Signalling work in connection with BCM work with Geogrid and Geo-Textile method (TFTR & TBR) in Solapur Division of Central Railway.

Item Breakup - 01-SOR SUPPLY

Supply of Tik-tak, piano type switches,5A (as Numbers per IS Specification).(Inspection by Consignee)

Supply of three pole plug and socket 5 Amp (as Numbers per IS Specification).(Inspection by Consignee)

Supply of Lamp 110V/24W, 2 Pin for Loc. Numbers (Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Supply of Apparatus Case with godown locks Numbers with detachable handle on both the doors Half Case as per Drg. No.SK 783-1 & 2 with latest alteration.(Inspection by RITES)

Supply of earth electrode assembly as per Numbers Drg.No. CR/S&T/SK-815. (Inspection by Consignee).

Supply of PVC jacketed wire rope for Track Lead Metre connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed or recycled material should not be used.(Inspection by Consignee)

Supply of 8 SWG GI wire (4mm dia) suitable for Kg track circuit rail bonding. As per IRS Specification S:13 - 62(Inspection by Consignee)

Supply of GI bend pipe, 'B' class, 50mm dia for Numbers cable entry in point machines, along with required fixing arrangements as per standard practice on Central Railway. As per Drg No.DRM (S&T).(Inspection by Consignee)

Supply of GI pipe, inner dia. 100mm dia. B-class Metre as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make.(Inspection by Consignee)

Supply of DWC HDPE pipe with one snap fit Metre coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver. 1.1 with Amd.1 or latest.(Inspection by Consignee)

Supply of RCC pipes half round of size 150mm Numbers 1400.00 dia outer and 100 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4.As per Drg No.DRM(S&T) SUR/06/2023/A (Inspection by RITES)

Supply of William stretcher nylon insulation set Set suitable for ground connection as per RDSO drg No T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23 & 40/84 with latest amendements.(Inspection by Consignee)

Supply of Tongue attachment nylon insulation Set set consisting of one insulating plate as per Drg no: RST-106961 & 3 nos of Ferrules with collars to suite rodding supplied as per RDSO spec & Drg.no: RST-10692(Inspection by Consignee).

Supply Gauge Tie plate nylon insulation as per Set RDSO drg No: T- 10372 Alt2, T- 10368, T- 10371 Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to the spec IRS S 23 & 40 with amendement 01 or latest amendements. (Inspection by Consignee).

Supply of ARA Terminal blocks with links made Numbers of PBT Specn No..IRS:S-75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA- 23741A Alt.4, SA-23745 Alt.5, SA-23746, SA- 23748 Alt.4 & SA-23756A Alt.3.(Inspection by RDSO) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Supply of cartridge fuse block made of PBT as Numbers per RDSO Drg No SA-23748 Alt 4, SA-23749 & Spec No IRS:S-75/2006 (Rev - 2) with latest amendment. Fuse block shall be suitable for round head type voltage fuses.(Inspection by RDSO)

Supply of round head type non detoriating type Numbers low voltage cartridge fuse as per Specn No IRS:S-78/92 with latest amendments 2A/4A/6A capacity.(Inspection by RDSO)

Supply of Paints as per relevant IS specification Kg preferably Asian/ Apcolite/Dulux make in different colours in 1 Kg/2 Kg pack.(Inspection by Consignee).

Supply of Channel Pins single groove, Numbers 2262.00 galvanised, 7 mm suitable for 4mm dia bonding wire as per spec No. IRS: S 17-75 Revision 3. (Inspection by Consignee). Total 1018713.73

Item Breakup - 02-SOR EXECUTION

Fixing of ARA Terminals and fuse blocks on Numbers phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts.This includes provision of two additional holes on the board on either side for cable conductor entry.

Termination terminal/fuse blocks in the apparatus Cases/ Conductor cable termination rack.This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.

Excavation and Casting of Apparatus Case Numbers foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.Half Case as per Drg No . SK-804

Erection of Apparatus Cases. This includes Numbers filling of location foundations with river bed sand and plastering Half Case.

Installation of earth electrode assembly as per Numbers Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No. CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor. SOLAPUR DIVISION-S AND T/CENTRAL RLY

Provision of bonding with contractor's PVC Numbers 1305.00 jacketed wire rope for Track Lead connection. PVC jacketed wire rope should be of Galvanised steel wire rope 6mm dia (6 x 19 stranded wire with steel core of 6 mm dia ) sheathed with PVC 2mm wall thickness, overall thickness being 10mm PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS:2266:2019. Reclaimed or recycled material should not be used. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own materials and tools as per instruction of Rly engineer at site.

Provision of bonding with GI wire 4mm dia ( 8 Numbers 1305.00 SWG) for track jumper & fish plate joints bonds. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly engineer at site.

Excavation of cable trench as per cable route cum plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. It if is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be made as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805

Excavation of cable trench as per cable route cum plan,1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be maden as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805

Cutting of all types of Roads/ platforms cum (ecxcept concrete type) for trenching and excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI /DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & instructions of Rly engineer at site. Drg. No. SK 807

Fixing of GI pipes for crossing the culverts, Metre bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site. SOLAPUR DIVISION-S AND T/CENTRAL RLY

Digging of trench 1.0 M deep from rail cum flange/road level (for LC) and 0.3Mtrs. to 0.6 Mtrs wide and back filling after placing of DWC/RCC/GI pipe.(Placing of DWC/RCC/GI pipe coverd separately. The ballast disturbed be screened and dressed as required by Engineer- in-charge or his representatives and road tarred immediately. Drg. No. SK 806

Laying of DWC/RCC pipes alongwith collars/RCC Metre Half round pipes in trenches at places of track and road crossings, platform cuttings etc.

Laying of signalling/Power/Telecom cable of Kilometre various cores/sizes in trenches.

Wherever depth of 0.5M cable trench is not cum feasible, cable shall be protected as under:- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench.

Painting of two coats of synthetic enamel paint Numbers over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor' own supply of paints.Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge.Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. Apparatus case Half Size.

Lettering / Numbering Termination particulars, Numbers equipments names etc., legibly and neatly inside location boxes. Half Case.

Transportation material/equipments including loading and u n lo a d in g in 10MT vehicle, anywhere to anywhere, and stacking at destination as per instructions of SSE in-charge as per inventory. For carrying heavy materials like cable drums, DG set, Electrical Lifting barrier pedestal, IPS, Batteries, Point machine etc.

Horizontal boring of cable duct of minimum 2.0 Metre Mtr. depth alongwith laying of 120mm HDPE pipe for track crossing with minimum depth reckoned from the bottom of the rail/road crossing with minimum depth reckoned from ground level. The work shall be done as per extant practice & instructions of site Engineer. Prepration of site for Horizondal boring shall be carried out in presence of Railway Representative. HDPE will be supplied by Railways. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. SOLAPUR DIVISION-S AND T/CENTRAL RLY

Erection, Fitting and Rail connection of Track Numbers Lead Juntion Box on two supports(M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be carried out as per Drg. No. SK-845 or/& instructions of Rly engineer at site. Total 2471855.74

Item Breakup - 03-NS SUPPLY AND EXECUTION

Execution of S & T work related to enginnering Job /Signalling block of CTR/TTR/TSR or others, in one block, five unskilled manpower have to be provided during block for S&T connection removing & refixing as per Railway site engineer instruction.

Supply of HSS Twist Drill Parallel shank 7.2 mm Numbers make-IT, Adison, JK or similiar. (Inspection by Consignee).

Electric track drilling machine equipment Numbers consisting of Heavy duty electric track drilling machine works on 110v 50Hz AC with suitable interchangeable track mounting stand with depth adjusting facility. Make of heavy duty electric drilling machine is of Rallies or Wolf or Bosch only. Detailed specification enclosed in Annexure. Make/Brand: Bosch model GBM13RE/Ralli wolf make or Similar.(Inspection by Consignee)

Providing Road breaker/Concrete Breaker with Hour compressor and jack hammer for railway work such as cutting and dismantling of road concrete/ Bricks pucca structure (RCC/Steel section)including contractor's fuel, driver and all other charges completed as directed by Engg in charge.

HDPE Pipe 110 mm Diameter,PE63, Class PN6, Metre with confirming to IS4984 with ISI marked (or) Latest.(Inspection by Consignee).

Hiring of machinery for minor miscellaneous Hour works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material.

Digital Card for SSDAC, Eldyne make part no Numbers 3CR31010PFAA, Make: Eldyne Electro systems Pvt Limited.(Inspection by RDSO).

Analog Card, Make - THALES, Part No. Numbers 3CR31011ABAB for AZLS type Single section digital Axle counter as per RDSO/Specn. No. RDSO/SPN/177/2012 (Ver.3) or latest, suitable with existing Single Section Digital Axle Counters (SSDAC).(Inspection by RDSO)

Mother Board, Make - THALES, Part No. Numbers 3CR35010AAAA for AZLS type Single section digital Axle counter as per RDSO/Specn. No. RDSO/SPN/177/2012 (Ver.3) or latest, suitable with existing Single Section Digital Axle Counters (SSDAC).(Inspection by RDSO) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Supply of Drill Bit 14 mm HSS (for BPAC Hole), Numbers Make : Taparia, J.K , Forbis or similar. (Inspection by Consignee).

SUPPLY OF CABLE ROUTE TRACER WITH Numbers RECHARGEABLE BATTERY PACK ALONG WITH 10 WATT TRANSMITTER. DETAILED SPECIFICATION AS PER ANNEXURE- A. WITH OEM TC/GC CERTIFICATE.(Inspection by RITES).

SK 30H DOUBLE RAIL CONTACT WITH 8 METER Numbers CABLE FOR MULTI SECTION TYPE DIGITAL AXLE COUNTER (MSDAC) AS PER RDSO SPN No. RDSO/SPN/176/2013. Ver.-3 (Or latest) MAKE ELDYNE ELECTRO SYSTEM PVT LTD.(Inspection by RDSO).

Deployment of manpower like unskilled Labour Man-Days to work in emergencies or as required during cable shifting, finding the existing cable route, shifting and placing of materials in depot etc.

Supply of grade 3 Lithium Base Grease for Kg Industrial purpose to IS: 7623 (Q3) SPL MP 3. (Inspection by Consignee)

Supply of white cotton waste, IS: 5485 Latest . Kg (Inspection by Consignee).

ALUMINIUM FINISHING FOR GENERAL PURPOSE TO IS: 2339/2013 (REAFFIRMED 2018) AND RDSO AMDT NO.1A REV-1.0 AS AN ADDITIONAL REQUIREMENT. PACKING IN 4 Ltrs. DUAL CONTAINER (ALLUMINIUM PASTE PACKED IN POLYURETHANE BAGS AND DIPPED IN 4 Ltrs CONTAINERS). (Inspection by Consignee). Total 4778144.37

02-SOR EXECUTION

03-NS SUPPLY AND EXECUTION