Restoration work of Sunna Inspection House under Narora Division Lower Ganga Canal Aligarh

Amount

Dismantling brick work in cement mortar and including stacking of material with in a distance of 60M as per directioon of Engineer-in-charge.

Barbed wire fencing including fixing it post and strecking including cost all material T&P required for proper completion of the work.

Brick work in 1:4 (1 cement : 4 coarse sand) including cost of all material labour T&P etc. required for proper completion of the work.

Finishing of walls with water proofing cement paint of approved make such as Snocem, Durrocem, Guttucem,supreme quality of required shade on uncoated wall surface (one coat over one coat white cement primer to give even shade after throughly brushes the surface to remove all dirt and remain of loose powedered material including curing and cost of all materials.

Earth work in excavation in foundation in ordinary Soil including lift up to 1.5 meter and lead up to 30 M including lift upto 1.5 m and lead up to including back filling watering and rammaing of excaveted earth.

Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.5Kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work Including Vat. 80mm (Rubber moulded Gray)

Providing and laying vitrified floor tiles of 600mmx600mm size without lean concrete with water absorption less than .08% and conforming to IS:15622, of approved make,in all colours shades. Laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete.

Dismantling existing plaster including disposal of refuse with in distance of 60M(Internal).

Cement plaster in 1:4 (1 cement : 4 coarse sand) including cost of all material labour T& P required for proper completion of the work.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an including priming coat cement primer of approved brand and manufacture such as Berger,J&N, Shalimar,Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of materials.

Dismantling doors and window chaukhat with hold fast including stacking material with in 60M.

Dismantling doors and window leaves including stacking material with in 60M.

Indian Sal wood wrought framed and fixed including simple moulding, straight work as in chowkhats including supply of all materials, labour, tools & Plants etc required for proper completion of the work.

Providing and fixing of flush doors, commercial quality conforming of I.S 2202 part-(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks, handles,springs,fitting with necessary screws to be supplied departmentally (32mm thick)

Providing and fixing of 4cm thick C.P teak wood Part Panelled and part glazed window shutters including supply and fixing of wooden cleats and steps and filling.

Painting two coats over Prime coat on new wood surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of material, labour, Tools & Plant etc.as required for proper completion of work.

Painting two coats over Prime coat on New steel work surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of material, labour, Tools & Plants etc., as required for proper completion of work.

Centering and shuttering of R.C.C work including cost of shuttering.

Cement concrete with stone grit (1:1.5:3) 1 cement : 1.5 coarse sand : 3 stone grit 20 mm gauge) in R.C.C work including all cost of all material labour and T& P etc and excluding cost of centring and shuttering and renforcement.

Steel Reinforcement for RCC work including bending binding and placing of reinforcement for completion of the work

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc.

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in conduit concealed in the wall complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite

Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch and socket etc. complete in all respect including matching colour wash.

Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc.

Providing and fixing and concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.

Supplying & Fixing of 40 Amp. DP MCB (10 KA) C Curve CAT A

Providing and fixing of power plug with 20 Amp./250 volt flushtype modular switch and 5 pin 20 A/250 volt flush type universal modularsocket switch on concealed M.S box includingsupply of all material, labour T&P etc. required for proper completion of work.

Providing and fixing of electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and fixingof LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light complete including tube etc on surface complete in all respect. CAT-AAA

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes joints of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. (c) 25mm nominal outer dia pipes

Providing and fixing PVC pipe confirming to IS make working Pressure 6 Kg/Cm2 including testing labour T&P and all complete fittings. A) 90mm

Providing and fixing of UPVC S.W.R Nahni trap size 100/75 mm, 100/90mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125mm dia heavy duty CP brass jali

Providing and fixing Stainless Steel A ISI 304(18/8) Kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.(A) Kitchen Sink with drain board

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved qulity and colour(600mm long towel)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and with plastic moulded frame of approved make and shade with 6 mm thick hard board backing

Providing and fixing white vitreous china pedastal type water closet (European type WC pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe, with manually controlled device (hand lever), confirming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floorswherever required. (a) WC pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china wash basin size 630 x 450 mm with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern with 32mm dia semi rigid waste pipe, including painting of fittings and brackets, cutting and making good the walls wherever required

Providing and fixing 15mm CP brass bib cock of approved quality confirming to IS : 8931

Septic Tank

Earth Work in Foundation in dry ordinary soil ( Loam , Clay ,or Sand )including Lift up to 1.50 m. and Lead up to 30.00 m and including back filling , watering and Ramming of Exacavated earth in to the trenches or in to the space between the structure and the sides of foundation trenches or in to the plinth with removal and disposal of surplus earth as directed by Engineer-in Charge.up to a distance of 30.00 m from the foundation Trenches: ( Building )

Plain Cement Concrete with stone grit in 1:4:8 (1 cem : 4 coarse sand : 8 stone grit 40 mm guage) including cost of all material, labour, T&P etc. required for proper completion of the work.

Brick Work in 1:4 ( 1 Cement : 4 Coarse Sand ) Cement mortar including cost of all material, Labour, and T&P etc. Required for Proper completion of work.

Cement Plaster in 1:4 Mortar ( 1 cement : 4 Coarse Sand ) on Brick Massonary Work including Cost off all Material , Labour , and T&P etc. Required form proper completion of the work .

Cement Concrete flooring up to 40 mm thick in 1:2:4 (1 cem : 2 coarse sand : 4 stone grit 20 mm guage) including cost of all labor, material, T&P etc. required for proper completion of the work.

Centering and Shuttering FOR R.C.C Work including Cost of Centering and shuttering.

Cement Concrete with Stone grit in M20 - 1 : 1½ : 3 ( 1 cement : 1½ Coarse Sand : 3 Stone grit 20 mm. Gauge ) in R.C.C Work including cost of all material , Labour , and T&P etc. and exgluding cost of centering and shuttering and reinforcement.

Steel Reinforcement for R.C.C Work including Bending , Binding , and placing of reinforcement with cost of all material , Labour , T&P etc. Required for proper completion of work .

Soak Pit

Earth Work in Foundation in dry ordinary soil ( Loam , Clay ,or Sand ) including Lift up to 1.50 m. and Lead up to 30.00 m and including back filling , watering and Ramming of Exacavated earth in to the trenches or in to the space between the structure and the sides of foundation trenches or in to the plinth with removal and disposal of surplus earth as directed by Engineer-in Charge.up to a distance of 30.00 m from the foundation Trenches: ( Building )

Cement Concrete with brick ballast in 1:6:12 (1 cem : 6 coarse sand : 12 brick ballast 40 mm guage) including cost of all material, labour, T&P etc. required for proper completion of the work.

Brick Work in 1:4 ( 1 Cement : 4 Coarse Sand ) Cement mortar including cost of all material , Labour , and T&P etc. Required for Proper completion of work .

Centering and Shuttering FOR R.C.C Work including Cost of Centering and shuttering.

Cement Concrete with Stone grit in M 20 - 1 : 1½ : 3 ( 1 cement : 1½ Coarse Sand : 3 Stone grit 20 mm. Gauge ) in R.C.C Work including cost of all material, Labour, and T&P etc. and exgluding cost of centering and shuttering and reinforcement.

Steel Reinforcement for R.C.C Work including Bending , Binding , and placing of reinforcement with cost of all material, Labour, T&P etc. Required for proper completion of work .

Filling Brick Bats in Soak Pit including cost of all labour, material T&P etc required for proper completion of the work.

Staff quarters at sunna Inspection House

Earth work in excavation in foundation in ordinary Soil including lift up to 1.5 meter and lead up to 30 M including lift upto 1.5 m and lead up to including back filling watering and rammaing of excaveted earth.

Plain cement concrete with stone ballast in 1:4:8 (1 cement :4 coarse sand :8 stone ballast 20 to 40mm gauge) including cost of all material labour and T&P etc. required for proper completion of the work.

Brick work in 1:4 (1 cement : 4 coarse sand) including cost of all material labour T&P etc. required for proper completion of the work.

Providing and laying D.P.C 25 mm thick with Cement concrete Consisting of 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 approved 5.6 mm garded Stone grit) and including water proofing material as approved by the Engineer-In-Charge in the proportion as specified by manufacturer.

Centering and shuttering of R.C.C work including cost of shuttering.

Cement concrete with stone grit (1:1.5:3) 1 cement : 1.5 coarse sand : 3 stone grit 20 mm gauge) in R.C.C work including all cost of all material labour and T& P etc and excluding cost of centring and shuttering and renforcement.

Reinforcement Steel in beams,slab,column @ 1.0% concrete qty(9.205)M3

Indian Sal wood wrought framed and fixed including simple moulding, straight work as in chowkhats including supply of all materials, labour, tools & Plants etc required for proper completion of the work.

Providing and fixing of flush doors, commercial quality conforming of I.S 2202 part-(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks, handles,springs,fitting with necessary screws to be supplied departmentally (32mm thick)

Providing and fixing of 4cm thick C.P teak wood Part Panelled and part glazed window shutters including supply and fixing of wooden cleats and steps and filling.

Cement plaster in 1:4 (1 cement : 4 coarse sand) including cost of all material labour T& P required for proper completion of the work.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an including priming coat cement primer of approved brand and manufacture such as Berger,J&N, Shalimar,Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of materials.

Finishing of walls with water proofing cement paint of approved make such as Snocem, Durrocem, Guttucem,supreme quality of required shade on uncoated wall surface (one coat over one coat white cement primer to give even shade after throughly brushes the surface to remove all dirt and remain of loose powedered material including curing and cost of all materials.

Painting two coats over Prime coat on new wood surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of material, labour, Tools & Plant etc.as required for proper completion of work.

Painting two coats over Prime coat on New steel work surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of material, labour, Tools & Plants etc., as required for proper completion of work.

Cement concrete flooring up to 40mm thick in 1:2:4 ( 1 cement :2 coarse sand :4 stone grit 20mm gauge) including cost of all labour,material & T&P etc.

Earth work in embankment by power transported earth with a lead beyond 200m and upto 1.00 including excavation, loading, unloading, manual compaction, dressing and all lifts complete.

Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.5Kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work Including Vat. 80mm (Rubber moulded Gray)

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc.

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in conduit concealed in the wall complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite.

Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch and socket etc. complete in all respect including matching colour wash.

Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc.

Providing and fixing and concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge

Supplying & Fixing of 40 Amp. DP MCB (10 KA) C Curve CAT A

Providing and fixing of power plug with 20 Amp./250 volt flushtype modular switch and 5 pin 20 A/250 volt flush type universal modularsocket switch on concealed M.S box includingsupply of all material, labour T&P etc. required for proper completion of work.

Providing and fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and fixingof LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light complete including tube etc on surface complete in all respect. CAT-AAA

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes joints of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. (c) 25mm nominal outer dia pipes

Providing and fixing PVC pipe confirming to IS make working Pressure 6 Kg/Cm2 including testing labour T&P and all complete fittings. A) 90mm

Providing and fixing PVC pipe confirming to IS make working Pressure 6 Kg/Cm2 including testing labour T&P and all complete fittings. B) 110mm

Providing & Fixing of UPVC S.W.R. Nahni trap size 100/75 mm, 100/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and Supply & Fixing of 125 mm dia heavy duty CP brass jali.

Providing & Fixing of PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealead fitting arrangement of approved quality and colour (600 mm long towel).

Providing & fixing mirror of superior glass (of approved quality) and of required shape and with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Providing & fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cost iron P or S trap, 10 litre low level white P.V.C flushing cistren, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous China Orissa pattern W.C pan of size 580x440 mm with intogral type foot rests

Providing and fixing white vitreous china wash basin size 630 x 450 mm with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern with 32mm dia semi rigid waste pipe, including painting of fittings and brackets, cutting and making good the walls wherever requaired.

Providing and fixing 15mm CP brass bib cock of approved quality confirming to IS : 8931

M/S S R CONSTRUCTION