SPECIAL REPAIR TO BUILDING NO. P-118 (TRG SHED) AT WING IV, PROVN OF GUARD ROOM NEAR KV AND GENERATOR SHED FOR 62.5 KVA DG SET NEAR BLDG NO P-119 A ARTY RECORDS UNDER GE NASIK ROAD CAMP.

Amount

Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed

Demolition of Reinforced cement concrete Concrete of any description and in any position not otherwise specifically provided for.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed

Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

Surface excavation n.exc 30cm deep and averaing 15 cm deep and getting in out in soft/loose soil

Excavating in trenches,n exc 1.5 m wide and n exc 1.5m in depth for foundation etc in any type of soils

Excavation in post holes (or similar holes) each not exc 0.5m getting out, returning, filling in and ramming earth or broken rubble mixedwith earth around, in layers not exc 25cm,watering and removing surplus soil to a distance nexc 50 m and making good surfaces in soft/loose soil

Removing excavated material n exc 50m & depositing where directed at a level n exc 1.5m above the staring point as in soils

Removing of excavated soil exceeding 250 M and not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point all as directed by Engineer-in-charge.

Returning filling in, including spreading, leveling , watering & well ramming in layer n exc 25 cm as in soft/loose soils

M&L for moorum filling under floors or paving laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Hard core of gauge n.exc 63mm deposited spread levelled in layers n.exc 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate)as in foundations,filling and mass concrete

M&L for 75mm thick PCC 1:3:6 type C2 ( using 40mm graded stone aggregates) as in plinth protection finished even and fair without using extra cement all as specified.

M&L for PCC 1:2:4 type B1 (20mm graded stone aggregate) as in surface channels

M&L for damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4, Type B0 25mm thick complete all as specified and directed by Engr in Charge.

M&L for formwork to sides of soffits of floor or roof beams,cantilevers,lintels & chajja etc for flat rough finished surfaces of concrete

M&L for formwork to sides of pillars,columns for flat rough finished surfaces of concrete square,rectangular or polygonal

M&L for cement concrete type D-2 1:4:8 (40 mm graded aggregate) 75mm th in sub base

M&L for cement concrete type B-1, 1:2:4(20 mm graded aggregate) 25 mm thick as in floors

M&L for reinforced cement concrete Type B0 1:2:4 (12.5mm graded aggregate) of M-15(Nominal Mix) 20 mm graded aggregate as in as but as in beams and lintel beams

All as per Item No. 23.00 above but as in slabs supported on walls, cantilever or in shelves

M&L for Cement Concrete Type B0 1:2:4 Type B1 1:2:4 (12.5mm graded (20 mm graded aggregate)Walls, retaining walls, basement walls, ballast walls and the like; any thickness; any position, above top of footings; including attached pilaster and buttresses complete all as specified and directed.

M&L for 75mm thick cement concrete type E-2, 1:5:10 (40mm graded aggregate) in sub base to floor.

M&L for cement concrete 1:2:4 type B-2 as in foundation filling and mass concrete as in post

M&L for cement concrete 1:2 :4 (20mm graded stone aggregate) type B-1 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for cement concrete 1:3:6 Type C1(20 mm graded aggregate) as in plinth protection finished smooth and even without using extra cement and providing bitumen filled joints as directed complete

M&L for Mild steel TMT bars of 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto as Item no.30 but 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required.

Supply only intergral water proofing compound

M&L for brick work with fly ash' bricks straight or curved work on plan with mean radius n.exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks.

S & F mild Steel work in tubular trusses including special shaped, including nuts, bolts, washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F rolled mild steel plain angle cleats and plate for securing purlins to ragfter and similar small articals confirming to Fe-410-0 or Fe -310-0 complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straught flashing.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

S&F Sheet glass ordinary quality 5.5 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 but n exc 4.0 Sqm each. Complete including removing from site by each contractor at his own expense all as specified & directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each & removing from site

M&L for rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces as a backing coats for fixing tiles.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing even and smooth with out using extra cement.

M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth with out using extra cement.

M&L for rendering 5 mm thick over 10mm in CM 1:4 on the external surfaces of brick work/Strone or concrete surface finishing fair and even without using extra cement including mixing of integral WPC (WPC will be measured and paid separately.)

M&L for rendering 15mm with cement mortar 1:4 with sponge finish on brick/stone surfaces in two coat i.e. 5mm over 10mm

Cutting existing steel tubing for alternation or addition of 25mm dia GI tubing in position without taking down

Screwing existing steel tubing for or addition of 25mm dia GI tubing in position without taking down

Taking up or down 15 mm dia tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

All as per item No. 52 but 20 mm dia

All as per item No. 52 but 25 mm dia

S&F for 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

All as per item No. 55 but 20 mm dia

S&F in for 20 mm dia tubes medium grade, galvanized with iron all fittings fixed laid in treanches of sizes complete all as specified and directed.

All as per item No. 57 but 25 mm dia

M&L for reinforced concrete pipes class NP-2 and of dia 150mm laid and jointed complete with collars

Extra for forming fair finished drain or channel 30cm inner girth using extra cement incl forms, moulds, mitred/stopped ends etc.

M&L for Providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chulla hoods, chajjas shelves and similar articles and set in CM 1:4 etc complete all as directed

S&F waste fittings, brass, chromium plated of 32 mm dia for wash basins

S&F in repairs of pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts

S&F in repairs Vitreous china squatting pan with PVC(SWR) 'P' trap of 125/110 mm bore,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F PVC(SWR) bends of 110 mm bore

S&F PVC(SWR) junction single,(Single T) equal or unequal 110 mm bore

S&F PVC(SWR) vent cowl of 110 mm bore

S&F PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

S&F in repair 15mm bore bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair.

S&F in repairs vitreous china wash basin Flat Back 550x400mm incl cutting for and pinning in ends of brackets or errecting stand and flush pipe of 32 mm dia polythelene of low or high density or PVC completed all as specified and directed..

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs inclluding flush pipe of polyethelene of low or high dencity or PVC, 32 mm dia all as specified and direcetd.

Drilling and tapping of exsisting CI water mains in position for branch connection of internal dia 25mm

M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6.

M&L for glazed coloured ceramic tiles 450 x 300 x 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with white or coloured cement to match

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for coloured glazed ceramic tiles 450 x 300 x 7-8mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match

M&L for vitrified tiles 8 to 10mm thick and size exc 0.18 sqm but n. exc 0.36sqm each tile over 15mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the tile complete all as specified and directed by Engr in Charge. Note: screed bed layer shall be measured and paid seperately

All as per item No. 79.00 above but in skirting, steps, etc in vertical surfaces.

S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement building board 4mm thick "in ceiling fixed with screw as per manufacturer instruction”

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

M&L for two coat of colour wash over one coat of white wash on new plastered surfaces including necessary preparation

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

M&L for preparation of newly plastered surfaces of any description of walls applying three coats of whitewash on undecorated surfaces of walls complete all as specified and directed.

M&L for complete removal of existing wall surfaces including preparation (i.e. brooming down on plastered / unplastered surfaces complete) and applying two coat of Acrylic weather proof exterior paint over water based primer complete all as specified and directed.

M&L for preparing plastered surfaces and applying two coats of oil bound distemper over one coat of primer including preparatory work with including and applying wall care putty to distempering on surfaces of walls.

M&L for preparation of newly plastered wall surfaces and applying two coats of Acrylic weather proof exterior paint including and over one coat of white cement as primer complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing in SSR 2010 Part II

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing in SSR 2010 Part II.

S&F cold rolled stainless steel butt hinges 75 mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F Aluminium anodised powder coated door shutters aluminium section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading, screws etc complete all as specifed and directed

S&F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed

S&F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples in repairs

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F II nd class hard wood plain,solid,straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

S&F factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels ) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to chowkat. The size of rail and stile as per IS: 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F SS butt hinges 100mm size medium weight complete all as specified and directed

S&F MS barrel tower bolts stove enameled black with bright bolt – 150mm long fixed complete all as specified and directed.

S&F MS pressed handles oval type stove enameled black fixed – 150mm size complete all as specified and directed.

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and incl. a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate – 300 mm long complete all as specified and directed.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 31,404.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Alpha Construction

SIDDHIVINAYAK ENTERPRISES

SVT ENGINEERS AND CONTRACTOR.

Bidder Name

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

Alpha Construction

SIDDHIVINAYAK ENTERPRISES