Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC 131 SANGAM NAGAR OPP NATIONAL SCHOOL SANGHVI PUNE 411027 | PUNE | MAHARASHTRA | 411027 | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹28.4 L+₹2.2 L (8.30%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹28.6 L+₹2.4 L (9.26%)Rejected-Finance 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹28.9 L+₹2.7 L (10.2%)Rejected-Finance 1 NEAR AKBARIYA MASJID WIMBERLYGUNJ SOUTH ANDAMAN ANDAMAN NICOBAR 744206 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744206 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹34.9 L+₹8.8 L (33.4%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
REPAIRS MAINTENANCE OF EXHAUST AND VENTILATION SYSTEM AND CONNECTED WORKS SUCH AS DUCT FILTER MOTOR STARTER WITH CONTROL UNDER AGE EM II IN GE CENTRAL KIRKEE.
2022_MES_528835_1
8647/E8 OF 2022-2023
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
KIRKEE
Class D Category b(i)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹98,000
Yes
11 Aug 2022
7 Jun 2022
21 Jul 2022
7 Jun 2022
19 Jul 2022
21 Jun 2022
7 Jun 2022 - 20 Jun 2022
Amount
Repairs/ maintenance and servicing of electrically operated exhausters, fresh air blower, air curtains and centrifugal fans by dismantling motor, blowers / exhausters, impeller blades, cleaning the blower chambers by scrubing it with wire brush, removing dust, black smoke etc., again cleaning the blower chamber with CTC solvent and refixing the blower, motor, balancing the shaft and impeller complete of following capacities :-. (a) Capacity upto 2000M3/hr
(b) Capacity above 2000M3/hr to 5000 M3/hr
(c) Capacity above 5000M3/hr to 10,000 M3/hr
(d) Capacity above 10,000 M3/hr to 20,000 M3/hr
(e) Capacity above 20,000 M3/hr to 40,000 M3/hr
(f) Capacity above 40,000 M3/hr to 60,000 M3/hr
(g) Capacity above 60,000 M3/hr to 1,00,000 M3/hr
(h) Capacity above1,00,000 M3/hr to 1,50,000 M3/hr
(j) Centrifugal fan of capacity 4725cfm
(k) Centrifugal fan of capacity 3700cfm NOTE FOR SL ITEM NO 1 TO 10:- (i) The rate quoted by the contractor include cost of grease, cotton waste, lugs, nut-bolts & washers etc. (ii) Cleaning of blowers and plant room is deemed to be included in the quoted rate.
Matertial and labour for double knitted polymer fabric HDPE fresh air filter of washable / cleanable type, filter of size 610x610x150mm, having efficiency 95% to 99%, down to particle size of 5 to 20 micron, fabricated out of CRCA sheet metal duly painted with two coats of grey hammer tone, spray painted over two coats of red oxide primer, with lifting handle, box / flanged type, aluminium spacer etc, including taking down old filter all as specified and as directed.
All as per Sl Item No. 11 above but of size 630 x 500 x 50mm.
All as per Sl Item No. 11 above but of size 610 x 610 x 50mm.
All as per Sl Item No. 11 above but of size 630 x 400 x 50mm.
All as per Sl Item No. 11 above of size 610 x 610 x 200mm.
Supply and fix filter "HEPA' with fibre glass paper filtering media of capacity 1000 CFM efficiency 99.97% down to particle size of 0.3 micron aluminium frames, box type of size 610 x 610 x 300mm including taking down old filter all as specified and as directed. NOTE:- Cleaning of duct and minor fabrication of duct to be done all as specified by Engr-in-charge.
Material and labour for washing the unserviceable filter of any size for reuse after cleaning with wire brush of high pressure water jet complete all as specified and as directed.
Material and labour for mild steel brackets, frames, supports and stands of type as required made out of angle iron, flat or strip of grade Fe-410-S of any size as per site requirement etc complete with painting two coats with synthetic enemel paint over a coat of red oxide primer all as specified and as directed.
Supply and fix water proof canvas cloth thickness not less than 01mm, cut into required shape and stiched all ends as per required size at site and fixed to exhausters / blowers by means of MS strip / FI clamps, nut, bolts and wahers etc including dismantling the existing unserviceable canvas cloth complete all as directed by Engr-in-charge. NOTE :- Measurement of finished canvas sheet shall only considered for payment. MS strip/FI clamp, nut bolts etc shall be deemed to be included in the quoted rate.
Supply and fix grooved pulley made out of cast iron, machine finished suitable for 'V' belt and fixing to shaft of motor or blower by using new shaft key to match with the existing including dismantling / removing the existing un serviceable pully all as directed by Engr-in-charge following types:- (a) PCD - 118. 2 grooves, Section 'A'
(b) PCD - 200, 2 grooves, Section 'A'
(c) PCD - 140, 3 grooves, Section 'B'
(d) PCD - 200, 3 grooves, Section 'B'
(e) PCD - 140, 4 grooves, Section 'B'
(f) PCD - 200, 4 grooves, Section 'B'
Supply and fix 'V' belt including removing the existing complete all as directed by Engr-in-charge of following sizes :- (a) A - 68
Supply and fix following ball/roller/tappered bearing suitable for electric motor and blower/exhauster including removing of existing unserviceable bearing of any type or make all as directed by Engr-in-charge. (a) No - 6204 zz
(b) No - 6205 zz
(c) No - 6307 zz
(d) No - 6308 zz
(e) No - 6309 zz
(f) No - 6310 zz
(g) No - 6312 zz
(h) No - 6313 zz
Disconnecting the electric supply from electric motor, 3 phase, opening the nut and bolts from its foundation, removing the burnt electric motor from its foundation, transporting to workshop for repair / rewinding, dismantling the motor carefully, taking out rotor assembly, removing the burnt winding from stator, cleaning the stator slots complete using CTC solvent, rewinding the stator with 'H' class super enameled copper wire of same gauge, varnishing, heating/drying complete, balancing rotor assembly if required, assemble the motor complete, transporting back to site, making all connections and testing complete all as directed by Engr-in-charge for following capacities :- (a) Upto 01 HP electric induction motor.
(b) Above 01 HP up to 02 HP electric induction motor
(c) Above 02 HP up to 05 HP electric induction motor
(d) Above 05 HP up to 10 HP electric induction motor
(e) Capacity 15 HP electric induction motor.
(f) Capacity 30 HP electric induction motor.
(g) Capacity 75 HP electric induction motor
Supply and fix bimetal over load relays with single phasing protection, relay range 9-15 Amps including removing of old un-serviceable overload relay all as directed by Engr-in-charge.
All as per Sl Item No. 53 above but relay range 14-23Amps.
All as per Sl Item No. 53 above but relay range 20-33Amps.
Supply and fix power contactor AC-3, rating 18 Amps, 415v including removing of old unserviceable power contactor all as directed by Engr-in-charge.
All as per Sl Item No. 56 above but 22 Amps.
All as per Sl Item No. 56 above but 32 Amps.
All as per Sl Item No. 56 above but 40 Amps.
All as per Sl Item No. 56 above but 70 Amps.
Supply and fix MCCB, TP, 400 Amps, 35 KA, ICS=ICU, 415 volts, 50 Hz including removing of old un-serviceable MCCB all as directed by Engr-in-chage.
All as per Sl Item No. 61 above but 250 amps, 35KA
All as per Sl Item No. 61 above but 125 amps, 25 KA
All as per Sl Item No. 61 above but 100 Amps, 25KA
All as per Sl Item No. 61 above but 63 Amps, 25KA
Material and labour for servicing / cleaning of air compressor of model KES -75-10.5 of make Kirloskar of capacity 10.5kg/cum by dismantling top cover, fan with fan motor and cleaning the air filter assembly, oil filter assemby, greasing the motor, cleaning the total structure of compressor and control panel with air wash changing the compressor oil complete and refixing the fan, frill & top cover testing and commissioning complete all as directed by Engr-in-charge NOTE :- (i) The sevicing is to be done by the company manufacturer / OEM . (ii) The compressor oil to be changed will be measured under relevant items.
Supply and fix pre air filter of capacity 500cfm for air compressor of capacity 12cum/min type KPF 600 all as specified and directed. Make - Kirloskar
Supply and fix Oil filter assembly for Air compressor with cat part no 274.01.459.50 all as specified and as directed. Make - Kirloskar
Supply and fix Air filter assemby for air compressor with cat part no 270.00.551.50 all as specified and as directed. Make - Kirloskar
Material and labour for compressor oil suitable for air compressor of type KES - 75-10.5 and taking out old compressor oil, cleaning the oil filter all as directed by Engr-in-charge.
Supply, installation of magnetic float operated guided fuel level indicators for over head diesel tank at a height of 20 mtr from ground level including magnetic float, controlling cable & display panel board including any addition / alteration required to existing structure complete suitable for MS over head diesel tank including dismantling old one complete all as directed . Make : Pune Techtrol or equivalent
Cleaning of damper chambers of exhaust pipe of various beds of engine test house including removing of all carbon particles, smoke, dust, etc., cleaning of all side walls, supporting beams, pipe supports, brackets complete including removal of existing paint and painting with two coats of synthetic enamel paint over a coat of red oxide primer using spray gun all as specified and as directed.
Taking down carefully worn out asbestos rope of exhaust pipe at any height complete all as specified and as directed by Engr-in-Charge
Supply and fix asbestos rope of size 19mm dia spiral winding (turn by turn) to engine exhaust pipe at any height, without keeping any gap, duly applying anticorrosive adhesive solution on pipe to avoid heat dissipation suitable for 1200oC working temperature complete all as specified and as directed.
Supply, fabricate and errect air duct made out of MS sheet with necessary suport, jointing with MS angle/flat iron/MS strip etc, cut in to shape, drilled and counter shunk for screw including bending, welding, riveting and painting with two coats of existing paint etc, complete and rubber packing of suitable size fixed with necessary nut, bolts and washers etc. including taking down MS sheet complete all as directed by Engr-in-charge. NOTE:- (i) MS angel iron, flat iron etc shall be measured and paid separately (ii) Neccessary welding and fabrication work to be done at actual site at approx 15 m height as per site. Contracor should visit site before quoting the rates.
Supply, fabricate and errect PGI air duct made out of 22 gauge PGI sheet with necessary support, jointing with MS angle / flat iron / MS strip etc, cut in to shape, drilled and counter shunk for screw including bending, welding, riveting and painting with two coats of existing paint etc, complete and rubber packing of suitable size fixed with necessary nut bolts and washers etc. including taking down old PGI sheet complete all as directed by Engr-in-charge. NOTE:- (i) MS angel iron, flat iron etc shall be measured and paid separately (ii) Neccessary welding and fabrication work to be done at actual site at approx 15 m height as per site. Contracor should visit site before quoting the rates.
Cleaning and painting of GI/MS pipes of air distribution of size 100/80/60/25 mm dia along with side supports complete with two coats of synthetic enamel paint as per existing colour code all as directed by Engr-in-Charge. NOTE :- Painting of pipe shall be caried out at hight of up to 10 mtr on wall or air.
Cleaning and painting of PGI of any size ducting along with side supports complete with two coats of synthetic enamel paint as per existing colour code all as directed by Engr-in-Charge. NOTE :- Painting of pipe shall be caried out at hight of up to 15 mtr on wall or air.
Cleaning and painting of PGI of any size ducting along with side supports complete with two coats of anti corrosive paint as per existing colour code all as directed by Engr-in-Charge. NOTE :- Painting of pipe shall be caried out at hight of up to 20 mtr on wall or air.
E M CONSTROL SYSTEM
metro electrical services
SBS Enterprises
T.H.ASSOCIATES
PAMS ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .