

Labour Chareges for Jointing of 300 mm dia RCC Non Pressure Spun Pipe (NP3) with Socket & Spigot Ends with Rubber rings

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Plastering with cement mortar 1:5 (One cement and five sand) mix 12mm thick including cost of all materials and labour including curing charges complete as per standard specification

Supplying and fixing of 40mm thick fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and Design given by the departmental officers etc, complete as per standard specification

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level -Using Perforated Sheets 10mm thick of the following types with G.I. perimeter channel of size 0.55mm tk (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimetre of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws at 610mm centres. Then suspending G.I. Intermediate channel of size 45mm (0.90mm thick with two flanges of 15mm each) from the soffit at 1220mm centres with ceiling angle of 25mmx 10mmx0.50mm thick etc complete as per std specification.

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good for PVC Open light point / Fan point (For Electronic regulator) etc, complete as per standard specifications. SD 21

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wallwith 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting ofsuitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD-37)

Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for Open PVC power plug point.SD 41

Supply and fixing of 1400mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod including fan clamp with side plates and cross arm of size 450mm(SD-108)

Supply and fixing of 20W 4 Feet LED Fitting with approved quality including cost and conveyance of all materials to site and all labour charges etc complete.

Earthing as per PWD standard with an earthelectrode of 2metre Class'B' GI pipe of dia not less than32mm complete with necessary masonry work(SD-212)

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-659)

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(SD-445)

Supply and delivery of PVC Pipe and G.I Pipes Specials approuved quality of departmental officers loading, unloading Cost and conveyance of all materials to Site etc., Complete.

4" PVC pipe

4" PVC Elbow

4" PVC Tee

4" PVC Aircowl

1" PVC pipe

1" PVC Elbow

1" PVC Tee

1"X3/4" PVC Reducer elbow

PVC Screw Down Tap Heavy Type 20mm dia

Laying and Jointing the following PVC Pipes and GI pipes and Specials with proper gradient and test for all labour charges etc., Complete.

4" PVC pipe

1" PVC pipe

BALAGURU INFRA (BID ID -1376107)