Development of Gallery at Patharughat Memorial Museum, Darrang

Site preparation

Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2

Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm

Finishes

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws, lock etc. complete as per direction of Engineer-in charge.

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Miscellaneous

Supply and installation of glass casing of 6 mm thickness clear toughened glass complete with glass adhesive , cutting finishing , fixing, screws, lock, hinges etc.

Supply and installation of glass casing of 6 mm thickness clear toughened CURVED glass complete with glass adhesive , cutting finishing , fixing, screws, lock, hinges etc.

Supply of stainless steel foldable wheelchair of approved make

Supply and installation of bendable solid surface of approved make and shade on showcases complete with necessary industry grade adhesive with matching colour grouting for seamless joints

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessaryscrews etc. complete. 50 mm

Supply and installation of stainless steel glass hinge of approved design

Electrical Work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non-residential buildings). Supply and installation of 18" dia exhaust fan of havells or equivalent make

Supply and installation of 18" dia exhaust fan of havells or equivalent make

Supply , installation testing and commissioning of pole mounted 3 watt LED cabinet spot light of approved design from Wipro, Jaquar, Panasonic , Changi or equivalent make complete with necessary driver etc.

Supply, installation testing and commissioning of ceiling mounted 6 watt surface mounted LED spot light with adjustable beam angle of approved design from Wipro, Jaquar, Panasonic, Changi or equivalent make.

Supply, installation testing and commissioning of ceiling mounted 9 watt LED track light of Wipro, Jaquar, Panasonic, Changi or equivalent make.

Supply, installation testing and commissioning of ceiling mounted metal track for track lights of Wipro,Changi, Panasonic, Havels or equivalent make.

Supply and installation of end connector for tracks

Supply and installation of corner connector for tracks

Supply and installation of UPS

Fire safety

Supply and installation of stand-alone smoke detector of Honeywell or equivalent make

Supply and installation of 4.5 kg CO2 based fire extinguisher of Agni, Ceasefire, Firex or equivalent make

Supply of Fire Balls of Agni , AFO or equivalent make

Supply of Emergency exit sign with battery backup

Audio Visual Hardware

4K Display : 55'' 4K LED Display, Resolution 3840 x 2160p (4K), make Samsung/LG/Sony or equivalent complete with necessary mounting arrangement

32'' 4K LED Display, Resolution 3840 x 2160 make Panasonic/Samsung/LG/Sony or equivalent complete with necessary mounting arrangement

Supply of 32GB pen drive of SanDisk, Kingstone, HP or equivalent make

Supply of 10W speaker bar of approved make

Audio Visual Content Development

Content Development for AV units including Video Documentation Editing & Publishing complete with Site visits

Preparation of Voice recording and production of Raij Mel Scene as directed by project curator

Art Work

Development and installation of theme based fibre casted high relief artwork as per approved content complete with preparation of components, transportation, installation and finishing etc. which shall include making of replica in terracotta and fibre casting (Tribal Durga - 30 cm x 20 cm; Narayani Mudra and Ahom Coin - 18 inch), Heritage bricks- 3000 pieces, Wall plastering with mud and cow dung paste

Providing and framing of thematic canvas painting of approved composition

Providing and installation of life size (approx. 3' x 12') wooden boat themed seating as per curatorial theme

Preparation and installation of thematic bamboo house facade with mud and cow dung plaster finishing with woven bamboo door/ windows etc., earthen plinth and straw roof overhang as required.

Supply and installation of wooden Plough with engraving of names of Martyrs

Printing and Installation

Supply, pasting and installation of Vinyl print of the approved content pasted on sun board as directed

Supply and installation of canvas print of size as required framed on 1" Stainless Steel frame

Supply and installation of satin print of size as required framed on 1" Stainless Steel frame

Supply and installation of Stainless Steel Stand, Archival paper, Acrylic Stands etc. as directed.

Supply and installation of non-reflective glass , polycarbonate back support, mount and fibre frame with framing of size 18" x 22" for archival documents and other important documents as approved

Supply and Installation of acrylic gallery signages of approved design

Supply and installation of rotary dial telephone with recording complete with system integration

Conservation Materials

Supply of powder free nitrile gloved of approved make (100 per pack)

Supply of 3 ply masks of approved quality (100 per pack)

Supply of Tyvek of 100 m long 43" wide roll

Supply of HDHMR board of 12 mm thickness

Supply of HDHMR board of 19 mm thickness

Supply of stapler gun and pins of approved make and quality

Supply of stapler pins of approved make and quality

Supply of Stainless steel scissors

Supply of stainless steel cutters

Supply of Silica Gel Beads

Supply of Glass bowl

Supply of nylon Foot mat

Supply of cleaning sponge and cleaning brush , 3" , 4" (pack of 1 x 2", 2 x 3", 2x 4" brush )

Supply of poly fill

Supply of distilled water